ZKTeco LH5000 AA Battery RFID Hotel Lock
RFID hotel room lock powered by 4 AA alkaline batteries and used with ZKBiolock Hotel Lock System. Supports S70 and S50 cards and doors 35–55 mm thick.
320.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The ZKTeco LH5000 uses 4 AA alkaline batteries, making the power arrangement a clear starting point for hotel maintenance planning. It combines RFID room access with ZKBiolock Hotel Lock System, so selecting the unit involves reception as well as facilities staff. For an operator assessing room hardware across a property, the specified battery type gives purchasing and maintenance a defined consumable to manage. Review how technicians will service the installed lock, agree responsibility for battery checks and test the intended room card on a completed door. This places the LH5000 purchasing decision around daily operation: credential preparation, the physical entrance and the maintenance process needed to keep the installation in service.
ZKTeco LH5000 battery planning
The required power source is 4 AA alkaline batteries. Include that type in the maintenance purchasing brief and establish a property procedure for checking and replacing batteries according to actual use. Facilities staff can coordinate inspections with planned room visits and the accommodation team’s occupancy arrangements. Keep the approved consumable accessible to the responsible technician and record completed maintenance against the room. During the installation trial, review the battery servicing procedure with the installer. That gives the team an opportunity to include the task in its training before the remaining rooms enter operation.
Choosing and ordering access cards
The lock uses ISO14443 Type-A authentication at 13.56 MHz, supporting S70 4KB and S50 1KB cards. These identifiers provide a specific basis for arranging guest credentials. Trial the proposed format at the prepared room before ordering cards for the property, and retain an approved sample for reception. Where several staff shifts use the room access process, a clear card reference makes the operating instructions easier to pass between teams. Agree a consistent description with the supplier so later card purchases follow the format tested on the installed locks.
Reception workflow and software
LH5000 works with ZKBiolock Hotel Lock System. Involve reception staff in the trial of card preparation and its use at the room entrance, then agree the property’s operating procedure before accepting the installation. The practical review should connect the staff member preparing guest access with the technician maintaining the lock. A serviced apartment operator or business hotel can set aside a prepared room for this training before bringing the remaining rooms into service. Assign responsibility for collecting staff feedback during the trial and retain the agreed procedure for new employees and reception shift handovers.
Door dimensions and mortise preparation
The supported door thickness is 35–55 mm, with an American standard mortise featuring 5 latches. Arrange an inspection of the door leaf and frame before committing to a replacement project. The installer should review thickness, mortise preparation and fixing positions, then trial the lock on the entrance selected to represent the installation. Include any required door adjustments in the contractor’s scope and complete them before testing room cards. Following that sequence gives the project manager an acceptance check based on the finished entrance, with access testing performed after the surrounding door and frame work.
Positioning within the lock family
When assessing LH5000 alongside LH3600 and LH4000, make the LH5000 alkaline AA battery servicing plan a separate item in its evaluation. Compare the intended room card, door preparation and reception procedure for each proposed model through a site-specific review. The LH5000 decision can start with the facilities team’s arrangements for managing batteries during planned maintenance. Then tie the quotation to the installation, trial and training scope agreed by the property. This gives purchasing a concrete requirement to compare with the implementation proposed for other models on the shortlist before placing the final order.
Operating conditions and handover
The operating temperature range is 0–45°C. For a Saudi hospitality project, assess conditions at the actual lock position, including warmer corridors close to building entrances. After installation, bring reception and maintenance together to test card use, door opening and closure, and review the battery maintenance procedure. Record the model, selected card format and accepted door arrangement alongside the property’s servicing instructions. That handover file gives staff a consistent reference when responsibilities change and connects later room additions to an installation the team has already tried. Accept the room after the operating process has been reviewed at the completed entrance.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- ISO14443 (RFID) Type-A card
- Device Type
- RFID hotel lock
- Model
- LH5000
- Power
- 4 x AA alkaline batteries
Frequently Asked Questions
Which batteries power the LH5000?
It uses 4 AA alkaline batteries.
Which access cards are supported?
It supports ISO14443 Type-A cards at 13.56 MHz, including S70 4KB and S50 1KB.
Which software works with this model?
It works with ZKBiolock Hotel Lock System.
What are the main door requirements?
The supported door thickness is 35–55 mm, with an American standard mortise featuring 5 latches. The actual door preparation should be checked before installation.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco LH6500 RFID Hotel Room Lock
On backorder
ZKTeco ZK-LH6000 RFID Hotel Lock in Zinc Alloy
On backorder
ZKTeco LH3600 RFID Hotel Lock, Silver
On backorder
ZKTeco ZK-ZL500 Wireless Hotel Lock with Phone Access
On backorder






Reviews
There are no reviews yet.