ZKTeco ZK-KR100E Proximity Card Reader IP65
Indoor/outdoor reader for 125 kHz EM cards with default 26-bit Wiegand output and IP65 protection. Operates on 6–14V DC at a maximum current of 70mA.
80.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco ZK-KR100E is a proximity card reader for indoor and outdoor access points using 125 kHz EM cards. Its electrical specification is useful when fitting a reader into an existing installation: it accepts 6–14V DC, with a maximum current of 70mA. The default output is 26-bit Wiegand, so the receiving access equipment must be selected around that interface. With an IP65 rating, a read range of up to 10cm and external control of the LED and buzzer, it suits a project brief centred on card presentation and coordinated reader feedback. Start the selection with the site’s card format, controller input and available DC supply.
ZKTeco ZK-KR100E and the supply design
The variable DC input range gives the installer a defined electrical window to work within. Check the supply at the proposed reader location and include the maximum current requirement in the project’s power planning. This matters when replacing a reading point in an occupied building, where the existing power arrangement should be reviewed alongside the new reader. Agree the supply connection before commissioning so the installation follows the reader’s electrical requirements.
Match EM credentials to the Wiegand input
The card technology is 125 kHz EM. For a Saudi business already issuing EM credentials, the KR100E can be assessed as a reading point for that card programme. Ask the integrator to confirm the card format used at the entrance and demonstrate a representative credential. Reviewing an actual employee card is a practical step when the building has received access equipment through different fit-out or maintenance projects.
The default 26-bit Wiegand output is another selection condition. Confirm that the receiving equipment accepts the required output format and include this in the installation brief. Card compatibility and controller input are separate checks: a reader needs to match the credential presented by the employee and the equipment receiving its output. Bringing both into the procurement review helps the team choose the reading point for the intended access system.
Card presentation and user feedback
A read range of up to 10cm supports close card presentation at the entrance. The stated reading time is no more than 300ms. Use these figures to discuss the reader interaction with the installation team, and demonstrate the chosen card at the completed access point. Treat the reading time as the card reading specification when planning the interaction; door hardware and the receiving system are separate parts of the entrance project.
External LED and buzzer control inputs let the project include visual and audible indication in its wiring design. Agree how the receiving equipment will drive those inputs and how the resulting indications should be explained to users. At handover, demonstrate the configured signals as well as the card read. This is useful for a facilities team that wants the reader’s visible and audible behaviour to follow the access system’s intended operation.
Indoor and outdoor placement in Saudi sites
The KR100E is specified for indoor and outdoor operation and carries IP65 protection. Consider it for employee entrances in office premises, administrative access points at logistics sites or card-controlled departmental entrances. Match the chosen location with the reader’s installation requirements and the route to the receiving equipment. In a refurbishment, review the proposed position together with the existing wiring before approving the replacement or extension work.
Choose the family member around the entrance
The FR1300 requires a fixed DC supply, while the KR100E accepts a variable DC supply range. Both the KR100E and FR1500WP carry IP65 ratings, so that shared protection rating is only part of the comparison. For the KR100E, the useful selection criteria are EM credentials, default Wiegand output, indoor/outdoor operation and external indication controls. Use those requirements to define the entrance brief, then have the integrator demonstrate the selected reader with the site’s cards and receiving equipment.
Technical Specifications
- Brand
- ZKTeco
- IP Rating
- IP65
- Authentication Method
- 125 kHz EM cards
- Connectivity
- 26-bit Wiegand output (default)
- Device Type
- 125kHz Proximity Card Reader
- Model
- ZK-KR100E
- Power
- 6–14V DC, max 70mA
Frequently Asked Questions
Which cards and output format does the KR100E use?
It reads 125 kHz EM cards and provides 26-bit Wiegand output by default.
What are its electrical requirements?
It accepts 6–14V DC and has a maximum current of 70mA.
Can it be installed outside?
It is specified for indoor and outdoor operation and carries an IP65 rating.
How close should the card be presented?
The read range is up to 10cm. The stated reading time is no more than 300ms.
What external controls are provided?
There are external LED and buzzer control inputs, allowing those indications to be incorporated into the installation design.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco F22 Fingerprint Attendance and Access Terminal
On backorder
ZKTeco SF300 Fingerprint Access Control Terminal
On backorder
ZKTeco ZK-SpeedFace-V5L-MiFare Biometric Access Terminal
On backorder
ZKTeco ZK-SF200 Fingerprint Attendance and Access Terminal
On backorder





Reviews
There are no reviews yet.