Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandZKTeco

ZKTeco ZK-ProID10WM Mifare RFID Card Reader

Mifare RFID reader with configurable Wiegand output and IP65 protection. Requires 7–13 V DC at 80 mA and provides external LED and buzzer controls.

IP RatingIP65Authentication MethodMifare cardConnectivityWiegand 26/34-bit configurableDevice TypeRFID card readerModelZK-ProID10WMPower7–13 V DC, 80 mA

74.24 SAR excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order40 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

The ZKTeco ProID10WM is a Mifare RFID card reader for access projects using a Wiegand connection to the controller. Its power requirement is 7–13 V DC at 80 mA, giving the installer a specific electrical load to include in the door design. Configurable output and external LED and buzzer controls let the reader fit into the controller’s credential and indication arrangements. For a Saudi facilities manager, the key purchasing question is whether the site’s cards and controller match that combination. It is a candidate for an added staff entrance or a replacement reader where Mifare credentials are part of the access plan and the wiring design calls for Wiegand.

ZKTeco ProID10WM credential handling

The reader operates with Mifare cards at 13.56 MHz. Its reading time is no more than 300 ms. That reading time concerns the credential capture stage; the complete door response also involves the access controller and locking arrangement. During commissioning, assess those stages separately. Present a working site card, confirm that the controller receives the credential, and then check the resulting door action. This provides a useful way to distinguish a card presentation problem from a permission or lock integration problem.

For an office building, the reader can be considered for staff access between reception and internal departments. A warehouse operator can assess it for a personnel entrance connected to the site’s access system. In either setting, the practical advantage is using a card presentation point that matches the chosen credential technology. Access permissions and departmental restrictions belong in the wider access design, so the reader should be selected alongside the controller and the cards that staff will actually carry.

Configuring the controller connection

Wiegand output can be configured for 26-bit or 34-bit operation. Match that selection to the controller’s expected format before repeating the installation across the building. When replacing an existing reader, test a real credential rather than relying on the connector or product family name as proof of a working match. Supported controllers include InBio Pro 160/260/460, providing a concrete controller family to consider when reviewing the access panel already installed at the site.

External LED and buzzer controls allow the visual and audible indications to be integrated with the system’s intended behaviour. Agree on that behaviour during commissioning and verify it at the door. A consistent indication policy helps reception and security staff explain card use to employees and authorised visitors. It also gives maintenance personnel a clearer starting point when a user reports that the reader sounds or lights differently from the other entrances.

Position within the reader family

ProID10WM shares an IP65 rating with ProID10WE and ProID20WE. Consequently, the protection rating alone does not settle the choice between those models. For this reader, the decision should centre on the Mifare credential requirement and configurable Wiegand connection. Include its 80 mA current requirement in the reader supply calculation, and account separately for the controller and other door hardware. Similar family names should not replace checking the electrical and credential requirements of the particular unit being ordered.

Preparing the entrance for handover

Before final installation, bring together the intended controller, a representative site card and a supply within the required voltage range. Review cable routing and terminations as part of the entrance design. IP65 protection is relevant to locating the reader, while the completed installation also needs suitable treatment of cable entries and connections. Consider the finished door assembly rather than treating the reader enclosure as the entire environmental protection plan.

At handover, test an authorised credential and a credential without access permission, then verify the indications alongside the actual door response. Record the selected Wiegand format with the controller configuration so that later service work can reproduce the setup. For a building with several departments, this record helps the maintenance team identify the settings to preserve when replacing a reader or extending the system to another staff entrance.

Technical Specifications

Brand
ZKTeco
IP Rating
IP65
Authentication Method
Mifare card
Connectivity
Wiegand 26/34-bit configurable
Device Type
RFID card reader
Model
ZK-ProID10WM
Power
7–13 V DC, 80 mA

Frequently Asked Questions

Which cards does it read?

It reads Mifare cards at 13.56 MHz.

What connection does it use?

It uses Wiegand with configurable 26-bit or 34-bit output.

What power supply is required?

The reader requires 7–13 V DC at 80 mA.

Which controllers are supported?

Supported controllers include InBio Pro 160/260/460.

Brand
ZKTeco

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

ZKTeco

ZKTeco ZK-InBio460Pro Four-Door Biometric Access Panel

Model ZK-INBIO460PRO
Fingerprint and card60TCP
1,870.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco ZK-SC503 RFID Standalone Access Control Terminal

Model ZK-SC503
ID card30TCP
345.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco FR1300 Indoor Slave Access Reader

Model ZK-FR1300
125 kHz EM cardRS485Indoor slave reader
345.00 SAR excl. VAT

On backorder

Request a Quote
ZKTeco

ZKTeco ZK-7500 USB Fingerprint Scanner

Model ZK-7500
FingerprintUSBUSB Fingerprint Scann...
152.53 SAR excl. VAT

On backorder

Request a Quote

74.24 SAR excl. VAT