The OEM \/ Unbranded MT777MUC Rapid Radio Charger brings 6 charging ports together in one station for compatible Puxing and Motorola radios. Its main operational benefit is the ability to centralise the return and charging of several team radios instead of spreading individual chargers across a site. It supports the Puxing PX-777 Plus, PX-888K, and PX-328, as well as the Motorola MT-777. Rapid charging takes approximately 2-3 hours depending on battery state. The station can be wall-mounted or placed on a desk using its flip-out brackets. Integrated overcharge, overheat, and short-circuit protection further supports a controlled charging point for a security room, operations centre, equipment store, or shared radio issue desk.<\/p>\n
The 6-port format suits organisations that return radios to a common equipment point after a shift or before reassignment. An asset coordinator can give the station a permanent location and direct users to return compatible devices there rather than leaving each radio with a separate charging arrangement. This approach makes preparation easier to observe and reduces the number of power units and cables distributed between desks. The approximate 2-3 hour rapid-charging period helps a supervisor plan a preparation window between shifts, while the condition attached to that time remains important: the actual period depends on the battery state at the start. A practical routine links charging to the return time and checks readiness before each radio is issued again.<\/p>\n
MT777MUC is an infrastructure accessory for a radio fleet rather than a communications device. It does not add channels or radio range; its role is to organise the power stage between the end of one task and the beginning of the next. That role matters to a facilities or security manager who wants a known place for collecting and preparing compatible handsets. The station can be identified by model in the local asset process, linked to its approved radios, and assigned to a staff member who checks that devices return to the charging area. Bringing 6 ports into one body supports that process without confusing the charger model with the Puxing and Motorola models it serves.<\/p>\n
The purchase decision starts with compatibility. This station supports Puxing PX-777 Plus, PX-888K, PX-328, and Motorola MT-777 radios. Procurement staff can match the exact model name on equipment already used at the site against one of those names before approving a quantity. Similar casework or battery-base shapes do not establish a match, and brand alone is not a sufficient control. For a mixed fleet, a clear label beside the charger can show model MT777MUC and the four compatible radio models, while other devices follow a separate charging route. This simple control makes shift handovers more orderly and prevents staff from treating the unit as a general-purpose charger for every radio in the organisation.<\/p>\n
The charging circuit provides defined outputs for several battery configurations: 2-cell Li-Ion at 8.7 V and 500 mA, 6-cell Ni-MH at 9.4 V and 500 mA, and 1-cell Li-Ion at 4.2 V and 500 mA. These values help a technician understand the charging profiles used within the compatible equipment, but they do not automatically extend compatibility to every battery that shares the same chemistry. Exact radio-model matching remains the first step, followed by confirmation of the battery configuration and its applicable output. This sequence keeps a purchase decision from relying only on a Li-Ion or Ni-MH label.<\/p>\n
In facilities management, MT777MUC can sit in an equipment room that receives radios from maintenance and guarding teams at the end of duty. A supervisor can link the 6 ports to a defined return, check, charge, and reissue routine. Warehouses and logistics centres can use the same central point for radios moving between gates, receiving desks, and loading areas, provided their handsets appear on the compatibility list. Hotels and retail complexes can place the station in a security office or service area so staff radios are prepared before patrols begin. Event operations teams can collect compatible radios in one location after a task and begin an organised charging cycle before the next operating period.<\/p>\n
The same benefit applies to sites running multiple shifts. One team can return its radios to the station while the equipment coordinator tracks the approximate charging window before the next issue. Because the station has 6 ports, planners can compare that capacity with the number of compatible devices expected to return at the same time. If operations span several buildings, station placement can follow the real radio-return points instead of placing charging far from the handover route. These are practical deployment decisions grounded in the product’s central function: recharging several compatible radios at a defined, manageable location.<\/p>\n
