ZKTeco ZK-D147-H Encoder USB Hotel Card Encoder
USB hotel IC card encoder for ISO / IEC14443 A smart cards at 13.56MHz. Its internal antenna, close reading range and wired USB data connection suit a reception card-issuing position.
125.26 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco D147-H Encoder is a USB hotel IC card encoder for the card-handling side of a hotel access installation. Its role belongs at the reception workstation, where staff prepare smart cards, rather than in the door hardware schedule. The unit uses DC 5V (±4%) power and a USB data output, giving the project team concrete electrical and connection requirements to check before allocating a workstation. For a Saudi hotel, serviced accommodation operator or hospitality procurement team, the key buying decision is whether its supported card technologies match the intended card estate. Start with that match, then plan the desk position around the short reading distance and the wired connection.
ZKTeco D147-H Encoder and card selection
The encoder works with ISO / IEC14443 A smart cards at 13.56MHz. Its supported card list includes S50, S70, DESfire, NTAG213, NTAG216, Ultralight, FM1204 and FM1208. These names give the purchasing team a practical basis for identifying cards to evaluate. Specify the intended card family explicitly when requesting a project quotation, instead of describing the requirement only as a hotel card. That makes the card choice visible to reception, the access-system supplier and the person responsible for replenishing card stock. Keep the selected card identity consistent throughout procurement and commissioning.
Close-range handling at the desk
An internal antenna and a reading range of 0-3cm make card presentation a close-range action. Allocate a reachable spot where staff can bring the card to the encoder without reaching behind the monitor or moving other desk equipment. The short distance matters when laying out a busy reception counter: the working area should let the operator deliberately present the intended card. During workstation trials, use the actual card selected for the hotel and check the physical presentation position. This is a more useful acceptance exercise than judging the encoder only by whether it fits beside the computer.
The data transmission time is under 90ms. Treat that figure as a device transmission characteristic when considering the card-handling stage. Plan a reception trial around the complete staff task, including selecting the intended card and presenting it correctly. A fast individual transmission still belongs within a wider operating procedure, so the desk layout and staff instructions deserve attention alongside the electrical connection. This approach helps the hotel evaluate the practical workstation arrangement without turning a transmission figure into a promise about the duration of a complete guest transaction.
Wired connection and workstation planning
USB is the data output, and the wire length is 1500mm. Check the route between the encoder position and the workstation connection before fixing the counter layout. Account for the path the wire actually follows around desk furniture, rather than only the straight-line distance across the worktop. The specified supply is DC 5V (±4%); include that requirement in the workstation installation brief. Keeping the power requirement and data connection visible in the same brief gives the installer a clear starting point when preparing a reception position or moving it to another desk.
Its place in a hotel-lock project
When reviewing a project that also lists LH1000 or LH3000, place the D147-H Encoder under reception card equipment in the purchasing schedule. This separates the desk-side card task from decisions about individual guest-room doors. Compare requirements by location and purpose: staff need an accessible encoding position, while the door installation needs its own hardware assessment. For a new Saudi hospitality property, make this distinction before dividing the equipment order between reception and facilities teams. For a refurbishment, review the existing card stock and the planned workstation position together before assigning the encoder to the replacement schedule.
A focused commissioning handover
Use the handover to demonstrate the chosen card type, the close presentation position and the wired desk arrangement to the reception team. Record the card family in the property’s purchasing instructions so later orders follow the same selection. Facilities staff should also know where the encoder connects and how its wire is routed, particularly when reception furniture changes. These practical decisions follow directly from the unit’s smart-card support, short reading range and USB connection, and help turn a hardware purchase into a clearly assigned reception tool.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- ISO / IEC14443 A smart card
- Device Type
- USB hotel IC card encoder
- Model
- ZK-D147-H Encoder
- Power
- DC 5V (±4%)
Frequently Asked Questions
Which smart-card standard does it use?
It supports ISO / IEC14443 A smart cards at 13.56MHz.
Which card families are supported?
S50, S70, DESfire, NTAG213, NTAG216, Ultralight, FM1204 and FM1208.
How close should the card be?
The reading range is 0-3cm, using an internal antenna.
What are its connection and supply requirements?
It has USB data output, a 1500mm wire and a DC 5V (±4%) power requirement.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco CR60W Hotel Lock Card Encoder for Front Desks
On backorder
ZKTeco ZK-LH6000 RFID Hotel Lock in Zinc Alloy
On backorder
ZKTeco ZK-ZL400 Wireless Mifare Hotel Door Lock
On backorder
ZKTeco LH4000 Zinc Alloy RFID Hotel Lock
On backorder






Reviews
There are no reviews yet.