{"id":2294,"date":"2026-08-28T05:02:45","date_gmt":"2026-08-28T02:02:45","guid":{"rendered":"https:\/\/risys.sa\/?post_type=product&p=2294"},"modified":"2026-08-28T05:02:45","modified_gmt":"2026-08-28T02:02:45","slug":"icom-2300h-144-mhz-fm-mobile-transceiver","status":"publish","type":"product","link":"https:\/\/risys.sa\/en\/product\/icom-2300h-144-mhz-fm-mobile-transceiver\/","title":{"rendered":"Icom 2300H VHF FM Mobile Transceiver 65 W"},"content":{"rendered":"

The Icom IC-2300H VHF Mobile Transceiver concentrates on direct analog FM communication in the 2 m band, giving a buyer a balanced choice for a vehicle or fixed operating point without adding dual-band complexity. The EXP version reaches 65 W and also provides 25 W, 10 W, and 5 W settings, while the upper limits differ for the KOR and TPE versions. Its memory organization, scanning tools, strong front-facing audio, and readable display support routine team communications rather than feature-heavy operation. This positioning suits a facilities, security, or field operations manager who needs a dedicated VHF radio that can be installed consistently and programmed to a common plan across a fleet.<\/p>\n

How the Icom IC-2300H VHF Mobile Transceiver Works in Practice<\/h2>\n

The radio provides 207 memory channels, arranged as 200 regular memories, 6 scan edges, and 1 call channel. That structure lets a radio coordinator separate site, team, or task channels while keeping scanning boundaries under control. Dynamic Memory Scan works with 10 memory banks, so an operator can scan selected banks rather than every programmed channel on every shift. Each channel can carry a 6-character name, enough for a compact site or team code that is easier to recognize at a glance than an unexplained channel number.<\/p>\n

Signaling tools include built-in CTCSS and DTCS encoding and decoding, tone scan, Pocket Beep, and DTMF autodial. In a working system, these functions help organize repeater access or workgroups and keep the speaker quiet when traffic is not intended for the selected group. Multiple scan functions support monitoring based on the operator’s assignment. Because the IC-2300H uses analog FM, the buying decision should align with the site’s established analog VHF infrastructure and the frequency plan that the communications administrator intends to program.<\/p>\n

Audio and Front-Panel Visibility<\/h3>\n

Typical audio output is 4.5 W at 10% distortion into a 4 ohm load, a useful consideration in a service vehicle or control room where background sound varies through the day. A 2-conductor 3.5 mm external speaker connector supports a 4 ohm speaker when the installation needs audio closer to the driver or dispatcher. The 70.6 x 20 mm LCD has selectable amber, yellow, or green backlighting, allowing the installer to match the display to a vehicle dashboard or the lighting conditions at a fixed operating desk.<\/p>\n

Where It Fits in Saudi Operations<\/h2>\n

The IC-2300H fits maintenance and facilities vehicles working on an analog VHF network, especially when the driver needs one primary operational channel plus separate banks for areas or teams. It can also serve at a guard post or operating desk equipped with a suitable DC supply and external antenna, giving the supervisor a fixed point for following field calls. Service yards, warehouses, and distributed work sites that coordinate vehicle movements can use its selectable output levels as part of a planned radio system. Actual coverage still depends on the antenna system, frequency plan, installation, and terrain, so the key benefit is controlled RF output rather than an unsupported distance claim.<\/p>\n

The operating temperature range extends from -10 C to +60 C, which matters when a unit will remain inside vehicles or equipment rooms exposed to wide temperature changes. The radio meets MIL-STD 810 G and equivalent MIL-STD-810-C, -D, -E, and -F requirements. Those qualifications do not replace correct mounting, but they give a project manager a defined basis for assigning the unit to a mobile fleet exposed to vibration and everyday movement.<\/p>\n

Positioning Against Named Icom Siblings<\/h2>\n

The IC-2300H and IC-2730E follow different operating priorities. This model is centered on single-band 2 m VHF operation, a direct interface, and a smaller memory plan. The IC-2730E is the family choice for dual-band operation, simultaneous reception, and a broader channel structure. The IC-2300H therefore makes sense when the site’s communications plan stays on one VHF band and the team wants fewer band-selection steps in front of the driver. The IC-2730E fits a control position that must follow two bands or organize a larger set of groups. The HM-152 is a replacement hand microphone for selected Icom equipment, not a self-contained transceiver and not an operational substitute for either radio.<\/p>\n

Fleet consistency is another practical part of the IC-2300H’s role. It supports PC-to-radio and radio-to-radio cloning with the optional CS-2300H software and an appropriate cloning cable. A coordinator can use that capability to reproduce approved channel names, memory banks, tones, and scan settings across similarly equipped vehicles instead of entering them repeatedly at each front panel. The correct regional version should be identified before programming and deployment because frequency coverage and maximum output differ by version.<\/p>\n

Power, Antenna, and Installation Notes<\/h2>\n

The transceiver requires 13.8 V DC with a +\/-15% tolerance. Current draw is 11 A while transmitting at 65 W, 0.4 A in receive standby, and 1.5 A at maximum receive audio. These figures help a vehicle electrician choose a suitable feed and fuse and avoid placing the radio on an undersized shared circuit. The antenna connection is SO-239 at 50 ohm, so the feed line, connector, and antenna need to match that arrangement and the intended VHF operating range.<\/p>\n

The main unit measures 140 x 40 x 162 mm excluding projections and weighs approximately 1.1 kg. Those measurements let the installer check dashboard, console, or equipment-shelf clearance before drilling or routing cables. Supplied equipment includes the HM-133V remote-control microphone, mounting bracket kit, a version-dependent microphone hanger, DC power cable, and spare fuses. This provides the core mounting package, while antenna selection, cable routing, ventilation, and the approved channel plan remain deployment decisions for the specific vehicle or site.<\/p>\n

Package Contents<\/h2>\n