ZKTeco ZK-SpeedFace-V5L-MiFare Biometric Access Terminal
Biometric access terminal combining face, fingerprint, card and password authentication, with 10,000-user capacity. Optional palm recognition requires the 1GB RAM board; dual-band Wi-Fi and 13.56 MHz IC cards are optional.
1,245.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco SpeedFace-V5L-MiFare is a biometric access control terminal for projects that want face and fingerprint identification alongside cards and passwords; it suits a procurement brief built around several credential methods rather than a single enrollment route. A Saudi facilities manager can assess it for staff entrances where different personnel groups follow different identification procedures, while keeping the selected configuration tied to the site’s policy; capacity reaches 10,000 users, with corresponding capacities for faces, fingerprints and cards. The optional palm function introduces a hardware choice that deserves attention before purchase: it applies to the 1GB RAM board; optional IC cards and wireless networking are further decisions to resolve when defining the exact terminal configuration.
ZKTeco SpeedFace-V5L-MiFare for mixed credential policies
Face, fingerprint, card and password support gives the security team several ways to structure enrollment; an organization may prefer face recognition for an employee group while retaining fingerprint or card identification within other approved procedures. Decide which methods staff should use before enrollment begins, and ensure the personnel responsible for issuing credentials understand that policy; the practical benefit is a terminal that can participate in different identification workflows; the choice of workflow should still follow the organization’s access requirements.
For a Saudi company headquarters, the discussion may begin with employee onboarding and the method used at a departmental entrance; in a warehouse administration building, it may center on keeping credential management clear as staff assignments change. These are proposed deployment settings for the terminal’s authentication options; review each entrance on its own operating requirements, including how personnel will be registered and who will maintain those registrations, rather than assuming the same procedure suits every area.
Capacity for people, credentials and activity
The terminal supports 10,000 fingerprints, 10,000 faces, 10,000 cards and 10,000 users; use each figure against the matching part of the enrollment plan. They describe different limits, so adding them together would give a misleading picture of the workforce the terminal can accommodate; when personnel receive several credential types, keep the user count and the credential records aligned in the project plan. Include foreseeable staff changes and contractor enrollment when reviewing whether the capacity fits the intended location.
Transaction capacity is 200,000 records; this is an activity-storage figure and should be assessed separately from enrollment. Ask the operations team to consider how frequently the entrance will be used and how access records will be handled within the site’s procedures; frequent movement can make record planning important even when the enrolled workforce is comfortably within capacity. The distinction helps procurement avoid choosing solely on the headline user count while overlooking the operational handling of access activity.
Palm and IC card configuration decisions
Palm recognition is optional, with capacity for 3,000 palms only on the 1GB RAM board; if palm authentication is part of the intended workflow, specify that board requirement together with the function. Treat it as a configuration dependency during purchasing, not an assumption to resolve after installation; if the organization plans to use the other supported identification methods, define those clearly so the supplied configuration follows the actual credential policy, alongside the planned TCP/IP, Wiegand or RS485 integration.
The card option is 13.56 MHz IC; review that choice with whoever manages the site’s cards and identify the required reader configuration before placing the order. The MiFare model designation should accompany that discussion, while the purchase specification should state the optional card configuration explicitly; this keeps the selection tied to the intended credentials and gives the installer a clear requirement to check during commissioning.
Integration planning and family selection
TCP/IP, Wiegand and RS485 are available connection interfaces, with dual-band Wi-Fi optional; access-control interfaces also form part of the terminal’s role in the entrance system. Have the installer review the chosen TCP/IP, Wiegand or RS485 connection route and the receiving equipment, then coordinate any wireless option with the IT team; when considering SpeedFace M4 or SpeedFace-V5L[P] WIFI alongside this model, use the intended credential workflow as the comparison framework. For SpeedFace-V5L-MiFare, the buying decision centers on its combined face and fingerprint capabilities, its enrollment limits, and whether the optional palm, IC card and wireless configurations belong in the project; record those decisions before commissioning so the security team receives the configuration it plans to operate.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- Face, fingerprint, optional palm, card and password
- Capacity
- 10,000 fingerprints/faces/cards/users; 200,000 transactions; optional 3,000 palms only for 1GB RAM board
- Connectivity
- TCP/IP, optional dual-band Wi-Fi, Wiegand, RS485
- Device Type
- Biometric access control terminal
- Model
- ZK-SpeedFace-V5L-MiFare
Frequently Asked Questions
Which identification methods are supported?
Face, fingerprint, card and password authentication are supported, with palm recognition optional.
What does the optional palm configuration require?
The optional 3,000-palm capacity applies only to the 1GB RAM board.
What are the enrollment capacities?
The terminal supports 10,000 fingerprints, 10,000 faces, 10,000 cards and 10,000 users, plus 200,000 transaction records.
Which networking and card options should be specified?
Connectivity includes TCP/IP, Wiegand and RS485, with dual-band Wi-Fi optional. The 13.56 MHz IC card option should also be specified when required.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco FR1300 Indoor Slave Access Reader
On backorder
ZKTeco F18 Fingerprint Access Control Reader
On backorder
ZKTeco ZK-SCR100 Standalone RFID Access Controller
On backorder
ZKTeco F22 Fingerprint Attendance and Access Terminal
On backorder





Reviews
There are no reviews yet.