ZKTeco ZK-QR600-V-E QR and EM-Marine RFID Reader
An access reader for QR codes and EM-Marine RFID cards. Consider it for entrances where the identification workflow uses both card presentation and QR codes.
445.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco QR600-V-E combines QR code reading with EM-Marine RFID card reading for an entrance using those identification methods. Start the selection with the credentials people already use at the site and the process planned for arriving visitors. If employees carry EM-Marine cards and the visitor procedure uses QR codes, this reader is a candidate for that shared presentation point. For a Saudi administrative building or business reception, define what each user presents and how that identification enters the access workflow. Then test the reader in the proposed system arrangement so the purchasing decision follows the actual entrance routine, from presenting a credential to the system handling it.
ZKTeco QR600-V-E credential planning
The supported identification methods are EM-Marine RFID cards and QR codes. Include samples of the site’s working cards when evaluating a card based entrance. For a code based arrival procedure, use the codes produced by the intended credential process in the operating trial. Follow each identification method through the entrance workflow and confirm that its use matches the permissions and procedures established for the site.
Compare by the entrance routine
ProID30WE centres on card reading, while QR600-V-E brings EM-Marine card and QR code reading together. QR600-HK supports password entry alongside QR codes and RFID cards. Decide whether users need to present a card or code, or whether the planned procedure also calls for a password, before choosing between these models.
Trial the presentation point
Consider this model for a business entrance serving EM-Marine card holders and QR code users. Observe how people approach and present their credentials during the installation trial. Involve reception or security staff in reviewing the operating steps, then document the card and code procedure at handover so the reading point fits the site’s daily arrival process.
Plan the 12 V supply at the doorway
The reader uses a 12 V power supply, making electrical provision part of the entrance plan. Identify the 12 V supply location and cable route with the installation team before fixing the presentation point. In an existing office building, coordinate this work with the people responsible for electrical services and access control. Check the reader’s supply during commissioning alongside credential presentation. For a project covering several entrances, review the supply arrangement at each doorway rather than assuming the same installation layout suits every location.
Choose the connection for the access system
Connection options include Wiegand, RS485 and OSDP. Select Wiegand, RS485 or OSDP according to the proposed access system interface, then agree the connection arrangement with the installer. This puts the interface choice beside credential type in the purchasing decision. During commissioning, follow card and QR readings through the selected connection into the access workflow. Use the arrangement intended for daily operation so the trial covers the actual reader installation. Reception procedures and staff permissions should be reviewed with that working entrance arrangement before handover.
Place credentials within reading distance
The QR reading distance is 5 cm and the RFID reading distance is 4 cm. These are practical considerations when choosing where people stand and where the reader is mounted. Trial EM-Marine RFID cards and QR codes from the intended approach position, ensuring users can comfortably bring the credential to the reading point. At a visitor reception entrance, include the presentation step in arrival instructions. Observe whether users understand where to hold the card or QR code, and adjust the entrance procedure around the physical reading position.
Assess the housing and installation position
A metal housing and IP65 protection rating are part of this reader’s construction. Include them when reviewing the proposed location with the team responsible for entrance installation. Evaluate the position together with wiring access, the power arrangement and credential presentation. For a Saudi site combining offices, a warehouse entrance and a reception area, assess each doorway separately. Shared staff credentials do not necessarily mean identical installation conditions or arrival routines, so choose the presentation point around the people using that particular entrance.
Prepare a usable handover procedure
Bring reception and security staff into the operating trial so they can explain card and QR presentation consistently. Test an EM-Marine card through the intended staff entry procedure, then test a QR code through the planned visitor arrival process. Observe the approach, presentation and subsequent access steps. At handover, document the selected interface, supply location and daily credential routine for the entrance team. That gives the facilities manager concrete installation details to review when reception arrangements change or the presentation point needs to move.
Technical Specifications
- Brand
- ZKTeco
- IP Rating
- IP65
- Authentication Method
- EM-Marine RFID card and QR code
- Connectivity
- Wiegand / RS485 / OSDP
- Device Type
- QR and RFID card reader
- Model
- ZK-QR600-V-E
- Power
- 12 V
Frequently Asked Questions
Which identification methods does it support?
It supports QR codes and EM-Marine RFID cards.
Which cards should be included in the installation trial?
Use samples of the EM-Marine RFID cards that the site intends to use with the access system.
Which entrance workflow should prompt consideration of this model?
Consider it when the planned identification routine uses EM-Marine RFID cards and QR codes.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco F22 Fingerprint Attendance and Access Terminal
On backorder
ZKTeco ZK-SpeedFace-M4 Face Access Control Terminal
On backorder
ZKTeco ZK-inPulse Finger Vein Access Control Terminal
On backorder
ZKTeco F18 Fingerprint Access Control Reader
On backorder





Reviews
There are no reviews yet.