APC AP6032A Rack PDU, 4 C19 Outlets, 32A IEC 60309 Input
An APC rack PDU that takes a 230V supply at up to 32A through an IEC 60309 32A 2P+E plug and splits it across four IEC 60320 C19 outlets for high-draw equipment.
Original price was: 850.14 SAR.799.13 SARCurrent price is: 799.13 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC AP6032A is a rack PDU built for heavy loads rather than for a long row of small devices. It runs on 230V with a maximum input current of 32A, and it spends that capacity on just four IEC 60320 C19 outlets. That is what sets it apart from most units in this family: they spread a smaller current across many lower-rated sockets, while the AP6032A gives each of its four loads the C19 receptacle that high-draw equipment is built to use. Power arrives through an IEC 60309 32A 2P+E industrial plug on the power cord supplied in the box, so the unit is fed from a dedicated industrial socket on a circuit sized for that current, never from an ordinary outlet. In a rack holding blade chassis, storage arrays or other large consumers, it is the shortest path from one strong circuit to a few heavy loads, with no adapters or extra leads behind the cabinet.
How the APC AP6032A works in a rack
The unit does one job: it takes a single 230V, 32A circuit and divides it across four C19 outlets. Because the input is an IEC 60309 32A 2P+E plug, the site needs a matching industrial receptacle on a circuit rated for that current. Have an electrician confirm the socket and its breaker before the cord is connected for the first time.
Four outlets is a deliberate limit. A C19 receptacle is intended for devices that draw more than smaller IEC sockets are designed to carry, so the AP6032A suits cabinets where a handful of large devices consume most of the power. Planning is simple: add up the expected draw of the connected equipment and keep the total inside the 32A input rating, with headroom for start-up peaks and later additions.
APC AP6032A in Saudi data rooms
In data centres and colocation halls, the AP6032A fits racks dedicated to storage or compute where a 230V, 32A feed is already run to each cabinet. When government entities and banks consolidate servers into central computer rooms in Riyadh, Jeddah or Dammam, it lets their heaviest racks draw on the full circuit through C19 outlets directly. Hospital data rooms, university research clusters and telecom equipment rooms share the same profile: few devices, high draw, a dedicated circuit.
Security integrators building central recording rooms for large CCTV projects, such as shopping malls, airports and industrial cities, can use it to feed the storage servers and recording arrays at the core of the system, keeping that heavy equipment on its own distribution, apart from the switches at the edge.
Choosing between the AP6032A and its siblings
If the rack is full of smaller devices, the AP6120A is the better match: it runs from 100-240V with a maximum input current of 20A and spreads its capacity across a broader mix of outlets. The AP7822B shares a 32 A IEC 60309 2P + E input and a 230 V output, so the choice between those two comes down to the outlet layout your equipment needs. The AP7155B is not a distribution unit at all but an in-line current meter for a 230V, 32A feed, used to watch a load rather than to add outlets. Pick the AP6032A when the requirement is maximum current delivered to a few large devices.
Deployment notes
Fix the PDU position in the rack before mounting it, check that the 32A IEC 60309 2P+E receptacle is within reach of the supplied cord, and label each C19 outlet with the device it feeds so the right load can be isolated during maintenance. The box also holds an installation guide and a safety guide; read both before the unit is energised.
Package Contents
- Power cord, 12 ft, IEC 60309 32A 2P+E plug
- Installation guide
- Safety guide
Technical Specifications
- Brand
- APC
- Model
- AP6032A
- Power
- 230V, max input current 32A
Frequently Asked Questions
What supply does the APC AP6032A need?
A 230V supply with a maximum input current of 32A, delivered through an IEC 60309 32A 2P+E industrial plug, so it needs a matching industrial receptacle on a circuit rated for that current.
How many outlets does the APC AP6032A have?
Four IEC 60320 C19 outlets, the receptacle intended for high-draw equipment such as large servers and storage arrays.
Is a power cord included?
Yes. The box contains a power cord fitted with an IEC 60309 32A 2P+E plug, along with an installation guide and a safety guide.
When should I choose the AP6032A over the AP6120A?
Choose the AP6032A for a few heavy loads on a 230V, 32A feed. A rack full of smaller devices is better served by the AP6120A, rated 100-240V at a maximum input current of 20A, with a broader outlet mix.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC AP6020A Zero U Rack PDU, 13 C13 Outlets, C20 Inlet
On backorder
APC AP7921B Switched Rack PDU, 16 A, 1U, 8 C13 Outlets
On backorder
APC AP8958EU3 0U Rack PDU 16A 230V with IEC309 Cord
On backorder
APC EPDU1116S Switched Rack PDU 16A, 20 C13 and 4 C19
On backorder





Reviews
There are no reviews yet.