Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandAPC

APC PDM3516IEC-260 Power Distribution Module

A 16 A power distribution module with a 260 cm output cable and one IEC 309 outlet. It combines circuit monitoring, automatic module detection and a three-pole breaker.

ModelPDM3516IEC-260Power16 A

Original price was: 2,690.43 SAR.Current price is: 2,529.00 SAR. excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order5 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

APC PDM3516IEC-260 puts a 260 cm output cable at the centre of the selection decision. Choose it by matching that cable to a defined equipment route, then confirming the electrical connection and available installation space. The module carries a 16 A rating and has a single IEC 309 outlet, with circuit monitoring and automatic detection by the Modular PDU. For a facilities manager coordinating a local distribution connection, the practical aim is a cable run that reaches the intended equipment without complicating access around it. This model gives the project team a specific cable length, body size and current limit to work into that plan before procurement becomes an installation task.

APC PDM3516IEC-260 for a measured equipment route

Start with the position of the distribution equipment and the location of the receiving connection. Trace the route the cable will actually follow, including the approach to each end. Compare that route with the 260 cm output cable rather than relying on the direct separation between the equipment. This approach is useful when a connection looks close on a floor plan but the cable must follow the site’s chosen routing arrangement around other equipment.

A defined route also helps the operations team retain access after commissioning. Decide where the cable will run and where nearby equipment needs service clearance before the module arrives. When the route fits this cable length, the purchase can be tied to a specific destination. Keep that destination on the work order so the installer can distinguish this connection from other power distribution work taking place in the same room.

Electrical requirements and the outlet interface

The module accepts a 400 V three-phase input at 50 Hz. It has a maximum current draw of 16 A and a maximum line current of 16 A. These are the electrical limits to review against the proposed circuit and connected load. Have the project electrician assess the supply and intended equipment together, so that the choice reflects the complete distribution arrangement. Treat the current rating as part of the circuit design, alongside the cable route and connection details.

The outlet is a single IEC 309 16 A connection. Confirm the receiving interface during equipment coordination and identify it clearly in procurement documents. This matters when the contractor preparing the power connection is different from the supplier delivering the receiving equipment. The module includes one three-pole breaker; show its place in the circuit documentation used for commissioning and later maintenance, together with the destination served by the output cable.

Operational identification and physical fit

Circuit monitoring makes the module relevant to the facilities team’s ongoing review of its distribution circuit. Automatic detection by the Modular PDU supports identification within that arrangement. During handover, associate the physical module with its assigned circuit and equipment destination. Staff taking over the room can then relate the installed connection to the project documentation when assessing a change in equipment placement or planning work around the distribution system.

The grey body is 15.2 cm high, 43.2 cm wide and 40.6 cm deep. Net weight is 1.79 kg. Use these figures to check the proposed position and plan handling during installation. The body location and cable path should be reviewed together: a suitable destination for the cable does not automatically establish a suitable place for the module. Confirm both as part of the room layout before scheduling the connection work.

Model selection for Saudi facilities

Include PDM3516IEC-1040 and PDM3516IEC-320 in the purchasing review when the project calls for an APC power distribution module. Select the exact reference against the assigned route rather than treating the model suffix as an incidental ordering detail. AP6003A and AP6120A also appear in the broader APC distribution family; keep their references separate in the equipment schedule so procurement follows the planned distribution architecture.

For a Saudi office equipment room, facilities control area or data infrastructure project, the useful fit test is the combination of supply, outlet and cable route. Coordinate these points with the electrical contractor and the team placing the equipment. Use the installation guide when preparing the work, and retain the 12-month warranty details with the purchasing handover. A clear model reference and a documented destination make future replacement planning easier to relate to the original installation.

Package Contents

  • Installation guide

Technical Specifications

Brand
APC
Warranty
1 Year
Model
PDM3516IEC-260
Power
16 A

Frequently Asked Questions

How long is the output cable?

The output cable is 260 cm long. Check the full routed distance between the module and the intended connection before ordering.

What are the input and current ratings?

The input is 400 V three-phase at 50 Hz. Maximum line current and maximum current draw are each 16 A.

What space does the module require?

The body measures 15.2 cm in height, 43.2 cm in width and 40.6 cm in depth. Net weight is 1.79 kg.

What monitoring and protection features are present?

The module has circuit monitoring, automatic detection by the Modular PDU and one three-pole breaker. Its outlet is IEC 309, rated at 16 A.

Brand
APC

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

APC

APC APDU9959NA3 Switched Rack PDU, 20A 208V, L620 Cord

Model APDU9959NA3
0U24208V
Original price was: 6,000.96 SAR.Current price is: 5,640.90 SAR. excl. VAT Save 360.06 SAR

On backorder

Request a Quote
APC

APC AP7820B Metered Rack PDU, 1U, 8 x C13 Outlets

Model AP7820B
2 Years1U208V
Original price was: 2,025.32 SAR.Current price is: 1,903.80 SAR. excl. VAT Save 121.52 SAR

On backorder

Request a Quote
APC

APC EPDU1116S Switched Rack PDU 16A, 20 C13 and 4 C19

Model EPDU1116S
0U16 A3.7kW
Original price was: 3,695.59 SAR.Current price is: 3,473.85 SAR. excl. VAT Save 221.74 SAR

On backorder

Request a Quote
APC

APC AP7822B Metered Rack PDU, 32A, 2U, C13 and C19

Model AP7822B
2 YearsRack-mounted200 V
Original price was: 3,725.60 SAR.Current price is: 3,502.06 SAR. excl. VAT Save 223.54 SAR

On backorder

Request a Quote

Original price was: 2,690.43 SAR.Current price is: 2,529.00 SAR. excl. VAT