{"id":4365,"date":"2026-08-28T04:21:50","date_gmt":"2026-08-28T01:21:50","guid":{"rendered":"https:\/\/risys.sa\/?post_type=product&p=4365"},"modified":"2026-08-28T04:21:50","modified_gmt":"2026-08-28T01:21:50","slug":"grandstream-gwn7700p-unmanaged-poe-gigabit-ethernet-switch","status":"publish","type":"product","link":"https:\/\/risys.sa\/en\/product\/grandstream-gwn7700p-unmanaged-poe-gigabit-ethernet-switch\/","title":{"rendered":"Grandstream GWN7700P 5-Port PoE Gigabit Switch"},"content":{"rendered":"

Grandstream GWN7700P combines unmanaged Gigabit switching with PoE delivery for a deliberately small endpoint group. It has five RJ45 ports supporting 10\/100\/1000 Mbps, while ports 1-4 provide IEEE 802.3af\/at power at up to 30 W per port within a total 60 W PoE budget. This layout suits a branch, office, or service point that wants to reduce separate endpoint adapters without adopting a switch that needs ongoing management. The metal enclosure measures 145 x 80 x 27 mm and supports desktop or wall mounting. Within the family, this model occupies the compact powered position: more deployment flexibility than the data-only version, with port count and available power intended for a controlled, documented installation.<\/p>\n

How Grandstream GWN7700P serves a site<\/h2>\n

This model can form a small network point where compatible endpoints receive data and electrical power through the same Ethernet cable. An operations team can assign devices to the four PoE-capable interfaces and use the remaining RJ45 port according to the local connection plan. All five interfaces support 10\/100\/1000 Mbps, allowing each link to negotiate an appropriate rate. Unmanaged operation removes a day-to-day switch configuration task, but it does not remove the need for power planning. The installer should record each intended endpoint, its power requirement, and its assigned port before deployment. That simple schedule makes the shared budget visible and prevents port count from being mistaken for simultaneous power capacity.<\/p>\n

Plan the PoE load precisely<\/h2>\n

Ports 1-4 support IEEE 802.3af\/at and each can supply up to 30 W, but the device has a total PoE budget of 60 W. The per-port ceiling therefore cannot be multiplied across every powered port without considering the shared limit. A useful deployment worksheet maps each endpoint to a port, records its required power, and totals the planned load. Equipment that exceeds the individual limit or does not match the listed standards should not be assumed compatible. The fifth RJ45 interface remains available for network use, but it is outside the stated PoE range of ports 1-4. Labeling that distinction at installation helps prevent a powered endpoint from being moved to the wrong connection during later maintenance.<\/p>\n

Saudi business deployment examples<\/h2>\n

The GWN7700P can fit a small shop, professional office, reception area, or secondary operations room with a limited group of PoE endpoints. Carrying data and power in one Ethernet run can make endpoint placement less dependent on a nearby wall socket, while the switch and its adapter remain at a central point. Wall mounting is useful when the network device should stay off a busy desk, and desktop positioning keeps the interfaces accessible in a workspace where cables change. Suitability still comes down to specific checks: the endpoint count, IEEE 802.3af\/at compatibility, the demand placed on each powered port, and the combined demand against the 60 W budget.<\/p>\n

Switching resources and daily operation<\/h2>\n

The GWN7700P provides 10 Gbps switching capacity and a 2K MAC address table. Auto MDI\/MDIX simplifies connection to different Ethernet equipment by removing the need to select a cable based on the two link ends. These resources support the switch\u2019s role as a small Gigabit aggregation point. Its unmanaged design keeps setup requirements modest, yet good port documentation remains worthwhile. Cable labels and an endpoint-to-port record help technicians identify powered connections and understand the electrical load during a change. Before adding or replacing any endpoint, the operator should recalculate the PoE total and confirm the relevant per-port requirement. That workflow reduces avoidable power-allocation problems without creating a separate switch-management burden.<\/p>\n

Contrast with the named siblings<\/h2>\n

Compared with GWN7700, GWN7700P adds IEEE 802.3af\/at delivery on ports 1-4, whereas GWN7700 handles data without PoE. GWN7701PA extends PoE to all of its interfaces, carries a larger power budget, and adds rack mounting, positioning that model for a broader powered endpoint group or a more structured equipment area. GWN7702P also supplies PoE across more interfaces than GWN7700P. This makes the present model a sensible middle choice when PoE is mandatory but the endpoint schedule remains small enough for its port layout and budget. A larger sibling does not replace load calculation, while the non-PoE sibling cannot serve an endpoint that depends on Ethernet-delivered power.<\/p>\n

Power supply and physical installation<\/h2>\n

The switch takes external 48-53.5 V \/ 1.22 A power. Its consumption without powered devices is 2 W; attached PD loads must then be considered within the stated PoE plan. Place the adapter and switch where electrical access is dependable and cables can reach the interfaces without pulling on connectors. The metal enclosure can rest on a desktop or be wall mounted according to the branch layout. Before power-up, identify the four PoE interfaces, verify each endpoint load, label the cables, and define the network connection. The box includes the GWN7700P switch, power adapter, and quick installation guide. Any other mounting or cable accessory should be treated as a separate site requirement rather than assumed to be in the package.<\/p>\n

When this model is the right choice<\/h2>\n

Select the GWN7700P when the brief calls for five Gigabit interfaces, unmanaged operation, four IEEE 802.3af\/at powered ports, a 60 W shared budget, and desktop or wall mounting. It is particularly well suited to a small deployment whose loads can be itemized before installation. Confirm that every powered device stays within 30 W on its port and that their combined demand remains inside the total budget. If all endpoints already have local power, GWN7700 may cover the network requirement with a simpler power boundary. If more powered connections are required, compare GWN7701PA and GWN7702P against the site plan. This keeps the purchasing decision tied to actual port assignments, endpoint compatibility, and mounting needs rather than to the family name alone.<\/p>\n

Package Contents<\/h2>\n