APC SMTL750RMI2UC Lithium-ion Smart-UPS 600W 2U Rack
A 750VA / 600W line-interactive Smart-UPS with a lithium-ion battery and pure sine wave output, built as a 2U rackmount unit for small critical loads.
Original price was: 3,672.31 SAR.3,451.97 SARCurrent price is: 3,451.97 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC SMTL750RMI2UC is the smallest rack model on this part of the Smart-UPS list: a 750VA, 600W line-interactive unit in a 2U rackmount chassis, sized for the short list of devices in a cabinet that must not lose power. Its 600W real-power rating is the figure to plan around. It suits a single network cabinet, a camera recorder with its switch, or an access control panel with its controller, rather than a full row of servers. Output is a pure sine wave, so equipment with active power-factor-corrected supplies receives the same clean waveform it expects from the mains. The battery is lithium-ion, and the whole unit occupies two rack units, leaving the rest of a short cabinet for patch panels and switching. For a buyer who knows the protected load sits comfortably under 600W, this is the model to put on the order.
How APC SMTL750RMI2UC behaves in daily operation
Line-interactive topology means the unit stays in line with the mains and corrects ordinary swings in supply voltage without drawing on the battery, then transfers the load to battery when the supply fails or drifts beyond what it can correct. In practice the battery is kept for real outages, which is what a site with frequent brief dips needs. During those outages the inverter delivers a pure sine wave, so switches, recorders and small servers never see the stepped waveform that simpler units produce.
Lithium-ion chemistry is lighter than a lead-acid pack of comparable energy and is generally selected for a longer service life between replacements, which means fewer scheduled battery swaps in a busy rack. Combined with the 2U rackmount format, the unit is installed beside the equipment it protects instead of standing on the floor next to the cabinet.
Saudi sites where it fits
A bank branch in Riyadh with one network cabinet, a pharmacy store running point-of-sale terminals and a router, a compound guardhouse in Jeddah holding an NVR and the gate access controller, or a school server corner in Dammam: each has a protected load that can be listed, totalled and confirmed under 600W, and a rack with little free space. At remote sites where a technician visit costs a day of travel, fewer battery replacements are a practical reason to choose a lithium-ion unit.
Choosing between SMTL750RMI2UC and the larger SMTL models
The SMTL siblings step up in output. The SMTL1000RMI2UC is rated at 800 W and is the next step when the load list edges past the 600W of this unit. The SMTL1500RMI3UC is rated at 1350 W, the SMTL2200RMI2UC at 1980 W, and the SMTL3000RMI2UC at 2700 W for cabinets with several servers or storage arrays. SMTL750RMI2UC is the right call when the protected load is known, small and unlikely to grow much. If an expansion phase is already planned, ordering the SMTL1000RMI2UC now avoids replacing the UPS later.
Deployment notes
Total the nameplate or measured draw of every device that will plug into the unit, and keep a margin below 600W so that a later addition does not push it into overload. Reserve two free rack units at a height where the unit can be reached for service. Before go-live, cut the mains feed to the unit in a planned test with the real load connected, and confirm that the equipment stays up on battery. Then record the connected devices on the rack label so the next technician knows exactly what the UPS is carrying.
Technical Specifications
- Brand
- APC
- Battery Details
- Lithium-ion
- Model
- SMTL750RMI2UC
- Mounting
- 2U rackmount
- Power
- 600W
- Ups Power
- 750VA
Frequently Asked Questions
What load can APC SMTL750RMI2UC carry?
It is rated at 750VA and 600W. Plan the total real power of the connected equipment below 600W and keep a margin for later additions.
What output waveform does it deliver on battery?
A pure sine wave, which suits switches, recorders and servers with power-factor-corrected supplies.
What battery does SMTL750RMI2UC use?
A lithium-ion battery.
How much rack space does it need?
It is a 2U rackmount unit, so reserve two rack units in the cabinet.
Which model should I choose if my load is above 600W?
Step up to the SMTL1000RMI2UC, which is rated at 800 W, or to a larger SMTL model for heavier cabinets.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SMV2000AI Line Interactive UPS with IEC Outlets
On backorder
APC SMT2200RMI2UNC Smart-UPS 2200VA 2U with Network Card
On backorder
APC SRV6KIL Tower UPS 6 kVA External Battery
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder





Reviews
There are no reviews yet.