Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandAPC

APC SMC1000I-2UC Smart-UPS 1000 VA 2U Rackmount UPS

A 1000 VA / 600 W APC Smart-UPS in a 2U rack chassis with AVR, a graphic LCD and 4 IEC C13 outlets. Rack-mounting brackets and a USB cable ship in the box.

Battery Detailslead-acidDisplaygraphic LCDModelSMC1000I-2UCMountingrackmount 2UPower600 WUps Power1000 VA

Original price was: 1,925.57 SAR.Current price is: 1,810.04 SAR. excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order10 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

APC SMC1000I-2UC is the rack-mount Smart-UPS to start from when a cabinet needs dependable backup but not the headroom, or the price, of the larger units in the range. It is rated at 1000 VA and 600 W, runs on a 230 V supply, and fits into 2U of rack height with 4 IEC C13 outlets on the rear. That combination covers the core of a small network or security rack: a switch, a router, a video recorder and an access control panel, provided their combined draw stays within 600 W. Automatic voltage regulation (AVR) handles routine sags and surges, a graphic LCD shows the unit’s state at a glance, and USB and serial ports connect it to a host for monitoring and orderly shutdown. For buyers weighing protection against budget, this is the balanced middle of the family.

What APC SMC1000I-2UC does in a rack

Between the mains feed and the rack, the UPS has two jobs. The first runs all the time: AVR corrects moderate under-voltage and over-voltage on the 230 V supply without switching to battery, which keeps the internal lead-acid battery in reserve for real outages. In buildings where the supply dips each time large cooling loads start, that difference shows up as fewer battery transfers. The second job begins when the supply fails: the unit carries the connected equipment on battery so it can ride through a short interruption or shut down cleanly instead of losing power in the middle of a disk write.

The graphic LCD on the front panel gives the technician the unit’s status without opening any software. The USB and serial ports connect the unit to a server or workstation, and the USB cable ships in the box, so the shutdown sequence can be driven from the host. SmartConnect adds remote status monitoring of the unit, which helps when the rack sits in a branch with no IT staff on site.

Saudi sites where 600 W in 2U fits

The 2U chassis matters most where rack space is already committed. Typical placements include the communications rack of a retail branch carrying the network switch, the POS server and the router; a compound guardhouse rack holding the NVR and the access control controllers; a clinic or school data closet with a small file server; and a site office on a construction project where the supply is less stable and AVR earns its place. In each case the deciding check is the same: total the nameplate draw of everything plugged in and keep it within 600 W, leaving margin for devices added later.

SMC1000I-2UC against its closest siblings

Three models in this family are easy to confuse. SMC1000IC carries the same 600 W rating in a tower chassis with more C13 outlets, which suits a desk-side or floor installation where there is no rack to mount into. SMC1500I-2UC keeps the rack format and steps up to 900 W, so it is the model to move to when the rack load approaches the limit of SMC1000I-2UC. Further up the range, SMC2000I is rated at 1300 W. For a rack whose load sits comfortably below 600 W, paying for the 900 W of SMC1500I-2UC buys headroom the rack may never use; for a rack already close to that ceiling, SMC1000I-2UC is the wrong place to save.

Installation and setup notes

The box contains rack-mounting brackets, an installation guide, a documentation CD and a USB cable, alongside the internal lead-acid battery. Mount battery-carrying units near the bottom of the rack to keep the cabinet’s centre of gravity low. Check that the equipment’s power cords end in C14 plugs to match the 4 IEC C13 outlets, or budget for adapter cords. Feed the unit from a 230 V circuit, connect the USB cable to the host that will run the shutdown, and use the serial port where an existing management system expects it. Finally, label each outlet with the device it feeds, so that a later addition does not quietly push the load past 600 W.

Package Contents

  • Documentation CD
  • Installation guide
  • Rack-mounting brackets
  • USB cable
  • Internal lead-acid battery

Technical Specifications

Brand
APC
Battery Details
lead-acid
Display
graphic LCD
Model
SMC1000I-2UC
Mounting
rackmount 2U
Power
600 W
Ups Power
1000 VA

Frequently Asked Questions

What load can APC SMC1000I-2UC support?

It is rated at 1000 VA and 600 W. Keep the combined draw of the connected equipment within 600 W.

How many outlets does it have?

It has 4 IEC C13 outlets, so the connected devices need power cords that end in C14 plugs.

How is it connected for monitoring?

Through USB or serial communication, and a USB cable is included in the box. The unit also supports SmartConnect.

What is the difference between SMC1000I-2UC and SMC1000IC?

SMC1000I-2UC and SMC1000IC are both rated at 600 W. SMC1000I-2UC is a 2U rackmount unit with rack-mounting brackets in the box, while SMC1000IC is a tower unit with more outlets.

Brand
APC

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

APC

APC SRV10KRIRK Online Rack UPS 10 kVA

Model SRV10KRIRK
LCDRackmount 4U10kW
Original price was: 13,465.69 SAR.Current price is: 12,657.75 SAR. excl. VAT Save 807.94 SAR

On backorder

Request a Quote
APC

APC SMX3000HVNC 3kVA Smart-UPS with Network Card

Model SMX3000HVNC
4U rack3kVA2700W
Original price was: 8,784.86 SAR.Current price is: 8,257.77 SAR. excl. VAT Save 527.09 SAR

On backorder

Request a Quote
APC

APC SRV15KRILRK Online Rack UPS 15 kVA

Model SRV15KRILRK
LCDRackmount15 kVA
Original price was: 25,045.74 SAR.Current price is: 23,543.00 SAR. excl. VAT Save 1,502.74 SAR

On backorder

Request a Quote
APC

APC SRVL2KRILRK Lithium-ion UPS 2000 VA

Model SRVL2KRILRK
Lithium-ionRack2000 VA
Original price was: 8,673.94 SAR.Current price is: 8,153.50 SAR. excl. VAT Save 520.44 SAR

On backorder

Request a Quote

Original price was: 1,925.57 SAR.Current price is: 1,810.04 SAR. excl. VAT