The Scope Systems TS2-55 Armoured Telephone Handset is designed for fixed communication points that need more mechanical protection than an ordinary telephone cord provides. Its practical distinction is a 55 cm stainless-steel armoured cord paired with an impact- and weather-resistant PC\/ABS housing. The handset is compatible with analog and IP wall phones, placing it within fixed telephone systems used across operational sites. Its cord construction includes a SUS 302 spiral hose and a steel cable with a load capacity exceeding 170 kg, together with a Teflon conducting wire and insulation specified at DC > 500 V. Audio components are identified as an SG9767 transmitter and M150H receiver, giving project teams concrete references when matching a handset to a wall-phone installation.<\/p>\n
TS2-55 serves a person who approaches a wall phone to place or answer a call at an established work point. The telephone remains mounted while the handset provides the held listening and speaking component on a 55 cm cord. This arrangement suits a location where the expected movement around the telephone is known and can be planned around that specified length. Stainless-steel armour protects the connection path against pulling and contact during handling, while the PC\/ABS housing addresses impact and weather exposure around the handset itself. For an operations manager, the central benefit is a fixed telephone point built around identifiable durability characteristics that can be inspected at receipt and during maintenance, rather than a lightly protected cord used where repeated handling is expected.<\/p>\n
The cord path combines several specified materials, each relevant to mechanical protection or electrical connection. Stainless-steel armour forms the external protective arrangement, and the spiral hose within the construction is SUS 302. The internal steel cable has a load capacity of over 170 kg, giving an engineer or procurement manager a defined mechanical value to compare with the site’s requirement. Teflon is used for the conducting wire, accompanied by insulation specified at DC > 500 V. Reviewing these elements together gives the buyer a complete view of the cable path: outer armour, steel support, conducting wire, and insulation. This makes the selection depend on a known construction rather than an unspecific description such as a heavy-duty telephone handset.<\/p>\n
The handset housing uses PC\/ABS and is characterised as impact- and weather-resistant. Those properties matter at wall-phone points handled by multiple users or positioned near continuous operational activity. Facilities managers can assess TS2-55 for service rooms, security posts, facility entrances, loading areas, and operational corridors that already use a compatible wall phone. In each case, the reason for selection should stay precise: the point needs a fixed handset with a protected cord and a housing suited to impact and weather exposure. Framing the requirement this way helps procurement associate the product with a defined deployment location. It also gives receiving teams tangible characteristics to inspect, including the housing material and armoured cord type, instead of relying only on the model label.<\/p>\n
At an industrial facility, TS2-55 can serve a wall-phone station used by operations staff from a fixed position, especially where the handset cord receives frequent handling. In warehouses and loading areas, its impact and weather resistance can be considered when assessing a communication point near the movement of personnel and equipment. Commercial properties and large facilities can also include it in the requirements for service-room or security-point telephones that need an armoured cord. The same construction is relevant to infrastructure sites using an analog or IP wall phone. The decision should follow the actual point rather than the sector name alone: a compatible telephone, a movement envelope suited to 55 cm, and a genuine need for the specified housing and cable protection.<\/p>\n
The handset supports analog wall phones and IP wall phones, so the compatibility review begins by identifying the telephone type already installed or planned. A systems engineer can record TS2-55 as the handset model and associate it with the wall-phone type on the project’s equipment schedule. During replacement work, the SG9767 transmitter and M150H receiver references help define the required audio components instead of depending on general handset compatibility. That level of identification matters because wall-phone handsets may appear similar while using different internal parts. Recording Scope Systems as the brand, TS2-55 as the model, the telephone type, and both audio component references gives procurement and technical teams common checkpoints before the unit is ordered and connected.<\/p>\n
The specified 55 cm cord length is a deployment factor to review before the telephone point is fixed. An installer can compare the distance between the handset rest and the expected holding position, then confirm that the cord supports the intended movement without forcing an impractical telephone location. The armoured cable route should also be checked so it remains accessible and avoids edges that could interfere with routine handling. Where weather exposure is part of the location, mounting direction and telephone placement belong in the site review alongside the housing’s weather-resistant characteristic. After installation, the team can test lifting and returning the handset, then confirm listening and speaking through the SG9767 transmitter and M150H receiver before releasing the point for operational use.<\/p>\n
On receipt, site staff can match the Scope Systems brand and TS2-55 model to the purchase line, then inspect the 55 cm armoured cord and PC\/ABS housing. The asset record or technical inspection can capture the SUS 302 hose material, steel-cable load capacity of over 170 kg, Teflon conducting wire, and DC > 500 V insulation specification. These fields create a repeatable reference for later receipts and for replacement work at an established location. Maintenance teams can also add SG9767 and M150H to the item identity, reducing the chance of selecting a different audio component when a replacement is requested. The final functional check can be completed on the analog or IP wall-phone system used at the intended site.<\/p>\n
TS2-55 fits an organisation seeking a handset for a compatible wall phone and treating mechanical protection as a purchase criterion. The stainless-steel armoured cord, 55 cm length, and impact- and weather-resistant PC\/ABS housing define its day-to-day value. SUS 302 construction, steel-cable capacity exceeding 170 kg, Teflon conducting wire, and insulation at DC > 500 V provide further project-review details. The SG9767 transmitter and M150H receiver support accurate identification of the audio path. For a facilities, security, or operations manager, the selection makes sense when those characteristics align with a fixed analog or IP telephone point, the available reach, and the way employees will handle the handset at the site.<\/p>\n","protected":false},"excerpt":{"rendered":"
An armoured handset for analog and IP wall phones, fitted with a 55 cm stainless-steel armoured cord. Its impact- and weather-resistant PC\/ABS housing supports fixed communication points exposed to demanding handling.<\/p>\n","protected":false},"featured_media":2788,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[410],"product_cat":[371],"product_tag":[],"class_list":["post-2786","product","type-product","status-publish","has-post-thumbnail","product_brand-scope-systems","product_cat-handheld-radios","first","onbackorder","sale","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2786","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/comments?post=2786"}],"version-history":[{"count":2,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2786\/revisions"}],"predecessor-version":[{"id":3350,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product\/2786\/revisions\/3350"}],"wp:attachment":[{"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/media?parent=2786"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_brand?post=2786"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_cat?post=2786"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/risys.sa\/en\/wp-json\/wp\/v2\/product_tag?post=2786"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}