APC AP8702S-WW Locking C13 to C14 Power Cord Kit, 0.6 m
A kit of six locking IEC C14 to C13 power cords, each 0.6 m and rated for a 10 A input, for short, tidy runs between a PDU and the equipment beside it.
Original price was: 285.05 SAR.267.95 SARCurrent price is: 267.95 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC AP8702S-WW is a kit of six locking power cords, each 0.6 m long, that run from an IEC C14 plug to an IEC C13 connector. It answers a narrow but constant rack problem: getting power from a PDU outlet to a server, switch or storage shelf a short distance away without a coil of surplus cable behind the equipment. The cords are rated for a 10 A input on an IEC 60320 C14 connection, the plug and socket pairing found across most IT equipment, so one kit covers the usual mix of devices in a cabinet. The locking connector holds each lead in place against an accidental tug while someone works at the rear of the rack. Within the APC cord-kit range it is the balanced choice: a full set of six at a short length that suits most adjacent-mount runs, without paying for colour coding your cabinets may not need.
What APC AP8702S-WW does in a working rack
Short cords change how the back of a cabinet behaves. At 0.6 m, each lead reaches from a vertical or horizontal PDU to equipment mounted close by, and the slack that a standard long cord leaves behind disappears. That keeps the rear clear for airflow and makes it easier to trace which outlet feeds which device when a fault has to be isolated. The C14 end goes into a C13 outlet on the PDU, and the C13 end goes into the C14 inlet on the equipment.
The locking design earns its place during maintenance. When a technician reaches past live cabling to swap a module or reseat a patch lead, an ordinary IEC connector can work loose without anyone noticing until a device drops. A locking cord stays seated until it is released on purpose, which turns a would-be outage into a non-event.
Because the kit is a cable accessory rather than a powered device, it takes no rack space and needs no mounting; the cords route along the cable management already in the cabinet.
Where it fits in Saudi facilities
Server rooms in government offices, hospital IT closets, bank branch racks and the network cabinets of retail chains share one pattern: dense equipment, limited depth and little tolerance for an unplanned shutdown. A pack of six short locking cords suits a new cabinet build-out, where every device in a half-populated rack can be patched neatly on day one, and it suits a cleanup project in an older room where long cords have piled up behind the equipment. For security integrators, the same kit tidies the power side of NVR, switch and storage racks that serve CCTV systems.
Choosing between APC AP8702S-WW and its coloured siblings
The same six-cord, 0.6 m locking format also comes in colour-coded versions: the AP8702S-WWX340 in red and the AP8702S-WWX590 in blue. Choose a coloured set when your site separates power paths by colour, for example marking the first feed in one colour and the second in another on equipment with redundant supplies. Choose the AP8702S-WW when colour coding is not part of your cabinet standard, or when the cords serve single-supply equipment with no second path to tell apart. If a run needs more reach than 0.6 m, check the other cord kits in the APC range before ordering.
Deployment notes
Map the PDU outlet for each device before ordering, and confirm that every run really falls within 0.6 m; equipment mounted far from the PDU needs a longer cord. Keep the load on each cord within its 10 A input rating, and remember that the PDU’s own rating governs the total load. The kit carries a 24-month warranty.
Package Contents
- Locking IEC power cord (C13 to C14, 0.6 m) × 6
Technical Specifications
- Brand
- APC
- Warranty
- 2 Years
- Model
- AP8702S-WW
- Mounting
- Not rack-mountable
- Power
- Input 10 A, IEC 60320 C14 connection
Frequently Asked Questions
How many cords are in the APC AP8702S-WW and how long is each?
The kit holds six power cords, each 0.6 m long.
Which connectors are on each end?
Each cord is a locking IEC C13 to C14 lead: the C14 end plugs into a C13 outlet on the PDU and the C13 end plugs into the C14 inlet on the equipment.
What current are the cords rated for?
They are rated for a 10 A input on an IEC 60320 C14 connection.
Does the kit take up rack space?
No. It is a cable accessory, not rack-mountable, and routes along existing cable management.
What warranty applies?
The kit carries a 24-month warranty.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SCL500RMI1UC Lithium-Ion 400W 1U Rackmount UPS
On backorder
APC SRVL2KRILRK Lithium-ion UPS 2000 VA
On backorder
APC SMV2000AI Line Interactive UPS with IEC Outlets
On backorder
APC SRT1000XLI Smart-UPS Tower UPS 1000 VA / 1000 W
On backorder





Reviews
There are no reviews yet.