APC PDM1332IEC-3P Power Distribution Module 32 A
A 32 A power distribution module with circuit monitoring, automatic detection by the Modular PDU and three single-pole breakers. Output cables measure 300, 360 and 420 cm.
Original price was: 3,815.61 SAR.3,586.67 SARCurrent price is: 3,586.67 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC PDM1332IEC-3P is a 32 A power distribution module for a modular power arrangement, combining circuit monitoring with output cables of different lengths. Its 300 cm, 360 cm and 420 cm cable lengths give the installation team specific routing distances to work with when positioning downstream connections. The module accepts 400 V three-phase power at 50 Hz and supplies 230 V output through three IEC 309 32 A 2P + E connections. It suits a buyer planning how a modular distribution system will reach its loads, with the electrical interfaces and cable paths decided together. Automatic detection by the Modular PDU and three single-pole breakers are part of this module’s distribution arrangement.
APC PDM1332IEC-3P and circuit planning
Circuit monitoring makes this module relevant where the operations team needs monitored distribution circuits within a modular power system. Include those circuits in the site electrical schedule, with a clear record of their downstream destinations. The Modular PDU automatically detects the module, so the installation belongs in the planning of that parent distribution system. Before ordering, have the project team match the module to the intended modular equipment and connection arrangement rather than treating it as a standalone rack socket strip.
The three single-pole breakers are a further reason to document the circuit destinations during installation. Keep the breaker identification and the downstream connection identification consistent, so a technician can relate the physical circuit to the correct load area during maintenance. Coordinate circuit changes with the people responsible for the connected equipment. This is especially useful when a site has separate facilities and IT teams, because each team needs the same understanding of which equipment a circuit serves.
Electrical interfaces and cable routes
The module’s maximum current draw and maximum line current are 32 A. Its input is 400 V three-phase at 50 Hz, while its output voltage is 230 V. Confirm those values against the planned upstream arrangement and downstream equipment. The outlets are three IEC 309 32 A 2P + E connections. Check the receiving connections before finalising the installation plan; connector type is a purchasing requirement as well as an installation detail.
The output cable lengths are 300 cm, 360 cm and 420 cm. Use these individual lengths to allocate destinations according to the actual route each cable will follow. Measure around trays, cabinet frames and the other fixed features of the room. A destination that appears close on a floor plan may need a longer routed path. Decide the cable allocation before securing the runs, and preserve identification along each route so the destination remains clear when other cabling is added later.
Physical fit and sibling selection
The grey enclosure measures 15.2 cm high, 43.2 cm wide and 15.2 cm deep, with a net weight of 6.39 kg. These measurements help the installer check space, handling and access around the chosen position. Allow room for the outgoing cables as well as the enclosure itself. Confirm the supporting arrangement with the installation instructions and the project layout before delivery, particularly when fitting the module into an already populated electrical area.
Depth is an explicit distinction from PDM1332IEC-3P-3: PDM1332IEC-3P is 15.2 cm deep, whereas PDM1332IEC-3P-3 is 43.2 cm deep. Keep the full model reference on the purchase order and installation drawing so the intended enclosure is selected. The PDM1332IEC-3P also has the defined staggered output cable lengths for route planning. Within the wider family, EPDU1232B serves a different rack distribution role with C13 and C19 equipment outlets; choose by the required connection interface and distribution layout.
Use in Saudi facilities
For a Saudi enterprise data room, hospital support facility or industrial communications area, this module can form part of a modular distribution project where its supply and output connections match the site design. Review the circuit destinations with the electrical contractor before committing to equipment locations. At handover, retain the cable routing plan, module reference and breaker identification together. The warranty is 1 Year. These practical records support later equipment moves because the team can review the installed distribution path before rearranging loads or changing the room layout.
Package Contents
- Installation guide
Technical Specifications
- Brand
- APC
- Warranty
- 1 Year
- Model
- PDM1332IEC-3P
- Power
- 32 A
Frequently Asked Questions
What are the output cable lengths?
The PDM1332IEC-3P has output cable lengths of 300 cm, 360 cm and 420 cm.
What electrical connections does it provide?
It provides three IEC 309 32 A 2P + E outputs at 230 V, with a 400 V three-phase, 50 Hz input.
Does the module include circuit monitoring?
It includes circuit monitoring and automatic module detection by the Modular PDU, together with three single-pole breakers.
How does its depth compare with PDM1332IEC-3P-3?
PDM1332IEC-3P is 15.2 cm deep; PDM1332IEC-3P-3 is 43.2 cm deep.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC AP7922B Switched Rack PDU, 32 A, 2U, 16 C13 Outlets
On backorder
APC APDU9959NA3 Switched Rack PDU, 20A 208V, L620 Cord
On backorder
APC AP7820B Metered Rack PDU, 1U, 8 x C13 Outlets
On backorder
APC AP6015A 1U Rack PDU, 8 C13 Outlets, 15A Input
On backorder





Reviews
There are no reviews yet.