ZKTeco KR702E Waterproof EM Card Reader
Waterproof EM card reader with 125 kHz card support, Wiegand 26 connectivity and a 0–8 cm reading distance. Card capacity is 5,000 cards.
80.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco KR702E is a waterproof EM card reader for access points built around card presentation. Its place in the reader family is a focused combination of EM credentials, water resistance and Wiegand 26 connectivity. For a Saudi facilities team, the purchase decision starts with the cards already issued and the input format accepted by the access controller. The reader operates at 125 kHz, has a reading distance of 0–8 cm and carries a capacity of 5,000 cards. These details help define its role at the doorway: a close presentation point for employees carrying compatible cards. Select it where that arrangement matches the building’s access design, and assess the doorway and controller together before extending the choice across the site.
ZKTeco KR702E in daily use
The close reading distance makes reader placement a practical part of the project. Position the presentation point where someone approaching the door can bring a card near it without reaching across the door movement. At an office entrance, this means reviewing the approach from the corridor as well as the final mounting location. A location that is convenient for the installer can still be awkward for employees, so include a card presentation check during the doorway review.
EM card support should guide credential purchasing. A facility retaining existing cards should match their type and frequency to the reader before ordering for additional entrances. A new building should choose the cards and readers as part of the same access project. Card appearance alone is not a useful compatibility check. Confirm the credential type with the security team, then test an actual site card in the proposed controller arrangement before repeating that arrangement elsewhere.
Where it fits in Saudi facilities
Administrative offices can consider KR702E for staff entrances that use EM cards. The operational benefit is a clearly defined presentation point at the door, with credential reading connected to the site’s access control arrangement. For education administration buildings and service facilities, the same selection applies to employee access points using this card type. Map the reader locations against the spaces requiring controlled entry, then let the access system’s configuration determine the permissions associated with those credentials.
Waterproof construction is also relevant when selecting a reader for an entrance where water resistance matters. Review the physical location, the wiring route and the mounting arrangement with the installation team. Treat the reader as part of the complete doorway design: people need to reach it comfortably, and the installer needs a suitable route back to the controller. A site review brings those decisions together before equipment is bought for several locations.
Choosing among related readers
MR1010 carries IP66 and IK10 ratings, making that model a useful comparison when environmental protection and resistance to impact drive the selection. KR702E instead offers its own combination of waterproof EM reading and a defined Wiegand connection. Separate the credential requirement from the enclosure requirement during procurement. This helps avoid selecting a device solely because it belongs to the same manufacturer’s access reader family.
KR500H-HID carries an IP67 rating, while KR100E carries IP65. These named alternatives are worth reviewing when a project calls for a particular protection rating. Apply each rating to its own model when comparing the options. For KR702E, keep the verified EM card arrangement and controller interface at the centre of the decision, then review whether its waterproof reader construction suits the intended location.
Integration and purchasing checks
The Wiegand 26 connection gives the integration team a specific output format to match to the controller. Review the intended reader input before ordering, and include a trial with an issued card in the commissioning plan. Check that the controller receives the credential in the expected format and that the door arrangement behaves according to the site’s access configuration. This practical trial is particularly useful before repeating the installation across a larger property.
Use the card capacity when reviewing the scale of the proposed credential population, alongside the wider access system design. Reader selection, permissions and the distribution of doors are related procurement decisions. KR702E fits a project seeking waterproof EM card presentation with the stated Wiegand interface. Bring the security manager and installer into the selection early so that card choice, physical placement and controller matching are settled together.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- EM card
- Capacity
- 5,000 cards
- Connectivity
- Wiegand 26
- Device Type
- Waterproof EM card reader
- Model
- KR702E
Frequently Asked Questions
Which cards does KR702E read?
It reads EM cards at 125 kHz.
What connection does it use?
The reader uses Wiegand 26. Match this format to the access controller input.
What are its reading distance and card capacity?
Its reading distance is 0–8 cm and its card capacity is 5,000 cards.
Is it waterproof?
KR702E is a waterproof EM card reader, making water resistance part of its entry-point selection.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-SpeedFace-V5L-MiFare Biometric Access Terminal
On backorder
ZKTeco ZK-SF200 Fingerprint Attendance and Access Terminal
On backorder
ZKTeco ZK-SC103 RFID Standalone Access Control Terminal
On backorder
ZKTeco FR1200 Fingerprint and RFID Access Reader
On backorder





Reviews
There are no reviews yet.