The Motorola WPLN4189A IMPRES Six-Pocket Charger is intended for organisations that return DP3000e series radios to a central equipment point. Its six pockets arrange several radios or batteries in one station, while the maintenance system and IMPRES intelligent charging give the unit a defined role in the equipment return cycle. It supports Li-Ion, NiCd, and NiMH batteries and operates at 230 V with a European plug. This positioning fits a Saudi communications room where radios are issued and collected across shifts instead of chargers being distributed among separate desks. The buying decision should account for station space, radio series, battery chemistry, and any accessory attached to the handset, because certain DP3000e configurations require the PMLN5010 insert and a specific DP3661e battery arrangement is incompatible.<\/p>\n
WPLN4189A provides six pockets in a multi-unit charger, allowing an operations team to create a single location for collecting and preparing communications equipment. A supervisor can assign the station to a security room or operations centre and direct compatible radios there after use. This keeps equipment moving through a visible path from return to charging and then back to issue. It also reduces the need to distribute separate charging units across offices when the site’s policy is based on central collection. Because the unit has no display, the internal process should identify the radios and batteries by model and pocket position, with each configuration checked before it is placed in the station.<\/p>\n
WPLN4189A combines IMPRES intelligent charging with a maintenance system in the same station. For a fleet coordinator, that means the charger is not simply a surface for gathering radios; it is a dedicated component in the handling cycle for compatible IMPRES batteries. Support for Li-Ion, NiCd, and NiMH also lets an organisation manage different battery chemistries within the compatible range without assuming that every battery fits every handset. The practical control is to register chemistry and radio model together, then apply the insert requirement and incompatible configuration rule before charging. This matters in stores containing similar-looking battery packs, where the identity of the battery, radio, and attached accessory is more dependable than appearance.<\/p>\n
The charger fits equipment rooms in commercial compounds, warehouses, service facilities, and operations centres using the DP3000e series. At a security site with rotating shifts, handsets can return to the WPLN4189A station after check-in and be issued again from the same location under the organisation’s procedure. Facilities departments can collect technicians’ radios at a known point instead of searching for chargers spread between workshops. Event and field-service companies can use the same central arrangement when coordinators return devices to an equipment desk. The decision is tied to fleet movement: when radios routinely come back to one room, the six pockets support a collective process for receiving, preparation, and redistribution.<\/p>\n
WPLN4189A is compatible with the DP3000e series, but the physical configuration presented to the charger needs close attention. DP3441, DP3441e, and DP3661e radios require the PMLN5010 insert when an accessory is attached to the handset. Procurement staff should therefore establish whether radios will arrive at the station with accessories still fitted and include the required insert in the site arrangement when that condition applies. Receiving staff can keep PMLN5010 with the charging station and link its use to the named models rather than leaving the decision to a user at shift end. This turns general series compatibility into an actionable check based on the radio’s assembled form at the point of charging.<\/p>\n
One arrangement must be kept out of the WPLN4189A station: a DP3661e radio attached to a PMNN4502 or PMNN4511 IMPRES battery. This condition is important when DP3661e handsets are sorted for charging, because the radio series alone does not approve every battery combination. Staff should read the fitted battery model, associate it with the handset, and route the incompatible configuration away from this charger. An internal notice beside the station can name DP3661e, PMNN4502, and PMNN4511 to support consistent shift handovers. That model-level control prevents a broad series match from overriding the specific battery restriction.<\/p>\n
Against the PMPN4572A sibling, WPLN4189A stands out when the required criterion is its own six-pocket design and central charging role. It fits an organisation that collects a group of DP3000e radios in one room and wants receipt, charging, and reissue to remain at a common point. Distributing chargers near individual users represents a different deployment pattern within the family. A buyer can decide by tracing what happens to the handset after use: if it returns to a store or operations desk, WPLN4189A supports that collective route; if it remains at a separate post, the deployment need changes. Battery types, attached accessories, and the special DP3661e condition should be checked before quantity is approved.<\/p>\n
WPLN4189A measures 152 \u00d7 450 \u00d7 300 mm in height, width, and depth, giving facilities staff a direct basis for reserving a suitable surface before installation. It operates at 230 V with a European plug, so the assigned electrical point should match that arrangement. The product is CE certified, and that certification can be retained with the unit model in internal receiving documentation. On arrival, staff can reconcile the WPLN4189A name, pocket count, plug, and intended station, then define where the PMLN5010 inserts are stored and how the incompatible DP3661e configuration is flagged. These preparations make the charger a controlled part of the radio-management process rather than an accessory without an assigned workflow.<\/p>\n","protected":false},"excerpt":{"rendered":"
A six-pocket IMPRES multi-unit charger with a maintenance system for Li-Ion, NiCd, and NiMH batteries used with the DP3000e series. It operates at 230 V with a European plug and carries CE certification.<\/p>\n","protected":false},"featured_media":2577,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[184],"product_cat":[381],"product_tag":[],"class_list":["post-2573","product","type-product","status-publish","has-post-thumbnail","product_brand-motorola","product_cat-batteries-chargers","first","onbackorder","sale","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2573","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/comments?post=2573"}],"version-history":[{"count":2,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2573\/revisions"}],"predecessor-version":[{"id":3381,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2573\/revisions\/3381"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/media\/2577"}],"wp:attachment":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/media?parent=2573"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_brand?post=2573"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_cat?post=2573"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_tag?post=2573"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}