APC AP4423A Rack Transfer Switch 1U 16A, 3700 VA
APC AP4423A is a 1U rack automatic transfer switch for 230 V AC single-phase supplies, with 3700 VA load capacity, 2 C20 inputs, 8 C13 outlets and 1 C19 outlet.
Original price was: 5,225.84 SAR.4,912.29 SARCurrent price is: 4,912.29 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
When a rack carries more than light network gear, APC AP4423A combines automatic source transfer with a 3700 VA load capacity on a 230 V AC single-phase supply. This 1U transfer switch takes power through 2 x IEC 60320 C20 16 A inputs, one for each source, and delivers it to 9 outputs: 8 IEC 60320 C13 10 A outlets for the usual servers and switches, and 1 IEC 60320 C19 16 A outlet reserved for the heaviest device in the rack. If the primary source fails, the whole load moves to the alternate source, so single-corded equipment keeps running through a fault on the first feed. That pairing of a C19 outlet with C20 inputs is what separates AP4423A from the lighter model in the family, and it makes this the natural choice for a rack that holds a storage server or a core device fitted with a high-current plug.
Working with the 3700 VA budget and the C19 outlet
The 3700 VA rating is the ceiling the whole rack shares. Before anything is plugged in, the designer adds up the real draw of each device from its datasheet and confirms the total stays below that figure with a comfortable margin. The C19 outlet deserves its own line in the plan: it is the only 16 A outlet on the unit, so it belongs to the device whose cord ends in a C20 plug, such as a large server, a storage array or a core switch, while everything else spreads across the 8 C13 outlets.
The 16 A C20 inputs set the requirement on the supply side. Each source has to offer an outlet able to deliver that current, and each reaches the unit through a cord with a C19 connector that mates with the C20 inlet. Operation at 50/60 Hz matches the frequency of the grid supply across the Kingdom.
APC AP4423A across Saudi sectors
Hospital and university server rooms that hold a storage unit next to their servers and switches; surveillance control rooms where a video management server runs alongside the camera recorders; IT cabinets in industrial site offices and utility facilities. These are rooms where one high-draw device sits with a group of medium loads. AP4423A puts the heavy device on the C19 outlet and the rest on C13 outlets, all behind one transfer switch that protects the rack from losing either source. For bank branches and contact centres that run around the clock, that means servicing a UPS or isolating a distribution board no longer interrupts the service.
Where AP4423A sits between AP4421A and AP4424A
AP4423A is the middle of the family. AP4421A, rated 230 V AC, 10 A, keeps to lighter inputs and C13 outlets only, and suits racks with light network loads. AP4424A, rated 32A at 230V, moves to a taller chassis, industrial-style inputs and a far larger outlet count for a fully populated cabinet. Choose AP4423A when the rack needs a high-current outlet and its load stays inside 3700 VA; it delivers that in 1U without asking for industrial sockets on the supply side.
Installing APC AP4423A
The unit mounts in 1U and ships with rack mounting brackets, mounting hardware and a serial configuration cable for initial setup. Prepare two genuinely independent sources, for example separate UPS units or separate distribution boards, and give each a cord with a C19 connector for its C20 inlet. Then assign the C19 outlet to the highest-draw device, spread the remaining equipment across the C13 outlets, and record which device sits on each outlet so maintenance staff can trace any cord quickly.
Package Contents
- Mounting hardware
- Rack mounting brackets
- Serial configuration cable
Technical Specifications
- Brand
- APC
- Model
- AP4423A
- Mounting
- 1U
- Ports
- input: 2 IEC 60320 C20 inlets; output: 8 IEC 60320 C13 outlets and 1 IEC 60320 C19 outlet
Frequently Asked Questions
What is the load capacity of APC AP4423A?
Its load capacity is 3700 VA on a 230 V AC single-phase supply.
Which outlets does it provide?
It has 9 outputs: 8 IEC 60320 C13 10 A outlets and 1 IEC 60320 C19 16 A outlet.
What input connectors does it use?
Power enters through 2 x IEC 60320 C20 16 A inputs, one for each source.
How much rack space does it need?
It mounts in 1U and ships with rack mounting brackets, mounting hardware and a serial configuration cable.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC AP6015A 1U Rack PDU, 8 C13 Outlets, 15A Input
On backorder
APC AP6032A Rack PDU, 4 C19 Outlets, 32A IEC 60309 Input
On backorder
APC APDU9953 Switched Rack PDU, 32A 230V, 21 C13 + 3 C19
On backorder
APC AP8653 Metered-by-Outlet Switched Rack PDU 32A
On backorder






Reviews
There are no reviews yet.