ZKTeco ZK-KR102E Proximity Card Reader IP65
A 125 kHz proximity card reader for indoor and outdoor access points, with IP65 protection and default Wiegand 26/34-bit connectivity. External LED and buzzer control lets the access system manage user feedback.
80.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco KR102E suits a straightforward access project built around proximity cards, with the same reader type serving indoor and outdoor entrances. It reads E-series proximity cards at 125 kHz and connects through default Wiegand 26/34-bit output. For a facilities manager choosing readers for staff entrances, office corridors or service doors, the useful combination is card presentation, environmental protection and externally controlled feedback. Its IP65 rating, epoxy potting and reverse-polarity protection make protection part of the selection alongside credential and controller matching. Choose it around the cards used at the site and the interface accepted by the access controller, then plan the reader position and user indications together.
ZKTeco KR102E at the entrance
The reader detects a supported proximity card at a distance of up to 10 cm. Positioning should encourage staff to present their card deliberately near the reader. Treat that distance as an upper limit when planning the approach to a door, and test the actual credentials at the installed position. A reader placed where users naturally reach for it helps make the entry process understandable, particularly at a shared entrance where staff arrive from different directions.
External LED and buzzer control gives the access system a way to manage visible and audible indications at the reader. During commissioning, the installer should check those control connections alongside credential output. The practical goal is for the indication a user sees or hears to agree with the access event the system is handling. Include both accepted and rejected credential presentations in the handover demonstration so the facilities team understands the configured response.
Matching the card and controller
Default Wiegand 26/34-bit connectivity makes the controller interface a central purchasing check. Confirm that the selected controller accepts the intended output format and that the credentials used for the project can be handled consistently. Reading a card at the door and granting access through the wider system are connected parts of the installation; review them together before ordering readers for additional entrances.
The authentication method is E-series proximity card operation. For a replacement project, test the site’s actual cards against this reader rather than selecting a unit solely because it resembles the existing hardware. For a new project, settle the choice of E-series 125 kHz proximity cards before rolling out credentials to employees. Those checks keep the reader purchase tied to the access workflow the security team intends to operate.
Indoor and outdoor site planning
Indoor/outdoor use and IP65 protection support consideration for both internal access points and exterior approaches. In a Saudi office building, that could mean comparing a staff entrance with an internal controlled corridor. At a warehouse or service facility, it could mean evaluating an access point used by operational staff. Select the installation position around the actual exposure and the user’s approach, then review the rest of the door installation with the contractor.
Epoxy potting is part of the reader’s protective construction, while reverse-polarity protection addresses an electrical connection risk. When reviewing an IP65 reader installation across several entrances, include the epoxy-potted construction and reverse-polarity protection in the contractor discussion. Keep wiring identification and connection checks in the commissioning process, and assess the reader housing separately from the surrounding cable connections and other door equipment.
Position within the reader family
The KR500H-HID sibling carries IP67 protection, whereas the KR102E carries IP65. If environmental protection drives the choice, compare those named models before standardising the site. Their protection ratings should be considered alongside credential and controller requirements; a higher enclosure rating alone does not settle whether a reader belongs in the planned access system.
For the KR102E, the purchasing case centres on E-series proximity cards, default Wiegand output and externally controlled LED and buzzer feedback. Ask the installer to demonstrate card reading, controller receipt and configured indications at the chosen door. That practical acceptance check connects the reader’s functions to the daily work of staff, security personnel and the facilities team.
Technical Specifications
- Brand
- ZKTeco
- IP Rating
- IP65
- Authentication Method
- 125kHz proximity card (E series)
- Connectivity
- Wiegand 26/34-bit default
- Device Type
- Proximity card reader
- Model
- ZK-KR102E
Frequently Asked Questions
Which cards does the KR102E read?
It reads E-series 125 kHz proximity cards.
What connection does it use?
The default interface is Wiegand 26/34-bit.
Can it be considered for outdoor entrances?
It supports indoor/outdoor use and has an IP65 rating, with epoxy potting.
What is the reading distance?
The reading range is up to 10 cm. Test the actual site cards at the planned installation position.
Can the access system control the indicators?
External LED and buzzer control is supported.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-QR600-V-E QR and EM-Marine RFID Reader
On backorder
ZKTeco ZK-inPulse Finger Vein Access Control Terminal
On backorder
ZKTeco SF300 Fingerprint Access Control Terminal
On backorder
ZKTeco ZK-InBio460Pro Four-Door Biometric Access Panel
On backorder





Reviews
There are no reviews yet.