ZKTeco 131 N0 Electric Strike – Recessed
Recessed electric strike for metallic doors, with 400 kg holding force and power-to-release operation. Uses 12V DC ±15% with a current rating of 240 mA.
95.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco AL-131NO is a recessed electric strike for metallic doors where the access design calls for release when electrical power is applied. Its supply requirement is 12V DC ±15%, with a current rating of 240 mA, so the electrical arrangement deserves attention alongside the door hardware. For a facilities manager choosing an electrically controlled door component, the key decision is whether this power-to-release action matches the intended access sequence. The recessed installation also makes the door preparation part of the purchasing decision. Select this model when the project needs an electric strike at a metal door and the installer can provide a matching mechanical fit and suitable DC supply.
ZKTeco AL-131NO in daily operation
The operating description is NO, with release by connecting power. Use that behavior when discussing the door sequence with the access-control installer: the electrical command must supply power to release the strike. A practical handover should demonstrate the actual powered release at the installed door, followed by a check that the door closes and engages correctly. This gives the operations team a useful acceptance check tied to the component they are buying.
Holding force is 400 kg. Consider that figure together with the condition of the door and its mounting preparation when assessing the installation. A holding-force rating is a reason to examine the complete mechanical assembly carefully; correct alignment and secure attachment remain part of the installer’s work. For a replacement project, inspect the existing strike location before ordering so the proposed recessed installation can be assessed against the door on site.
Where a recessed strike fits
Saudi office facilities, administrative areas and commercial back-of-house spaces can consider this strike for metallic doors requiring electrically controlled release. The relevant starting point is the door construction and intended operating sequence. Ask the site team to identify the door receiving the strike and explain how staff should pass through it. That discussion helps establish whether a recessed electric strike belongs in the door design before selecting the surrounding control equipment.
The door-opening angle is 90°. Include the opening movement in the installation review, together with the space needed around the door and the position of the latch. Recessed mounting calls for attention to the mounting location rather than choosing solely by appearance. Bring the installer into the selection while the physical preparation can still be reviewed, particularly when existing metalwork must be retained.
Position within the lock family
For procurement, distinguish this electric strike from the separately listed ZK-180L and ZK-180U mounting accessories. Base the selection on the component’s role in the door assembly, then use the exact model identity on the purchase schedule. This keeps a request for an electrically operated strike distinct from a request for installation hardware and gives the fitting team a clear item to inspect before work begins.
Electrical planning and installation review
Match the supply to 12V DC ±15% and account for the strike’s 240 mA current rating when planning its circuit. Coordinate electrical preparation with the recessed mechanical installation so the release can be tested at the finished door. Before accepting the installation, have the team demonstrate powered release, inspect latch engagement and review the door movement. These checks connect the electrical operating principle with the physical fit that determines whether this strike suits the intended entrance.
Technical Specifications
- Brand
- ZKTeco
- Device Type
- Electric strike
- Model
- 131 N0
- Mounting
- Recessed installation
- Power
- 12V DC ±15%
Frequently Asked Questions
How does the strike release?
Its operating description is NO; applying electrical power releases the strike.
What supply does it require?
It requires 12V DC ±15% and has a current rating of 240 mA.
What door and mounting arrangement suit it?
It is intended for metallic doors with recessed installation and a 90° door-opening angle.
What is its holding force?
The holding-force rating is 400 kg.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco 350U U-Shaped Magnetic Lock Mounting Bracket
On backorder
ZKTeco LMB-180U U Bracket for LM-1802 Magnetic Lock
On backorder
ZKTeco 350ZL ZL Magnetic Lock Mounting Bracket
On backorder
ZKTeco 350L Magnetic Lock Mounting Bracket, L-Shaped
On backorder





Reviews
There are no reviews yet.