APC PDM3516IEC-920 Power Distribution Module, 920 cm
IT power distribution module with a 400 V three-phase input, a 16 A current limit and a 920 cm output cable. An IEC 309 outlet and a three-pole breaker define the connection and protection requirements.
Original price was: 3,030.48 SAR.2,848.65 SARCurrent price is: 2,848.65 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC PDM3516IEC-920 is an IT power distribution module for projects where the cable route is a central purchasing decision. Its 920 cm output cable gives the installation team a specific length to compare against the planned path between the distribution point and the receiving equipment. A 400 V three-phase input and a 16 A current limit establish the electrical requirements, while an IEC 309 outlet defines the connection to check downstream. For a facilities buyer, the practical question is whether that combination fits the intended circuit and route. Select it around the installation drawing and load plan, with commercial comparisons following the actual requirements of the job.
Where APC PDM3516IEC-920 fits
This module distributes power for IT equipment through a single IEC 309 outlet rated at 16 A. Treat that connector as an explicit matching requirement when reviewing the receiving equipment. A connection that looks broadly similar is not sufficient grounds for specifying an interchangeable part. Put the outlet type beside the destination on the project drawing so that procurement and the installation contractor work from the same connection plan.
Plan the circuit around the current limit
Both the maximum line current and maximum current draw are 16 A. The module includes a three-pole breaker rated at 16 A, giving the electrical team a defined protection component to consider alongside the upstream circuit. Review the intended load against these limits before commissioning. Its network frequency is 50 Hz, so the incoming supply review should cover frequency as well as voltage and phase arrangement. These checks belong to the electrical design rather than a decision based solely on cable reach.
Use the cable length in the site layout
Measure the actual route for the 920 cm output cable, including turns and the approach to the connection point. This is more useful than measuring only the direct distance across a room. Mark where the cable will enter and leave the equipment area before the purchase is approved. In Saudi enterprise server rooms, hospital IT facilities and university data spaces, the module can be assessed for IT power distribution where the site’s electrical arrangement meets its requirements.
Position within the product family
When reviewing PDM3516IEC-980 alongside this model, keep the complete part numbers on the comparison sheet and check each choice against the intended route. PDX332IEC-600 serves as a power distribution cable extender, making its role different from the distribution module considered here. Establish whether the project needs a distribution module or a cable extension before deciding between family members. That distinction gives the purchasing team a functional basis for selection without treating related model names as proof of interchangeability.
Prepare a clear installation handover
The grey module carries a one-year warranty. Record its full model identity against the destination circuit and retain the route drawing with the installation handover. Ask the electrical contractor to confirm the supply, outlet match and planned load together, rather than approving each in isolation. This helps keep the specified component aligned with the equipment it will serve.
Before the equipment area is rearranged, revisit the cable path and connection location on that drawing. Keeping a clear association between the module, its outlet and the receiving equipment makes subsequent facilities reviews more straightforward. For a repeat deployment, use the complete model reference and the new site’s route measurements instead of copying a previous order without checking the layout.
Package Contents
- Power distribution module
- Installation guide
Technical Specifications
- Brand
- APC
- Warranty
- 1 Year
- Model
- PDM3516IEC-920
Frequently Asked Questions
How long is the output cable?
The output cable is 920 cm long. Check it against the actual installation route, including turns and the connection approach.
What supply does the module require?
The input is 400 V three-phase at 50 Hz. Maximum line current and maximum current draw are both 16 A.
Which outlet and breaker are fitted?
The module has one IEC 309 16 A outlet and a three-pole breaker rated at 16 A.
What is the warranty period?
The warranty period is one year.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC APDU9953 Switched Rack PDU, 32A 230V, 21 C13 + 3 C19
On backorder
APC APDU9959NA3 Switched Rack PDU, 20A 208V, L620 Cord
On backorder
APC AP7922B Switched Rack PDU, 32 A, 2U, 16 C13 Outlets
On backorder
APC AP7155B In-Line Current Meter, 32A 230V, IEC309 Plug
On backorder





Reviews
There are no reviews yet.