ZKTeco QR600-VK QR/RFID Reader with Keypad
QR and RFID access reader with a keypad for password entry. Wiegand and RS485 interfaces, IP65 protection and DC 12 V ±5% power suit planned access-control installations.
495.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco QR600-VK for mixed access credentials
ZKTeco QR600-VK combines QR reading, RFID card reading and a keypad for password entry at the access point. Its DC 12 V ±5% supply requirement gives the installation team a clear electrical requirement when planning the reader connection. For a Saudi facilities manager, the practical attraction is the choice of credential methods at the same reader position: a site can consider code presentation, card presentation or password entry within its wider access design. Wiegand and RS485 interfaces provide the connection options to assess against that design. Choose this model when the project calls for a reader that brings these presentation methods together, with IP65 protection forming part of the environmental assessment.
Match credentials to the entrance workflow
Different entrances can involve different groups of users. An office reception may need to accommodate personnel carrying cards alongside users presenting codes. A service entrance may call for keypad entry within an approved password workflow. The QR600-VK gives the project team these reading and input methods in a single device. Decide which methods the access system will actually use before installation, then make the instructions at the entrance match that choice. This avoids asking users to follow a card-only procedure when the intended workflow uses another supported credential.
RFID support covers 125 kHz ID cards and 13.56 MHz IC cards. Review the credential technology already issued across the site when selecting the reader. Frequency support is a useful starting point for this review; it should be considered alongside the requirements of the access system and the actual cards to be presented. At a mixed-use commercial property, that discussion belongs early in the project, before the team settles the everyday entry procedure.
Check the code format before deployment
The supported formats include QR code, Data Matrix, PDF417, GS1 Databar, Code 128/EAN128, UPC/EAN, Codabar and Code 39/93. This range matters when a facility already uses a particular code format in its operational process. Select the format needed for access and include a representative sample in commissioning. Reading a code and deciding whether its holder may enter are separate steps in the access workflow, so the project should align both before the entrance goes into service.
The stated QR reading distance is at least 5 cm, while the RFID reading distance is at least 4 cm. Consider how people will stand and present their credential at the planned reader position. Clear presentation space matters at a reception desk, a corridor entrance or a service access point. Include code presentation, card presentation and keypad use in the acceptance walkthrough wherever those methods form part of the planned operation.
Connection and environmental planning
Wiegand and RS485 are the interfaces to review with the installer when matching the QR600-VK to the project. Confirm the selected connection and the DC 12 V ±5% supply before cabling is finalized. The IP65 rating also belongs in the location assessment. Evaluate the actual mounting position and exposure at the building rather than treating the entrance label alone as a placement decision. This is particularly relevant when comparing an internal office doorway with a service entrance at a warehouse or commercial facility.
Position within the access-reader family
The QR600-VK is a QR/RFID reader with password input, whereas the SCR100 is a standalone IP-based access-control terminal using EM proximity cards. The SLK20R serves another role as a USB fingerprint scanner. These distinctions help purchasing teams assign each device to the correct part of a project: credential presentation at the entrance, standalone card access, or fingerprint capture at a computer. Select the QR600-VK for its combination of code reading, card reading and keypad input, then coordinate its interfaces and power requirement with the wider access installation.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- QR code, RFID, password
- Connectivity
- Wiegand, RS485
- Device Type
- QR/RFID reader with keypad
- Model
- QR600-VK
- Power
- DC 12 V ±5%
Frequently Asked Questions
Which credentials does the reader accept?
It supports QR codes, RFID cards and passwords entered through its keypad.
Which RFID card frequencies are supported?
The reader supports 125 kHz ID cards and 13.56 MHz IC cards.
How does it connect and receive power?
It provides Wiegand and RS485 interfaces and requires DC 12 V ±5% power.
What protection rating does it have?
The reader has an IP65 ingress-protection rating.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-7500 USB Fingerprint Scanner
On backorder
ZKTeco ZK-8500 USB Fingerprint and Card Enrollment Reader
On backorder
ZKTeco FR1300 Indoor Slave Access Reader
On backorder
ZKTeco SenseFace 2A WiFi Biometric Access Control Terminal
On backorder





Reviews
There are no reviews yet.