APC AP8704S-WW Locking C13 to C14 Power Cord Kit, 1.2 m
A kit of 6 locking IEC C13 to C14 power cords, each 1.2 m long and rated for a 10 A input. The mid-length choice in APC’s cord range for racks where the PDU does not sit right beside the equipment.
Original price was: 459.21 SAR.431.66 SARCurrent price is: 431.66 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC AP8704S-WW is a kit of 6 locking power cords, each 1.2 m long, running from an IEC C14 plug to an IEC C13 connector. It is the middle-length option in APC’s cord-kit range, and that is its whole argument: long enough to reach equipment several units away from the PDU, or to cross from a strip on one side of the cabinet to a device on the other, yet short enough that surplus cable does not pile up behind the servers. Each cord is rated for a 10 A input through an IEC 60320 C14 connection, the inlet used across most servers, switches and storage shelves. The locking connector holds the lead in place when someone works at the rear of the cabinet. For a buyer standardising one cord length across racks with different layouts, it balances reach against tidiness and cost, and it takes no rack space.
Why APC AP8704S-WW suits mixed rack layouts
Rack equipment rarely sits right next to the outlet that feeds it. A vertical PDU on one side of the cabinet powers devices whose inlets may be on the opposite side of their chassis, and a horizontal PDU at the bottom of the rack powers gear mounted much higher up. A 1.2 m cord covers both cases without being pulled taut across the rear of the equipment, which strains the connectors, and without leaving loops of loose cable that block hot air leaving the servers.
The C14 end plugs into a C13 outlet on the PDU, and the C13 end goes into the C14 inlet on the device. Because the lock keeps both ends seated, a cord brushed by a technician’s arm or tugged while a neighbouring lead is re-routed stays connected. That matters most in cabinets holding single-supply switches or storage nodes, where one dropped cord takes the whole device down.
Saudi sites that standardise on one cord length
Systems integrators fitting out server rooms for government entities, banks and hospitals in Riyadh, Jeddah and Dammam often specify a single cord length for the whole project to simplify procurement and spares. At 1.2 m, the AP8704S-WW fills that role in cabinets that combine rack servers, top-of-rack switches and recorders. Security control rooms that keep NVRs and video-management servers in a shared rack benefit from the lock, since recording should never stop because a cord worked loose during unrelated work. Telecom sites and industrial plants, where contractors are in and out of equipment rooms, gain the same protection.
Choosing between AP8704S-WW and its siblings
Within the APC cord kits, the AP8702S-WW uses the same locking design with shorter leads, suited to equipment mounted directly beside the PDU. The AP8706S-WW keeps the 10 A rating with longer leads for cabinets where the PDU and the equipment sit far apart. The AP8712R moves to a larger, higher-current connector for heavy-draw equipment. Pick the AP8704S-WW when your runs fall between the short and long kits, or when one length has to serve several cabinet designs.
Deployment notes
Before ordering, count the C14 inlets on the equipment to be fed and confirm that the PDU outlets are C13. The kit holds 6 cords, so a cabinet with more devices, or with dual-supply servers, may need more than one kit. Keep the 10 A rating in mind: it covers the usual loads these connectors carry on servers and network gear. The kit is a cabling accessory, not rack-mountable hardware, and APC covers it with a 24-month warranty.
Package Contents
- Locking IEC power cord (C13 to C14, 1.2 m) × 6
Technical Specifications
- Brand
- APC
- Warranty
- 2 Years
- Model
- AP8704S-WW
- Mounting
- Not rack-mountable
- Power
- Input 10 A, IEC 60320 C14 connection
Frequently Asked Questions
How long are the cords in the APC AP8704S-WW?
Each cord in the kit is 1.2 m long.
How many cords come in the kit?
The kit contains 6 locking power cords.
Which connectors do the cords use?
A locking IEC C13 connector on one end and a C14 plug on the other, with the input rated at 10 A through an IEC 60320 C14 connection.
Does the kit mount in the rack?
No. It is a cord kit that is not rack-mountable and takes no rack units.
What warranty applies?
The kit carries a 24-month warranty.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRVL2KRILRK Lithium-ion UPS 2000 VA
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder
APC SRV10KRIL Online UPS Extended Runtime
On backorder
APC SRV10KRI Online UPS 4U Rackmount
On backorder





Reviews
There are no reviews yet.