APC PDM3516IEC-1040 Power Distribution Module
Power distribution module with a 1040 cm output cable, 16 A current rating and a single IEC 309 outlet. Circuit monitoring and automatic module detection support integration with a Modular PDU.
Original price was: 3,085.49 SAR.2,900.36 SARCurrent price is: 2,900.36 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC PDM3516IEC-1040 is a power distribution module for projects where the cable route deserves as much attention as the electrical rating. Its 1040 cm output cable gives facilities teams a defined length to assess against the path between distribution equipment and the intended connection. The module combines a 16 A rating with a single IEC 309 outlet, circuit monitoring and automatic identification by the Modular PDU. For a buyer balancing coverage with the needs of a particular installation, the useful starting point is the actual route: where the cable travels, where it terminates and how technicians will reach it later. This model suits a selection process built around those practical requirements rather than the model name alone.
APC PDM3516IEC-1040 in an electrical distribution plan
The input is 400 V three-phase at 50 Hz. Maximum current draw is 16 A, and maximum line current is also 16 A. These ratings give the electrical contractor concrete limits to compare with the proposed supply and connected load. Use the planned operating load as the basis for selection, with the installation designer assessing the complete circuit. A cable that reaches the destination still needs the correct electrical arrangement at its source and at the equipment connection.
The single IEC 309 16 A outlet makes the termination a key purchasing detail. Check the mating connection before ordering and mark that interface on the installation drawing. This is particularly useful when procurement, electrical installation and equipment commissioning sit with different contractors. A shared description of the connection reduces the risk of a module arriving at site with a destination that has not been prepared for it.
Cable reach and service access
The 1040 cm output cable should be assessed along the intended path, including changes in direction and the approach to the connection point. A direct measurement across a room can overlook the distance introduced by an organised cable route. Plan where the run will be supported and how access to nearby equipment will be maintained. The value of this cable length depends on how closely it matches the installed path, so establish that path before finalising the purchase.
The grey module measures 15.2 cm high, 43.2 cm wide and 40.6 cm deep, with a net weight of 4.29 kg. Check these dimensions against the available space and the approach needed for installation. Include the module in the physical layout rather than considering only the cable destination. Leave the installer a clear understanding of where the body sits and where the output cable continues into the distribution route.
Monitoring during operation
Circuit monitoring supports the operational review of the distribution circuit, while automatic module detection allows the Modular PDU to identify the module. For facilities teams, these functions make the module relevant to ongoing operation as well as initial connection. Include circuit identification in the handover documents so the operations team can relate the installed module to the equipment it serves. The module also incorporates one three-pole breaker, which should be represented in the circuit documentation.
Choosing within the APC family
Review PDM3516IEC-260 and PDM3516IEC-320 alongside this model when specifying an APC distribution project. Use the required cable route and connection arrangement to decide which exact reference belongs on the order. The broader family also contains AP9559 and AP9565; keep those model references distinct when matching a bill of materials to the intended distribution design. A similar brand or family description is not a substitute for matching the selected module to its assigned circuit.
Saudi project deployment and handover
In a Saudi data room, commercial facilities project or operations centre, evaluate this module where the distribution design calls for its electrical input and outlet. Have the project electrician confirm the supply before installation, and coordinate the cable path with the team responsible for equipment placement. The installation guide supports that preparation, while the 12-month warranty is relevant to procurement handover. Record the exact model, cable destination and circuit association so maintenance staff can identify the installed module when the room layout or connected equipment changes.
Package Contents
- Installation guide
Technical Specifications
- Brand
- APC
- Warranty
- 1 Year
- Model
- PDM3516IEC-1040
- Power
- 16 A
Frequently Asked Questions
What distinguishes this module when planning the cable route?
Its output cable measures 1040 cm. Measure the complete installed route, including routing around equipment and access areas, before selecting it.
What electrical supply should the installer assess?
The module has a 400 V three-phase input at 50 Hz. Maximum current draw and maximum line current are both 16 A.
Which outlet and breaker does it have?
It has a single IEC 309 16 A outlet and one three-pole breaker.
Does it support monitoring and module identification?
It provides circuit monitoring and automatic module detection by the Modular PDU. The warranty is 12 months.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC AP4424A Rack Transfer Switch 2U 32A, 18 Outlets
On backorder
APC AP6015A 1U Rack PDU, 8 C13 Outlets, 15A Input
On backorder
APC ER7PDUBRKT Double-Width PDU Mounting Brackets, Black
On backorder
APC APDU9959NA3 Switched Rack PDU, 20A 208V, L620 Cord
On backorder





Reviews
There are no reviews yet.