APC SBP10KRMI4U Bypass Panel, 100 A, 8 C13 and 2 C19
A 230 V, 100 A service bypass panel with a hardwired input and 8 C13 plus 2 C19 output sockets, keeping rack equipment powered while the UPS is serviced or replaced.
Original price was: 7,276.16 SAR.6,839.59 SARCurrent price is: 6,839.59 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC SBP10KRMI4U is a service bypass panel built for the point where a UPS meets its loads. Rated at 230 V and 100 A, it takes a hardwired feed on the input side and delivers power through 8 C13 and 2 C19 sockets on the output side. That outlet arrangement is what sets it apart within this group of APC bypass panels: instead of feeding a separate outlet strip, rack equipment plugs straight into the panel, so the bypass switch and the power distribution live in one unit. When the UPS needs servicing or replacement, the operator moves the load onto the utility path at the panel and keeps servers, network switches and storage running while the UPS is isolated. Rack mounting brackets come in the box, so the panel sits in the same cabinet as the equipment it feeds.
How the APC SBP10KRMI4U works in practice
A bypass panel exists for one specific moment: when the UPS has to come out of the power path. Without one, swapping a battery module or replacing the UPS means shutting down every load behind it. With the SBP10KRMI4U in place, the incoming supply is hardwired into the panel and the protected equipment draws from the panel’s own sockets. Switching to bypass sends utility power straight to those sockets, so the UPS can be de-energised, removed and brought back without unplugging a single server. The 100 A rating leaves headroom for a well-populated cabinet, and the mix of C13 and C19 sockets matches the power inlets used on typical servers and network gear as well as higher-draw equipment such as storage arrays.
Where it fits on Saudi sites
Data rooms in Riyadh and Jeddah, bank branch server cabinets, hospital IT rooms and the network cores of government buildings all run to uptime targets that leave no room for a planned shutdown just to service a UPS. The SBP10KRMI4U suits these sites because the maintenance contractor can work on the UPS during business hours while the cabinet stays live. It fits equally well in CCTV and access-control head-end racks in malls and industrial plants, where recording servers and NVRs must keep running through every maintenance visit, and in telecom rooms where switches and routers draw from C13 sockets.
SBP10KRMI4U compared with the SBP16KRMI4U and SBP3000
All three panels do the same job and differ in how they connect and how much load they carry. Choose the SBP10KRMI4U when equipment should plug directly into the bypass panel through IEC sockets. The SBP16KRMI4U is its rack-mount companion in the same line and also ships with rack mounting brackets. The SBP3000 is the lighter option in the group, with a lower current rating, a wider voltage rating, hardwired input and output, and break-before-make transfer. If the cabinet already has its own power distribution units and the load is smaller, compare the SBP3000; if the equipment will be fed straight from the panel, the SBP10KRMI4U removes a whole layer of distribution.
Installation notes
Because the input is hardwired, a qualified electrician must terminate the supply at the panel and size the upstream cabling and protection for a 100 A rating. Plan the outlet allocation before installation: the C13 sockets for servers and network equipment, the C19 sockets for the highest-draw devices. Fix the panel in the rack with the supplied brackets, follow the installation guide and user manual for the switching sequence between UPS and bypass, and post a clear procedure card on the cabinet so every technician follows the same steps.
Package Contents
- Installation guide
- Rack mounting brackets
- User manual
Technical Specifications
- Brand
- APC
- Model
- SBP10KRMI4U
Frequently Asked Questions
What outlets does the APC SBP10KRMI4U provide?
Power leaves the panel through 8 C13 and 2 C19 sockets built into it, while the input is a hardwired connection.
What are the electrical ratings of the SBP10KRMI4U?
The panel is rated at 230 V and 100 A.
Do connected devices stay powered while the UPS is serviced?
Yes. Switching to bypass feeds utility power straight to the panel's sockets, so the UPS can be isolated, serviced or replaced without disconnecting the equipment.
What comes in the SBP10KRMI4U box?
The panel ships with an installation guide, rack mounting brackets and a user manual.
How does the SBP10KRMI4U differ from the SBP3000?
The SBP3000 has a lower current rating, a wider voltage rating and a hardwired output, while the SBP10KRMI4U distributes power through built-in IEC sockets that equipment plugs into directly.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRV10KRIRK Online Rack UPS 10 kVA
On backorder
APC SMV2000AI Line Interactive UPS with IEC Outlets
On backorder
APC SRV1KI Online Tower UPS 1000 VA
On backorder
APC SRVL2KRIRK Online UPS 2000VA Lithium-ion
On backorder





Reviews
There are no reviews yet.