The Broad Wave CH-car 12 V Car Charger is a vehicle power accessory for charging a two-way radio that uses the same port. Its 50 cm cable gives an equipment manager a concrete measurement to compare with the distance between the vehicle power point and the planned radio position before assignment. The accessory can also power a modem in a car, giving it a second vehicle-based role without changing its core purpose. Within the Broad Wave accessory family, CH-car is the power-focused choice, while EAR-WALKIE serves the audio side of radio use. That distinction keeps selection practical: consider CH-car when the requirement is to charge a radio through a matching port or provide in-car power to a modem.<\/p>\n
Deployment starts by checking that the vehicle power arrangement matches 12 V, then comparing the cable end with the port on the intended equipment. The same-port condition is central to radio compatibility, so the check should use the actual radio being assigned rather than a general assumption about the two-way-radio category. Once the connection matches, the 50 cm cable defines how far the equipment can sit from the power point. An installer can use that measurement to choose a nearby position inside the cabin and keep the cable route aligned with the organisation’s vehicle-equipment layout.<\/p>\n
For procurement, CH-car turns into a concise set of receiving criteria: Broad Wave brand, CH-car model, car use, 12 V vehicle voltage, 50 cm cable, and a matching equipment port. Those points can be placed on an asset label and tied to the vehicle or radio that passed the fit check. This matters when an organisation operates several radio models or moves equipment between drivers and shifts. A category name alone cannot establish the required port match, while a recorded assignment gives stores staff and technicians a clear reference. A separate CH-car unit can be assigned to the modem role under the same connector and placement checks.<\/p>\n
In logistics fleets, CH-car can stay with an operating vehicle that carries a compatible two-way radio, keeping a charging option available as the driver moves between a warehouse and delivery points. Facilities teams can assign the cable to maintenance vehicles that rely on radio contact while travelling between sites, with the accessory recorded against the vehicle after the port is checked. Security and site-management teams can follow the same process for patrol or supervisory vehicles: identify the radio, compare the port, plan its position around the cable length, and then retain the charger with that vehicle. The value is operational because the power accessory stays associated with the equipment it was selected to serve.<\/p>\n
The modem use can support a field vehicle that needs a modem powered in the car, subject to the same port and vehicle-voltage checks. Operations teams can separate units assigned to radios from units assigned to modems even though the model supports both roles. A stores label can state the intended equipment for each piece, preventing visually similar accessories from circulating without a confirmed match. If the cable moves to another vehicle, staff can repeat the check for the power point, available distance, and device port. This approach suits service companies that manage multiple vehicles and want accessory assignments based on a verifiable fit.<\/p>\n
The decision between CH-car and EAR-WALKIE starts with the job each accessory performs. CH-car supplies the vehicle-power path, while EAR-WALKIE is an earpiece with separate microphone and earpiece plugs. They address different deployment gaps and are not substitutes within a field kit. When the missing item is an in-car charging connection for a radio or a way to power a modem, CH-car is the model to assess. When the requirement is discreet audio communication through a compatible radio, the sibling earpiece follows the relevant path. This functional split helps an operations manager assemble a kit without confusing a power interface with an audio interface.<\/p>\n
The same distinction can shape a purchase request. Begin with the task: vehicle power or user audio. On the vehicle-power path, record the CH-car requirements of 12 V, 50 cm, and a matching port, then have the intended vehicle and device checked before allocation. The model is therefore chosen through operating environment, cable reach, and physical connection instead of family name alone. Stores staff can also see which item belongs in the vehicle and which accessory is issued to the individual user, simplifying handover at shift changes.<\/p>\n
Before CH-car enters service, verify the model name on the stock record, confirm the 12 V vehicle arrangement, and map the 50 cm route from the power point to the equipment. Port matching should be performed with the target device because compatibility is defined by the shared port. After a successful check, the charger can be associated with an internal vehicle or equipment reference and kept with that assignment across shifts. If it is allocated to a modem, the stores record can state the in-car modem role so that the cable is checked again before any later reassignment to a radio.<\/p>\n
At issue, the technician can inspect the cable, confirm that it remains with the approved equipment, and position the device within the available cable reach. In a larger fleet, a clear label carrying CH-car, 12 V, and 50 cm helps distinguish the accessory when similar leads are stored together. A vehicle checklist can also separate the charger, radio, modem, and earpiece so the crew understands the purpose of each item before departure. The final selection criteria stay direct and actionable: a suitable 12 V vehicle setting, an installation distance within the cable length, and a radio or modem with the matching port.<\/p>\n","protected":false},"excerpt":{"rendered":"
A car charger with a 50 cm cable for two-way radios that use the same port. It can also power a modem in a car.<\/p>\n","protected":false},"featured_media":2280,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[318],"product_cat":[381],"product_tag":[],"class_list":["post-2278","product","type-product","status-publish","has-post-thumbnail","product_brand-broad-wave","product_cat-batteries-chargers","first","onbackorder","sale","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2278","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/comments?post=2278"}],"version-history":[{"count":2,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2278\/revisions"}],"predecessor-version":[{"id":3053,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2278\/revisions\/3053"}],"wp:attachment":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/media?parent=2278"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_brand?post=2278"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_cat?post=2278"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_tag?post=2278"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}