APC PDM3516IEC-380 Power Distribution Module
Power distribution module with a 380 cm output cable, a 16 A IEC 309 outlet and a three-pole circuit breaker. Includes circuit monitoring for the distribution circuit.
Original price was: 2,755.44 SAR.2,590.11 SARCurrent price is: 2,590.11 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC PDM3516IEC-380 is a power distribution module for projects where the output cable route can be served by a 380 cm cable. Its practical distinction is the reach available between the distribution position and the intended connection point. Start with that route when selecting the module: a suitable cable length helps the installation team plan an orderly connection without choosing extra length merely because it is available. For a facilities buyer arranging a defined distribution circuit, this model brings together an IEC 309 outlet, a three-pole circuit breaker and circuit monitoring. It suits a specification-led purchase in which the electrical arrangement and the physical cable path are assessed together before the order is placed.
APC PDM3516IEC-380 and the cable route
The output cable is 380 cm long. Measure the intended installed path, including changes of direction and the approach to the connection point, rather than relying on the straight distance between equipment. This makes the model a candidate for a relatively local connection within a planned distribution layout. Leave room for sensible cable management and maintenance access when assessing the path. A route that only just reaches on a drawing deserves another look on site, because obstacles and the final equipment positions can change how the cable needs to run.
Electrical fit before installation
The module has a 400 V three-phase input and a frequency rating of 50 Hz. Maximum line current and maximum current draw are both 16 A. These ratings give the electrical team concrete checks for the proposed supply and connected load. Select the module against the actual circuit design, and keep the load assessment separate from cable reach: a cable that reaches the destination does not by itself establish electrical suitability. Have the responsible installer check the intended supply arrangement before the module becomes part of the site’s distribution installation.
Outlet, protection and monitoring
A single IEC 309 16 A outlet defines the connection at the output. Compare that connector requirement with the intended receiving equipment before procurement so that the installation can proceed with the correct interface. The module also incorporates one three-pole circuit breaker and circuit monitoring. Include both features in the operating team’s circuit review and handover plan. Identify which load the circuit serves and how it will be referenced during maintenance; clear identification helps staff associate this distribution point with the equipment connected downstream.
Use in Saudi facilities projects
For a Saudi commercial building, a logistics facility or an operations site, assess this module as part of the electrical distribution design serving the equipment area. The useful starting point is a defined destination and a measured route, followed by the supply, current and connector checks. In a refurbishment, confirm the final equipment position before ordering the cable variant. In a new installation, agree the route with the team responsible for nearby services so that cable planning and maintenance access are considered while the layout is still being settled.
Choosing within the PDM3516IEC family
PDM3516IEC-380, PDM3516IEC-800 and PDM3516IEC-860 are separate purchasing references, so retain the complete model designation throughout quotation and ordering. Select PDM3516IEC-380 when its own cable reach fits the route you have measured. If the equipment position changes, reassess the cable requirement before accepting a different family member. This keeps the choice tied to the installation instead of treating similar model names as interchangeable. It also gives the purchasing team a clear reason for retaining this exact variant in the project schedule.
Preparation and handover
The grey module carries a warranty of 12 months. Use its installation guide when preparing the work, and retain the model reference with the circuit documentation for future service planning. Before handover, reconcile the installed route, the outlet connection and the load allocation with the approved design. Those checks give the operations team a useful picture of where the module belongs in the distribution arrangement and help procurement identify the same cable variant when a matching requirement arises elsewhere on the site.
Package Contents
- Power distribution module
- Installation guide
Technical Specifications
- Brand
- APC
- Warranty
- 1 Year
- Model
- PDM3516IEC-380
Frequently Asked Questions
How long is the output cable?
The PDM3516IEC-380 output cable is 380 cm long.
What supply rating should the installer check?
Check the 400 V three-phase input, 50 Hz frequency and 16 A maximum line current against the circuit design.
What outlet and circuit features does it have?
It has one IEC 309 16 A outlet, one three-pole circuit breaker and circuit monitoring.
What is the warranty period?
The warranty period is 12 months.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC APDU9941 Switched Rack PDU 30A, 200V/208V
On backorder
APC AP7921B Switched Rack PDU, 16 A, 1U, 8 C13 Outlets
On backorder
APC AP7820B Metered Rack PDU, 1U, 8 x C13 Outlets
On backorder
APC EPDU1116S Switched Rack PDU 16A, 20 C13 and 4 C19
On backorder





Reviews
There are no reviews yet.