APC SRTL8KRM4UI On-Line Smart-UPS 8000VA Lithium-ion 4U
8000VA on-line Smart-UPS at 230V with a lithium-ion battery, a 4U rack/tower chassis and a network card. It offers C13 and C19 outlets and supports extended runtime.
Original price was: 35,206.01 SAR.33,093.65 SARCurrent price is: 33,093.65 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
APC SRTL8KRM4UI is an 8000VA on-line Smart-UPS for sites that want balanced coverage within the family: a substantial capacity rating in a chassis that still mounts in a standard rack or stands as a tower. It runs at 230V, uses a lithium-ion battery and occupies 4U when rack-mounted. A network card is fitted for monitoring over the LAN, and the unit supports extended runtime when a site needs longer backup. On the output side it offers 6 C13 and 4 C19 outlets plus 2 further C19 IEC outlets, so standard IT equipment and higher-current loads can both connect directly. For a Saudi facilities or IT manager, the decision comes down to three things: whether the load list fits 8000VA, where the unit will sit, and how the team will monitor it once it is live.
How APC SRTL8KRM4UI protects the load
In an on-line design the connected equipment is fed from the UPS output at all times rather than straight from the mains, so a mains failure does not produce a switchover at the load. For equipment that reacts badly to supply disturbances, such as storage arrays, core switches and video recorders writing continuously to disk, this is the main reason to specify an on-line unit. The 230V rating matches standard distribution in Saudi commercial buildings, which keeps the electrical design straightforward.
The network card turns the UPS into a monitored device on the site network. Operations staff can follow its status from their desks instead of walking to the rack, and the USB cable in the box offers a direct link to a single host as an alternative. The temperature sensor probe adds an environmental reading at the installation, useful in Saudi equipment rooms where summer heat and cooling faults are a standing risk. The EPO terminal block allows the UPS to be tied into the room’s emergency power off circuit, so an emergency stop also removes UPS output.
Saudi deployments
Typical sites include the main communications room of a hospital or university building, the central rack of a CCTV system covering a shopping centre or industrial plant, a branch data room for a bank or government entity, and the control room of a water, energy or logistics facility. In each, the mix of C13 and C19 outlets lets servers, switches, storage and rack power distribution connect without adapters, and the lithium-ion battery is one more point to confirm against the site’s maintenance plan. Where the safety design calls for emergency power off integration, the EPO terminal block covers it without additional parts.
Choosing SRTL8KRM4UI within the family
Within the SRTL line, SRTL5KRM2UI and SRTL5KRM2UI-HW are the nearby models; compare the rated capacity of each against your load list before settling on SRTL8KRM4UI. The packages also differ: SRTL8KRM4UI ships with cage nuts for securing the UPS to the rack, a front bezel, battery modules and a rail kit, while SRTL5KRM2UI lists a software and documentation CD and C13-C14 power cords instead. Choose SRTL8KRM4UI when 8000VA, on-line topology, a lithium-ion battery and a fitted network card are all on the specification. If the load list sits well below that rating, a lower-rated family member is likely to suit the budget better.
Deployment notes
Reserve 4U of rack space, or a floor position with service clearance if the unit will stand as a tower on its stabilizer brackets. The rail kit comes with its own instructions and hardware; the rack-mount brackets, cleats and their screws are in the box, and the cage nuts secure the UPS to the rack. Install the battery modules, fit the front bezel and wire the EPO terminal block before energising. Route the cables through the snap-in strain reliefs, position the temperature sensor probe where it reflects the equipment’s environment, and register the network card on the management network. If the site needs extended runtime, plan the additional capacity and the space it needs at the same time as the UPS itself, rather than after the rack is full.
Package Contents
- Front bezel
- EPO terminal block
- Temperature sensor probe
- USB cable
- Battery module × 2
- Pair of stabilizer brackets
- Flat-head screw for tower stabilizer brackets × 4
- Rail kit with instructions and hardware
- Snap-in strain relief × 2
- Pair of cleats
- Pan-head screw to secure cleat to UPS × 8
- Pair of rack-mount brackets
- Flat-head screw to secure rack-mount brackets to UPS × 8
- Ornamental screw to secure brackets to rails × 4
- Cage nut for securing UPS to rack × 2
Technical Specifications
- Brand
- APC
- Battery Details
- Lithium-ion
- Model
- SRTL8KRM4UI
- Mounting
- Rack/Tower 4U
- Ups Power
- 8000VA
Frequently Asked Questions
What are the capacity and voltage of APC SRTL8KRM4UI?
It is rated at 8000VA and operates at 230V.
Which topology does it use?
It is an on-line UPS, so the connected equipment is fed from the UPS output continuously.
What outlets does it provide?
It provides 6 C13 and 4 C19 outlets plus 2 further C19 IEC outlets.
Can it be mounted in a rack or used as a tower?
Yes. It is a rack/tower unit occupying 4U, with a rail kit, rack-mount brackets and stabilizer brackets in the box.
Can it be monitored remotely?
Yes. A network card is fitted for monitoring over the network, and a USB cable is included for a direct host connection.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC SRVL2KRIRK Online UPS 2000VA Lithium-ion
On backorder
APC SRV6KIL Tower UPS 6 kVA External Battery
On backorder
APC SRV10KRIL Online UPS Extended Runtime
On backorder
APC BVX700LUI UPS with IEC Sockets
On backorder





Reviews
There are no reviews yet.