APC SRTG6KXLI 6kVA Smart-UPS, Rack/Tower with Network Card
6kVA Smart-UPS with 230V output, two C13 and one C19 sockets plus hardwire terminals, and a network card. Converts between rack and tower placement.
Original price was: 13,494.77 SAR.12,685.08 SARCurrent price is: 12,685.08 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC SRTG6KXLI is the 6kVA model in the Smart-UPS range, and it sits where many Saudi sites actually land when they size a protected load: above the compact units that guard a single rack, below the larger SRTG frames meant for a full equipment room. That middle position is the reason to pick it. You get a 230V output, a network card for monitoring over the LAN, and an outlet panel that combines two IEC C13 sockets and one IEC C19 socket with hardwire output terminals, so the unit can feed plug-in equipment and a fixed distribution circuit at the same time. The chassis converts between rack and tower placement, and the box carries both rack mounting brackets and stabilization feet, which means the decision about where it lives can wait for the site survey instead of being locked in on the purchase order.
What the APC SRTG6KXLI does in practice
A UPS of this class stands between the building supply and equipment that must not drop when the grid flickers or fails: core switches, servers, video recorders, access-control panels and the storage behind them. When the input is disturbed the unit holds its 230V output, giving the protected load time to ride through a short event or to shut down in order during a longer one.
The outlet arrangement shapes how you wire it. The two C13 sockets suit the standard power supplies in servers and switches, while the C19 socket takes the higher-current inlets used by large server chassis, storage arrays and rack power distribution units. The hardwire terminals are the real difference from plug-only models: an electrician can land a dedicated output circuit on them, so the UPS can feed a small protected sub-board serving a row of cabinets or an entire security control desk rather than individual devices.
The network card puts the UPS on the IP network, where the operations team can follow its status from the same desk that watches the rest of the site instead of walking to the equipment room. A USB cable and a network cable are also in the box for local connection and first-time setup.
Where it fits in Saudi facilities
In hospitals and medical centres, the 6kVA rating suits a departmental server cabinet or the network core of a single building, with the hardwire output feeding a protected sub-board for nurse-station terminals. Government and municipal offices use this class of unit for the communications room that carries telephony, access control and CCTV recording. In retail chains and banks, a regional branch hub or a cash-centre security room is the typical home, and in industrial and oil-and-gas support buildings in the Eastern Province the tower configuration lets it stand in a control room that has no rack at all.
Choosing between SRTG6KXLI and other SRTG models
Within the SRTG line, the SRTG5KXLI is the step down at 5kW and the SRTG8KXLI is the step up at 8kW, while the SRTG10KXLI and SRTG20KXLI move into whole-room territory. Choose the SRTG6KXLI when the measured load sits too close to the limit of the SRTG5KXLI to leave sensible headroom, yet would leave a large share of the SRTG8KXLI unused for years. If the protected equipment is a single rack of switches and a few servers, the smaller Smart-UPS models in the SRTL and SMTL lines are usually the more economical choice; if the load is already near this unit’s rating, move up a size rather than run it close to full.
Deployment notes
Decide early whether the hardwire output will be used, because that part of the job needs a qualified electrician and correctly rated input and output circuits, while the C13 and C19 sockets only need cords of the right gauge. For rack installation, use the supplied brackets and confirm the cabinet’s depth and weight rating before the unit arrives; for floor use, fit the stabilization feet so the unit stands firmly. Register the network card’s address with the IT team before commissioning so monitoring is live from day one, and keep the installation manual in the site file for the maintenance contractor.
Package Contents
- USB cable
- RJ45 cable
- Rack mounting brackets
- Stabilization/wall-mount feet
- Installation manual
- C13-C14 power cable
Technical Specifications
- Brand
- APC
- Model
- SRTG6KXLI
- Mounting
- Rack/Tower
- Ups Power
- 6kVA
Frequently Asked Questions
What output voltage does the APC SRTG6KXLI provide?
It delivers a 230V output, the standard supply voltage for server and communications rooms in Saudi Arabia.
Which outlets does it have?
Two IEC C13 sockets and one IEC C19 socket, plus hardwire output terminals for connecting a dedicated circuit or a protected sub-board.
Can it be installed in a rack?
Yes. The unit converts between rack and tower placement, and the box includes both rack mounting brackets and stabilization feet.
Can the unit be monitored remotely?
Yes. It comes with a network card that puts it on the IP network, so its status can be followed from the operations desk.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRT1000XLI Smart-UPS Tower UPS 1000 VA / 1000 W
On backorder
APC SRV1KI Online Tower UPS 1000 VA
On backorder
APC SRV10KRIRK Online Rack UPS 10 kVA
On backorder
APC SRV10KRIL Online UPS Extended Runtime
On backorder





Reviews
There are no reviews yet.