APC SRT3000RMXLI-NC Smart-UPS 3 kVA 2U Rackmount
A 3 kVA / 2.7 kW Smart-UPS that fits in 2U of rack height, shipped with its rail kit, rack-mount brackets, temperature sensor probe and USB cable.
Original price was: 11,092.00 SAR.10,426.48 SARCurrent price is: 10,426.48 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC SRT3000RMXLI-NC is a Smart-UPS uninterruptible power supply built to occupy 2U of rack height, rated at 3 kVA and 2.7 kW. Within the APC Smart-UPS family it holds the balanced middle ground: enough capacity for a full network or server rack in a typical branch or equipment room, without stepping up to the larger multi-kilowatt units at the top of the range. Its rackmount body is what drives the decision. The unit lives inside the same cabinet as the switches, recorders and servers it protects, so it takes no floor space, and the box carries the rail kit, the bracket pair and the screws needed to mount it on installation day. For a facilities or IT manager in Saudi Arabia, the questions left are how much load the rack draws and how much rack height is still free.
Sizing a rack around APC SRT3000RMXLI-NC
A UPS carries two ratings, and both apply. The 2.7 kW figure is the ceiling for the real power your connected equipment draws; the 3 kVA figure is the ceiling for apparent power. Add up the nameplate figures of every device in the rack, keep the total comfortably below 2.7 kW, and leave headroom for the switch or camera recorder that will be added next year. When the supply drops, the unit keeps that load running so the equipment rides through the interruption or shuts down in an orderly sequence instead of losing power mid-write.
Monitoring and control straight from the box
The package goes beyond mounting hardware. The USB cable and the PCBE software CD let a host server read the UPS status and run a controlled shutdown. The temperature sensor probe reports conditions inside the cabinet, which matters in Saudi equipment rooms where a cooling fault in summer is a routine operating risk. The EPO terminal block lets the electrician tie the unit into the building’s emergency power-off circuit, while the serial configuration cable and the Network Management Utility CD support setup and management.
Where it fits
Typical placements are the core rack of a corporate office, the security room of a residential compound where NVRs and access control panels share one cabinet, the communications rack of a hospital or clinic, and bank or retail branches running network and point-of-sale equipment. What these sites share is limited cabinet space and no spare floor for a standalone unit.
Choosing against its siblings
SRT3000XLI carries the same 2.7 kW rating in a tower body for sites without a rack. SRT2200RMXLI is the lighter option at 1980 W for smaller loads. SRT5KXLI steps up in capacity for rooms expecting heavier growth. When the capacity is right and the destination is a cabinet, SRT3000RMXLI-NC puts that capacity into 2U of rack height.
Deployment notes
Reserve 2U in the cabinet, preferably low in the rack so the weight stays near the base, and fit the rails from the rail kit before sliding the unit in. The rack-mount bracket pair and flat head screws secure the front, the ornamental screws finish the rails, and the front bezel goes on last. Route the USB or serial link to the host that will manage shutdowns, place the temperature probe where it reads the cooling air that actually reaches the equipment, and complete the EPO wiring before the unit is energised.
Package Contents
- Front bezel
- USB cable
- EPO Terminal block
- User Documentation CD
- PCBE Software CD
- RJ45 to DB9 cable
- Temperature sensor probe
- Serial configuration cable
- Network Management Utility CD
- Rail kit with instructions and hardware
- Rack-mount bracket pair
- Flat head screws for rack-mount brackets × 6
- Ornamental screws for rails × 4
Technical Specifications
- Brand
- APC
- Model
- SRT3000RMXLI-NC
- Mounting
- Rackmount 2U
- Power
- 2.7 kW
- Ups Power
- 3 kVA
Frequently Asked Questions
How much rack space does APC SRT3000RMXLI-NC need?
It is a 2U rackmount unit. The rail kit, the rack-mount bracket pair and the screws for both ship in the box.
What load can it carry?
It is rated at 3 kVA and 2.7 kW. Keep the combined real power of the connected equipment below 2.7 kW, with headroom for future additions.
Can it manage a controlled shutdown of a server?
The box includes a USB cable and the PCBE software CD for linking the unit to a host server that receives its status and handles shutdowns.
How does it differ from SRT3000XLI?
SRT3000XLI shares the 2.7 kW rating but is a tower unit for floor placement, while SRT3000RMXLI-NC mounts in a rack cabinet.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRV1KI Online Tower UPS 1000 VA
On backorder
APC BVX2200LI Tower UPS 2200 VA
On backorder
APC SCL500RMI1UC Lithium-Ion 400W 1U Rackmount UPS
On backorder
APC SMX3000RMHV2U 3 kVA Smart-UPS, Rack/Tower Convertible
On backorder





Reviews
There are no reviews yet.