APC SRV240RLBP-9A 240V 3U Rack UPS Battery Pack
A 3U rack-mount APC battery pack whose 20 lead-acid blocks form a 240 V, 2160VAh string behind a compatible UPS, with brackets, screws and battery cable in the box.
Original price was: 5,025.80 SAR.4,724.25 SARCurrent price is: 4,724.25 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC SRV240RLBP-9A is the high-voltage, rack-mount member of APC’s external battery range: a 3U pack holding 20 lead-acid blocks of 12 V, 9 Ah each, which together form a 240 V battery string rated at 2160VAh. That combination is what sets it apart from its siblings. Lower-voltage packs serve UPS units with a low-voltage battery input, while this one is built for UPS models whose battery input expects a full 240 V string, and it is sized to sit in the same rack as the UPS it extends. Rack-mount brackets, flat-head screws and a battery cable ship in the box, so the installer does not need to source mounting hardware separately. Before ordering, confirm two points: that your UPS documentation names a 240 V external battery pack, and that 3U of free rack space is available close to the UPS for a short cable run.
What the APC SRV240RLBP-9A adds to a UPS
An external pack stores energy; it does not condition power or switch the load. Those jobs stay with the UPS. When mains power fails, the UPS draws on its internal battery and on every external pack connected to it, so adding the SRV240RLBP-9A enlarges the reserve that the load runs on. The rating that matters here is 2160VAh: it describes how much energy the pack contributes, and it is the figure to use when comparing packs or working out how many to add. How many minutes that buys depends on the load and on the UPS model, so the runtime table in the UPS documentation is the place to finish the calculation. The practical outcome is longer bridging time: enough for a standby generator to start and pick up the load, for servers to close their databases cleanly, or for a video recorder to keep writing through a short outage.
Saudi sites that need a 240 V battery string
Packs at this voltage belong in rooms where one UPS carries a substantial load. Typical homes for it in the Kingdom include data rooms in hospitals and clinics, where patient record systems and nurse-call servers cannot simply stop; server rooms in government offices and banks; control rooms for CCTV and access control on industrial sites, ports and logistics yards; and the main communications room of a hotel or mall, where the PBX, the network core and the surveillance recorders share a single protected power feed. In each case the value of extra battery is measured in avoided disruption: a recorder that keeps capturing footage, a switch that keeps the site online, or an orderly shutdown instead of a crash. Lead-acid cells age faster in heat, so in the Saudi climate the rack should stand in an air-conditioned room rather than in an unconditioned cabinet or plant room.
SRV240RLBP-9A against other SRV battery packs
The SRV range is split by battery voltage first and by form factor second. The SRV36BP-9A sits at the other end of the scale at 36 V, 648 VAh, intended for UPS units with a low-voltage battery input, and the two packs are not interchangeable. The SRV240BP-9A is listed at the same 240 V, 2160 VAh as this pack; what defines the SRV240RLBP-9A is its 3U rack-mount format and the rack hardware supplied with it. If your UPS manual names one of the two part numbers, order that one, since the mounting arrangement is part of the system design. The SRV72BP-9A serves a lower-voltage UPS input and is not an option for a 240 V system.
Installation notes
Plan 3U of rack space as close to the UPS as practical, and check that the rack and its rails can carry a pack holding 20 lead-acid blocks. Fix the pack with the supplied rack-mount brackets and flat-head screws, then connect it to the UPS with the supplied battery cable, following the sequence in the user manual. Because the cable length is fixed, the position of the UPS battery connector decides where the pack can go in the rack, so settle that before mounting anything. Leave space for airflow, keep the battery cable clear of data cabling, and record the installation date in the asset register. The pack carries a 24-month warranty, and logging the date makes both warranty claims and planned replacement straightforward.
Package Contents
- Battery pack
- User manual
- Battery cable, L=600 mm
- Flat-head screws × 8
- Rack-mount brackets × 2
Technical Specifications
- Brand
- APC
- Warranty
- 2 Years
- Battery Details
- lead-acid
- Model
- SRV240RLBP-9A
- Power
- 2160VAh
Frequently Asked Questions
What voltage and rating does the APC SRV240RLBP-9A have?
It forms a 240 V battery string rated at 2160VAh, built from 20 lead-acid blocks of 12 V, 9 Ah each.
How much rack space does the SRV240RLBP-9A need?
3U. The rack-mount brackets and flat-head screws needed to fix it are included in the box, together with the battery cable.
How does it differ from the SRV240BP-9A?
The SRV240BP-9A is listed at the same 240 V, 2160 VAh. The SRV240RLBP-9A is defined by its 3U rack-mount format and the rack hardware in its box, so order the part number your UPS documentation names.
What warranty applies to the SRV240RLBP-9A?
The pack carries a 24-month warranty. Recording the installation date makes any claim and the planned replacement easier to manage.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRVL2KRILRK Lithium-ion UPS 2000 VA
On backorder
APC SRV1KI Online Tower UPS 1000 VA
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder
APC SMT1500RMI2UC Smart-UPS 1500VA 2U Rack SmartConnect
On backorder






Reviews
There are no reviews yet.