APC APCRBC142 2-Block 9Ah UPS Replacement Battery
A 9 Ah lead-acid replacement cartridge for APC UPS units, supplied as a pre-linked 2-block string with every connector it needs and a 2-year repair-or-replace warranty.
Original price was: 470.08 SAR.441.88 SARCurrent price is: 441.88 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC APCRBC142 is a lead-acid replacement UPS battery cartridge that arrives as a 2-block string rated 9 Ah, pre-assembled into a single cartridge. That is its practical difference within APC’s battery range: a UPS that runs on two battery blocks does not need two loose batteries ordered, matched and wired by hand, because one APCRBC142 is the complete replacement for that UPS. For an operations or IT manager it is the middle path between a single small battery and a large high-voltage string: one part number, one delivery, one swap. The box carries all required connectors, an installation guide, a battery recycling guide and reusable packaging, and APC covers the cartridge with a 2-year repair-or-replace warranty. Before ordering, confirm that your UPS documentation names the APCRBC142.
What a 2-block cartridge means in practice
Inside a UPS, batteries are wired as a string so their voltages add up to the battery bus the UPS expects. When that string is made of separate blocks, they age together, and replacing only one of them leaves a fresh block paired with a tired one, which shortens the life of both. The APCRBC142 sidesteps that problem because both blocks are new, come from the same cartridge and are already linked. The 9 Ah rating describes the charge the string can deliver; how many minutes that becomes depends on the load the UPS carries at the moment mains power fails. A UPS feeding a couple of switches and a recorder will hold out much longer on the same cartridge than one carrying a busy server.
The APC APCRBC142 on Saudi sites
Telecom and network closets in office towers in Riyadh, Jeddah and the Eastern Province commonly sit on mid-sized UPS units, and when their batteries fade, the first symptom is often a switch rebooting during a short dip. A fresh APCRBC142 restores the ride-through those closets need until the building generator takes over. Residential compounds and hotels rely on similar UPS units behind CCTV recorders, gate barriers and front-desk systems, where a reboot means lost footage or a queue at reception. Warehouses and logistics yards use them for barcode stations and wireless controllers. In each case the facility team can plan replacements by part number and complete the swap during a routine maintenance visit.
How it sits beside its siblings
The APCRBC141 in this range is a single-battery cartridge for small UPS units, while the APCRBC143 is a much longer multi-block string for high-voltage UPS systems; the APCRBC142 sits between them. Elsewhere in the family, the RBC17 is listed at 12 V, 9 Ah and the RBC34 at 6 V, 9 Ah, the same capacity class in different configurations, and neither substitutes for the APCRBC142 unless your UPS documentation says so. Choosing among them is not a matter of preference: the UPS determines the cartridge, and the part number in your UPS manual or on its battery notice decides it.
Deployment notes
Everything needed to connect the cartridge is in the box: all required connectors and an installation guide that sets out the order of the work. Read the guide before opening the UPS, schedule the swap for a time when the protected equipment can run without backup for a short period, and let the UPS charge the new string fully before counting on it. Keep the reusable packaging, since it gives the spent cartridge a proper container for transport, and the battery recycling guide explains how to dispose of it responsibly rather than sending lead-acid batteries into general waste.
Package Contents
- All required connectors
- Battery recycling guide
- Installation guide
- Reusable packaging
Technical Specifications
- Brand
- APC
- Battery Details
- Lead-acid
- Model
- APCRBC142
Frequently Asked Questions
What is the capacity of the APC APCRBC142?
It is rated 9 Ah, delivered by a lead-acid string of 2 blocks assembled into one cartridge.
How many cartridges does a UPS need?
One. A single APCRBC142 is the complete replacement, so there is no second unit to order alongside it.
Do I need extra parts to install it?
No. All required connectors and an installation guide are in the box, together with a battery recycling guide and reusable packaging.
What warranty applies to the APCRBC142?
APC covers it with a 2-year repair-or-replace warranty.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRVL2KRIRK Online UPS 2000VA Lithium-ion
On backorder
APC BVX2200LI Tower UPS 2200 VA
On backorder
APC SRT1000RMXLI 1000VA Online Smart-UPS, 2U Rackmount
On backorder
APC SMT1500RMI2UC Smart-UPS 1500VA 2U Rack SmartConnect
On backorder





Reviews
There are no reviews yet.