APC AP8759 Locking C19 Power Cord, Rewireable End, 3 m
Locking C19 power cord with a rewireable supply end, limited to 16 A and 3 m long, for terminating to the outlet or connector your site already has.
Original price was: 130.02 SAR.122.22 SARCurrent price is: 122.22 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC AP8759 is a locking power cord with a C19 connector on one end and a rewireable termination on the other, and that open supply end is what sets it apart within APC’s rack power accessories. Instead of arriving with a fixed plug, it leaves the supply side free so a qualified electrician can fit the plug or terminal that matches the site’s own outlet or distribution board. The C19 end locks into the matching inlet on the equipment, so the connection holds when cables are pulled during rack work. The cord has an input current limit of 16 A and runs 3 m, enough to reach from a rack PDU or UPS to a wall or underfloor feed without an extension lead. Where the local socket type does not match a factory-fitted plug, the APC AP8759 removes the need for adaptors in the power path.
What the APC AP8759 does in practice
The C19 is the larger connector in the IEC family, used on high-draw rack equipment such as PDUs, UPS units, server chassis and storage shelves. A plain friction-fit connection can work loose when a technician slides a server out on its rails or reroutes a bundle behind the rack; the locking mechanism on this cord keeps the connector seated until it is released deliberately. On the other end, the rewireable termination means the cord is finished on site. The electrician strips the conductors and connects them to the plug, connector or terminal block chosen for the feed, and the 16 A input current limit then sets the ceiling for the load the cord may carry.
Where it fits in Saudi facilities
Server rooms, telecom shelters and control rooms across the Kingdom are often fitted out by contractors who meet different socket types from one building to the next, especially in government buildings, hospitals and industrial plants that were extended in phases. A rewireable cord suits these sites because the electrician terminates it to the outlet that is already there instead of adding an adaptor. Typical uses include feeding a PDU with a C20 inlet, such as the AP9559, in a security control room that runs CCTV recorders and access control servers; powering network equipment in a school or municipal communications room; or supplying an equipment rack on an industrial site where the feed is an industrial connector that does not accept standard plugs.
Choosing between the AP8759 and the AP8760
Both cords share the locking C19 end and the same length class; the difference is the supply end. The AP8760 ends in an IEC 60320 C20 plug, so it connects equipment to a C19 outlet on a PDU or UPS with no wiring at all. The AP8759 is the choice when the supply point is not a C19 outlet: a wall socket, an industrial connector or a terminal that the electrician will match on site. If the rack already has a PDU with C19 outlets, such as the metered AP8853, the AP8760 is usually the simpler order; if the cord has to reach the building’s own supply, the AP8759 is the one to specify.
Deployment notes
The rewireable end must be terminated by a qualified electrician, and the plug or connector fitted to it should be rated for at least 16 A, with circuit protection sized to match. Measure the route before ordering: at 3 m the cord spans the distance from a rack to a nearby wall or underfloor outlet, while long runs across a room are better solved by moving the supply point than by extending the cord. Leave enough slack at the C19 end so the locked connector is not under constant strain. The cord is covered by a 24-month warranty.
Package Contents
- Locking C19 to rewireable power cord
Technical Specifications
- Brand
- APC
- Warranty
- 2 Years
- Model
- AP8759
Frequently Asked Questions
What connectors does the APC AP8759 have?
A locking C19 connector on one end and a rewireable end on the other, which an electrician terminates on site with the plug or connector the supply point needs.
What is the current limit of the AP8759?
The cord has an input current limit of 16 A, so the plug fitted to its rewireable end should be rated for at least that value.
How long is the cord?
It is 3 m long, enough to reach from a rack to a nearby wall or underfloor outlet.
When should I choose the AP8760 instead?
When the supply point is a C19 outlet on a PDU or UPS. The AP8760 has a factory-fitted IEC 60320 C20 plug and needs no wiring on site.
What warranty does it carry?
The cord is covered by a 24-month warranty.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRV10KRILRK Online UPS with Rack Rails
On backorder
APC SRV10KRIL Online UPS Extended Runtime
On backorder
APC SMV2000AI Line Interactive UPS with IEC Outlets
On backorder
APC SMT2200RMI2UNC Smart-UPS 2200VA 2U with Network Card
On backorder





Reviews
There are no reviews yet.