APC PDM3532IEC-620 Power Distribution Module
Power distribution module with a 620 cm output cable for an intermediate cable route. Includes a 32 A maximum line current, a three-pole breaker and circuit monitoring.
Original price was: 2,940.47 SAR.2,764.04 SARCurrent price is: 2,764.04 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC PDM3532IEC-620 is the intermediate cable-length choice for a planned power distribution connection. With a 620 cm output cable, it sits between PDM3532IEC-200 and PDM3532IEC-1040 when the installation route is the main distinction. The module combines a 400 V three-phase input with a 32 A maximum line current, an IEC 309 outlet, a three-pole breaker and circuit monitoring. It is worth considering when the destination is beyond a nearby connection but the layout does not call for the longest cable version. For a project buyer, the task is to connect this model reference to a measured route and an approved electrical arrangement before placing the order.
APC PDM3532IEC-620 in the installation layout
The output cable length supports a specific routing decision. Start by identifying the module location and the receiving connection, then measure the path the installer will actually follow. Include changes in direction and the approach to the equipment rather than treating the straight-line separation as the required length. The intermediate version is useful when that surveyed route fits its cable. Agree the proposed path with the installation team so that the order describes a workable connection and the cable can be arranged within the allocated equipment area.
A route extending across the equipment layout needs attention to support and access. Decide how the cable will pass existing services, where it will be supported and how the endpoint can remain available for inspection. The choice of this model should reflect those details. Having an intermediate length available lets the buyer consider a route that is too extended for a short lead without automatically selecting the longest option. The final choice should follow the site layout, with any later relocation of the endpoint prompting a fresh check of the route.
Match the electrical source
The specified input is 400 V three-phase and the frequency is 50 Hz. For a Saudi installation, verify both against the intended electrical source during project review. The module should be assessed at its actual connection point, since a general description of a building’s supply is insufficient for selecting a particular electrical component. Put these requirements into the purchase specification and have the responsible electrician review them. This gives facilities management and procurement a clear basis for approving the module for the planned circuit.
Maximum current draw and maximum line current are each 32 A. Review the proposed circuit load against those ratings as part of the electrical design. The cable-length position within the family is a separate matter from that load review. A longer or shorter route does not establish the capacity needed by the connected equipment. Keeping the current requirement alongside the complete model name helps avoid an order being selected on cable length alone, particularly where the project contains several distribution connections with different physical layouts.
Outgoing connection and circuit features
The outgoing interface is one IEC 309 32 A outlet. Confirm that the receiving connection matches it before committing the module to the installation plan. The integrated three-pole breaker and circuit monitoring should also be considered when the team documents the distribution circuit. Give the module an identifiable position in the circuit schedule and preserve that reference at handover. The facilities team can then associate the physical equipment with its intended role when reviewing the installation, planning work or specifying a replacement for the same connection arrangement.
Use cases and comparison with related models
This version can be evaluated for commercial premises, managed equipment spaces and contractor-delivered electrical projects in Saudi Arabia where its supply requirements match. Its distinguishing role is the intermediate cable route: PDM3532IEC-200 is the shorter alternative and PDM3532IEC-1040 provides the longer cable choice. Measure before choosing among them, and check the connector and circuit requirements independently of that comparison. The module has a grey finish and a 1 Year warranty. Before handover, record the selected route, source and model together, giving the operations team a clear reference for maintenance discussions and future procurement when the installation layout is reviewed.
Package Contents
- Power distribution module
- Installation guide
Technical Specifications
- Brand
- APC
- Warranty
- 1 Year
- Model
- PDM3532IEC-620
Frequently Asked Questions
What distinguishes this cable version?
Its output cable is 620 cm long.
What are the input voltage and frequency?
The input is 400 V three-phase and the stated frequency is 50 Hz.
What outlet does it provide?
It provides one IEC 309 32 A outlet.
Does the module have a circuit breaker?
It includes a three-pole breaker and supports circuit monitoring.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC ER7PDUBRKT Double-Width PDU Mounting Brackets, Black
On backorder
APC AP6020A Zero U Rack PDU, 13 C13 Outlets, C20 Inlet
On backorder
APC APDU9953 Switched Rack PDU, 32A 230V, 21 C13 + 3 C19
On backorder
APC AP4423A Rack Transfer Switch 1U 16A, 3700 VA
On backorder





Reviews
There are no reviews yet.