APC SRT3000XLI Smart-UPS 3 kVA Tower, 8 C13 + 2 C19
A free-standing 3 kVA / 2.7 kW Smart-UPS tower with 8 x C13 and 2 x C19 outlets at 230 V output and a SmartSlot expansion slot.
Original price was: 9,330.54 SAR.8,770.71 SARCurrent price is: 8,770.71 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC SRT3000XLI is the tower-format Smart-UPS at 3 kVA and 2.7 kW, aimed at sites that need real capacity but have no rack cabinet to put it in. It stands on the floor beside the equipment it protects and feeds it through 8 x C13 and 2 x C19 outlets at a 230 V output. That balance defines its place in the family: a clear capacity step above the lighter units, without the cost and installation work of the largest models, and without the rails and cabinet space a rackmount version demands. For a Saudi buyer equipping a server corner, a control room desk or a security room with no cabinet, it is a self-contained unit that is placed, cabled and commissioned where the load already sits, provided the connected equipment totals within its rating.
Outlet layout of APC SRT3000XLI
The C13 outlets take the standard IEC cords used by switches, NVRs, workstations and most smaller servers. The C19 outlets are for higher-draw equipment such as a larger server or a power distribution strip feeding several devices. Draw up the cord list before installation so each device lands on the right outlet type, and confirm that every connected device accepts a 230 V supply.
Keeping the load within 2.7 kW
Add the real power of every connected device from its nameplate, keep the total below 2.7 kW and the apparent power below 3 kVA, and leave a margin for expansion. A load sitting near the ceiling leaves no room for the next recorder or switch. When the mains supply drops, the unit carries the load so equipment either rides through the event or shuts down in order.
Management through the SmartSlot
The unit carries a SmartSlot expansion slot that accepts an accessory card whenever the site wants to add management or interface options later. Out of the box, the USB cable and the console cable connect it to a host server or a configuration terminal, the Network Management Utility CD and the User Documentation CD support setup, and the temperature sensor probe reports conditions around the unit.
Where it works in Saudi facilities
Small server rooms in schools and clinics, the IT corner of a government branch office, the monitoring desk of a security control room, and the communications room of a villa compound or hotel are typical sites. In each, a cabinet either does not exist or is already full, and a free-standing unit can sit beside the equipment with its cords routed directly to the loads.
SRT3000XLI or another family member?
SRT3000RMXLI-NC holds the same 2.7 kW rating in a rackmount body, so choose it when the equipment lives in a cabinet. SRT2200XLI is the lighter option at 1980 W. SRT5KXLI steps up in capacity for a room with heavier equipment. SRT3000XLI remains the pick when the load fits within 2.7 kW and the unit will stand on the floor.
Installation notes
Place the tower on a level floor position with clear ventilation and fit the stabilizer brackets with the flat head screws so it cannot tip. Attach the strain relief to keep cords secure, use the supplied output power cords to reach the nearest loads, wire the EPO terminal block into the building’s emergency power-off circuit where one exists, and clip on the front bezel once cabling is finished. Run the USB cable to the server that will manage shutdowns and position the temperature probe where it reflects the air around the equipment.
Package Contents
- Front bezel
- Console to DB9 cable
- USB cable
- EPO terminal block
- Temperature sensor probe
- User Documentation CD
- Network Management Utility CD
- Strain relief
- Pair of stabilizer brackets × 2
- Flat head screws × 4
- Output power cords (1.2 m and 2 m) × 2
Technical Specifications
- Brand
- APC
- Model
- SRT3000XLI
- Mounting
- Tower
- Power
- 2.7 kW
- Ups Power
- 3 kVA
Frequently Asked Questions
What outlets does APC SRT3000XLI provide?
It has 8 x C13 and 2 x C19 outlets, with a 230 V output.
What load can it carry?
It is rated at 3 kVA and 2.7 kW. Keep the real power of all connected devices below 2.7 kW with a margin for growth.
Can it be installed in a rack?
SRT3000XLI is a tower unit for floor placement. For a rack cabinet, SRT3000RMXLI-NC is the rackmount model with the same 2.7 kW rating.
Can a management card be added later?
Yes. It carries a SmartSlot expansion slot for an accessory card.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SMX3000RMHV2U 3 kVA Smart-UPS, Rack/Tower Convertible
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder
APC SRVL2KRIRK Online UPS 2000VA Lithium-ion
On backorder
APC BVX2200LI Tower UPS 2200 VA
On backorder





Reviews
There are no reviews yet.