APC SMT2200IC Smart-UPS 2200VA 1980W Tower UPS
Tower Smart-UPS rated 2200VA with 1980W of output, line-interactive with AVR, offering 8 IEC C13 and 2 IEC C19 outlets, an LCD and a SmartConnect port for cloud monitoring.
Original price was: 4,190.95 SAR.3,939.49 SARCurrent price is: 3,939.49 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC SMT2200IC is the Smart-UPS in this group that stands apart on output: it delivers 1980W from a 2200VA rating, in a tower chassis that stands on the floor beside the equipment rather than inside a rack. That headroom is the reason to choose it. A unit of this output suits loads such as a densely populated network cabinet, a server, or a surveillance recording system with its storage, while leaving margin for growth. The design is line-interactive with automatic voltage regulation (AVR), runs on a 230V supply, and provides 8 IEC C13 outlets plus 2 IEC C19 outlets, so heavier devices with C19 inlets plug in directly. An LCD shows status at the unit, a SmartConnect port links it to the APC cloud monitoring service, and a SmartSlot leaves room for an optional APC accessory card.
What line-interactive with AVR means for the APC SMT2200IC
In a line-interactive UPS, the connected load runs from regulated mains power while the battery stays on standby. When the incoming voltage drifts high or low, the AVR stage corrects it without drawing on the battery, which keeps the battery for genuine outages and reduces the number of discharge cycles it goes through. When the supply fails completely, the unit transfers the load to battery so the equipment rides through or shuts down in order. For sites where the grid is stable most of the time but sags at peak demand, such as summer afternoons when air-conditioning load climbs, this approach strikes a sensible balance between protection and cost without stepping up to an online double-conversion design.
Outlets and connectivity in practice
The outlet mix shapes what this unit can serve. The C13 bank takes the standard IEC cords that ship with switches, routers, NVRs and most servers. The C19 pair serves higher-current equipment such as larger servers, storage arrays or a rack PDU, which lets one UPS feed a whole cabinet through a single distribution strip. On the management side, the LCD lets a technician read the unit’s state during a site round, and the SmartConnect port reports status and alerts to the cloud so a central team can watch it remotely. The SmartSlot accepts an optional APC card when the site needs a different management interface. A USB cable ships in the box for the local link to the server that handles orderly shutdown.
Saudi sectors where the APC SMT2200IC fits
Tower format and high output make this unit a match for rooms without a rack, or with a rack that is already full. Typical cases include the IT room of a mid-sized company in Riyadh where servers stand on the floor, the security office of a residential compound where the CCTV recorder, storage and access-control controller share one desk, a clinic or pharmacy chain that keeps its point-of-sale server and network gear in a back office, and the site office of an industrial or construction project in the Eastern Province where supply quality varies. In each case, AVR handles everyday voltage swings and SmartConnect keeps head office informed.
Choosing the SMT2200IC over its siblings
Within the family, the SMT2200IC is the step for loads that have outgrown a smaller tower. The SMC2000I, listed at 1300 W, suits lighter loads at a lower cost, while the SMT2200IC with its 1980W output covers a heavier cabinet. If the installation calls for a rack chassis rather than a tower, compare the family’s rackmount models, such as the SMTL2200RMI2UC, which is also listed at 1980 W. Against the rack-mounted SMT1500RMI2UC, which is rated 1500VA, the SMT2200IC trades rack mounting for higher capacity in a floor-standing chassis.
Deployment notes
Place the tower where air can circulate around it and where the outlets and LCD are easy to reach; a ventilated corner of the equipment room is better than a closed cupboard. Bring the 230V feed from a circuit sized for the full load, and plan the outlet map so the heaviest devices go on the C19 outlets and everything else on the C13 bank. Connect the supplied USB cable to the server that will run shutdown, link the SmartConnect port to the site network so the unit can reach the cloud, and leave the SmartSlot free for a management card if the site’s IT policy calls for one later.
Package Contents
- USB cable
Technical Specifications
- Brand
- APC
- Display
- LCD
- Model
- SMT2200IC
- Mounting
- Tower
- Power
- 1980W
- Ups Power
- 2200VA
Frequently Asked Questions
What output does the APC SMT2200IC deliver?
It is rated 2200VA with 1980W of output and runs on a 230V supply.
Which outlets does it provide?
It offers 8 IEC C13 outlets for standard equipment and 2 IEC C19 outlets for higher-current devices such as larger servers or a rack PDU.
What does AVR do on this model?
The unit is line-interactive, and its automatic voltage regulation corrects high or low input voltage without drawing on the battery, keeping the battery for real outages.
How is the unit monitored and managed?
An LCD shows status at the unit, the SmartConnect port reports to the APC cloud monitoring service, the SmartSlot accepts an optional APC card, and a USB cable ships in the box for the server link.
Can the APC SMT2200IC be mounted in a rack?
No, it is a floor-standing tower unit. Sites that need a rack chassis should compare the family's rackmount models, such as the SMTL2200RMI2UC.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SMT2200RMI2UNC Smart-UPS 2200VA 2U with Network Card
On backorder
APC SRVL2KRIRK Online UPS 2000VA Lithium-ion
On backorder
APC BVX2200LI Tower UPS 2200 VA
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder





Reviews
There are no reviews yet.