Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandAPC

APC AP8714S Locking C19 to C20 Power Cord Kit, 1.2 m

Six 1.2 m locking cords from C20 to C19, rated 16 A, with the reach to cross a rack from the PDU to equipment on the far side while keeping slack manageable.

ModelAP8714SMountingNot rack-mountable

Original price was: 775.55 SAR.Current price is: 729.02 SAR. excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order15 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

APC AP8714S is the mid-length option among APC’s C19 to C20 locking cord kits: six cords at 1.2 m each, long enough to cross a rack from a PDU on one side to equipment on the other, yet short enough that the slack can be dressed neatly into cable managers. That balance suits racks holding a mix of device positions, where the team would rather stock a single cord length than two. Every cord is rated at 16 A, uses IEC 60320 C20 on the input end and C19 on the output end, and locks in place so routine work in the rack does not shake a connection loose. The kit serves high-draw servers, storage and network chassis whose power path is longer than a short patch but does not justify a long cord coiled in the rear of the cabinet.

How the APC AP8714S length works in practice

Length is what separates this kit from its siblings, so it is worth thinking through where 1.2 m lands. A vertical PDU mounted in the rear channel of a cabinet often sits some distance from devices at the far side of the rack. A cord of this length can usually span that gap and still leave a service loop, so a server can slide forward on its rails for maintenance without the cord pulling tight. Horizontal PDUs feeding equipment several positions above or below them benefit in the same way. Where a shorter cord would be stretched across the rack, the extra reach takes strain off both connectors; where a longer one would be bunched up, this length keeps the excess manageable.

The locking connection in daily operations

A locking connector holds against the tug that happens when someone pulls a neighbouring cable, swings a cable arm or removes a hot-swap module. In facilities where losing one supply of a redundant pair can go unnoticed for days, that retention is the practical benefit: connections stay made until an engineer chooses to release them. Each cord is rated for a maximum line current of 16 A, so it can serve a single high-draw device without becoming the weak link in the chain. The kit itself adds no capacity; the sizing of the circuit and the PDU still decides how many such devices a rack can host.

Saudi deployments that suit the AP8714S

Integrators fitting out new server rooms for government entities, banks and healthcare groups in the Kingdom often work with standard cabinets in which the PDU position is fixed before the equipment list is final. A mid-length kit gives them one cord that covers most device positions, which simplifies procurement and keeps spare stock uniform. Petrochemical and utility control rooms in Jubail, Yanbu and the Eastern Province, where operations staff work in the racks during shift handovers, gain from locking connectors that keep high-draw equipment powered through routine checks. Colocation tenants in Riyadh and Jeddah who move or add hardware frequently also benefit, because a 1.2 m cord can usually follow a device to a new position in the same rack without being replaced.

AP8714S against the AP8712S and AP8716R

Compared with the AP8712S, which supplies 0.6 m cords for devices sitting right next to their outlet, the AP8714S trades a little extra slack for much greater freedom in where equipment can sit. Compared with the AP8716R, which runs to 1.8 m and splits its six cords between left-angle and right-angle jumpers, the AP8714S keeps a shorter run that avoids long loops behind the gear. If most connections are short and predictable, the AP8712S is the tidier buy. If connector bodies collide with adjacent cables or the run is the longest in the rack, the AP8716R is the better fit. For everything in between, this kit is the balanced choice and the easiest single length to standardise on.

Before you install

Walk the cable route with a tape measure from each PDU outlet to each equipment inlet, allowing for the path through vertical managers and for a service loop if the device slides out on rails. Check the nameplate draw of each device against the 16 A rating, and confirm that the PDU outlet and its upstream breaker are sized for the combined load. Seat each connector until the lock engages, and confirm it with a gentle pull before closing the rack. Because the kit is not rack-mountable, plan where the cords will be dressed; hook-and-loop straps on the cable manager are easier to release later than tight cable ties. The cords hold CCC, CSA, PSE and VDE approvals and are UL listed, and the kit carries a 24-month warranty.

Package Contents

  • Locking C19 to C20 power cord × 6

Technical Specifications

Brand
APC
Warranty
2 Years
Model
AP8714S
Mounting
Not rack-mountable

Frequently Asked Questions

How long are the cords in the APC AP8714S kit?

Each of the six cords is 1.2 m long, enough to reach from a PDU to equipment on the far side of most racks while leaving a service loop.

How does the AP8714S differ from the AP8712S?

Both are locking C19 to C20 kits. The AP8712S uses 0.6 m cords for equipment right beside its outlet, while the AP8714S uses 1.2 m cords for longer paths across the rack.

What is the current rating of each AP8714S cord?

Each cord is rated for a maximum line current and maximum current draw of 16 A.

Which approvals do the AP8714S cords carry?

The cords carry CCC, CSA, PSE and VDE approvals and are UL listed. The kit has a 24-month warranty.

Brand
APC

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

APC

APC SMT2200RMI2UNC Smart-UPS 2200VA 2U with Network Card

Model SMT2200RMI2UNC
LCDRackmount 2U2200VA
Original price was: 7,609.11 SAR.Current price is: 7,152.56 SAR. excl. VAT Save 456.55 SAR

On backorder

Request a Quote
APC

APC SMT1500IC Smart-UPS Uninterruptible Power Supply

Model SMT1500IC
Original price was: 2,694.50 SAR.Current price is: 2,532.83 SAR. excl. VAT Save 161.67 SAR

On backorder

Request a Quote
APC

APC SRT1000XLI Smart-UPS Tower UPS 1000 VA / 1000 W

Model SRT1000XLI
Tower1000 W1000 VA
Original price was: 4,475.99 SAR.Current price is: 4,207.43 SAR. excl. VAT Save 268.56 SAR

On backorder

Request a Quote
APC

APC SMX3000HVNC 3kVA Smart-UPS with Network Card

Model SMX3000HVNC
4U rack3kVA2700W
Original price was: 8,784.86 SAR.Current price is: 8,257.77 SAR. excl. VAT Save 527.09 SAR

On backorder

Request a Quote

Original price was: 775.55 SAR.Current price is: 729.02 SAR. excl. VAT