The station measures 490 x 100 x 60 mm and weighs 1135 g. Those figures give a site manager a direct basis for allocating space before installation, whether the unit will sit horizontally on a work surface or be mounted on a wall. Flip-out desk brackets support surface placement, while the wall-mounting option keeps the station away from a desk used for other tasks. Before confirming the position, staff can mark out the 490 mm length, 100 mm width, and 60 mm height on the intended area, then check that the charging ports and power connection remain accessible during radio handover.<\/p>\n
The 1135 g weight is also relevant when selecting a permanent position in an equipment cabinet, issue room, or shared service area. The installation team can assess the chosen surface or wall under the site’s normal procedures and route the power lead away from walking paths and the radio handling area. The two supported mounting approaches allow the choice to follow workflow. Desk placement can suit a staffed issue point where a coordinator handles radios beside the station. Wall placement can suit a location where freeing the work surface and establishing a defined vertical charging point matter more. In either arrangement, accessibility and correct radio matching remain central.<\/p>\n
The power adapter accepts 100-240 V at 50\/60 Hz and 0.8 A, then supplies 15 V at 3.0 A to the charger. The charger input is 15 V at 3 A. This sequence identifies the relationship between the power supply and station, helping technicians keep the correct components together. The adapter is model QSC-706A, while the charger is model QSC-706S-D(1\/2\/3\/4). Both model names can be added to receiving and asset labels so the power unit remains associated with the station during relocation, inspection, or servicing. The 100-240 V input range also gives the site team a clear electrical reference when preparing the intended location.<\/p>\n
Protection covers overcharging, overheating, and short circuits. These circuits operate within the charging unit and add a protective layer when the station is used with its intended equipment. A site manager can include these functions in the charging-point assessment while continuing to follow the organisation’s electrical, cable-routing, and inspection procedures. The protection features do not change the compatibility requirement or remove the need to match the adapter and charger. Their most useful context is an organised station comprising the QSC-706A supply, QSC-706S-D(1\/2\/3\/4) charger, compatible radio models, and a permanent location that operations staff can reach and supervise.<\/p>\n
The package contains the 6-unit universal rapid charger, a power supply, and a country power cord. Receiving staff can reconcile those components with the ordered item before moving the station to its working location. The main unit can then be identified as MT777MUC, with adapter model QSC-706A and charger model QSC-706S-D(1\/2\/3\/4) attached to the asset entry. The compatible Puxing and Motorola model list can also be placed in local operating guidance. This arrangement tells warehouse staff which pieces must remain together, tells supervisors which radios belong on the station, and gives technicians a traceable power path from the adapter input to the charger input and battery outputs.<\/p>\n
MT777MUC suits an organisation that operates one or more Puxing PX-777 Plus, PX-888K, PX-328, or Motorola MT-777 radios and wants charging consolidated into a 6-port station. Its operational case also includes an approximate 2-3 hour charging period depending on battery state, wall or desk installation, 100-240 V adapter input, and three integrated protection functions. A buyer can compare the number of radios returning together, shift handover points, and available installation space with this profile. Where models match and the objective is to organise return, charging, and reissue, the station provides a direct and manageable role in the equipment plan.<\/p>\n","protected":false},"excerpt":{"rendered":"
A 6-port rapid charger for compatible Puxing and Motorola radios, with an approximate 2-3 hour charging time depending on battery state. It supports wall or desk placement and includes overcharge, overheat, and short-circuit protection.<\/p>\n","protected":false},"featured_media":2730,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[403],"product_cat":[381],"product_tag":[],"class_list":["post-2728","product","type-product","status-publish","has-post-thumbnail","product_brand-oem-unbranded","product_cat-batteries-chargers","first","onbackorder","sale","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2728","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/comments?post=2728"}],"version-history":[{"count":2,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2728\/revisions"}],"predecessor-version":[{"id":3205,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2728\/revisions\/3205"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/media\/2730"}],"wp:attachment":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/media?parent=2728"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_brand?post=2728"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_cat?post=2728"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_tag?post=2728"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}