Grandstream GWN7801P Managed PoE+ Switch

The Grandstream GWN7801P is a managed Layer 2+ PoE switch shaped around a compact powered access layer with a 150 W integrated supply and flexible wall placement. Its access and management interfaces are 8 x Gigabit PoE RJ45; 1 x console, while 2 x 1G SFP gives the installation dedicated paths beyond the copper edge. Power delivery is specified as IEEE 802.3af/at; 8 PoE ports; up to 30 W per port, supported by a shared 120 W budget and 150 W integrated power supply. This profile helps a Saudi facilities or IT team place the model correctly before procurement: it is intended to aggregate powered network endpoints, apply managed access-layer control, and connect that edge toward the wider network. The choice is therefore driven by endpoint count, verified device draw, uplink requirements, and installation location rather than port count alone. Within the GWN7800 family, GWN7801P occupies a distinct capacity and power position instead of serving as an interchangeable chassis.

Grandstream GWN7801P in daily network operations

The GWN7801P provides Gigabit Ethernet at the access edge and uses 2 x 1G SFP for upstream connectivity. The GWN7801P switching engine is rated at 20 Gbps, with 10 Gbps of non-blocking throughput and a 14.88 Mpps forwarding rate. The GWN7801P average latency specification is Average less than 4 μs, and its packet buffer is 4.1 Mb. These values give an administrator concrete references when checking whether expected voice, wireless, security, and ordinary business traffic can share the chassis. The GWN7801P MAC address table is 8K, which informs planning for learned endpoints and network segmentation. The managed design means the switch belongs in an environment where addressing, traffic separation, access policy, monitoring, and change control are handled deliberately. A console port gives the team a local route for commissioning or recovery work.

PoE planning for connected devices

The GWN7801P supports IEEE 802.3af/at; 8 PoE ports; up to 30 W per port. The GWN7801P shared power allowance is 120 W, so the deployment worksheet should total actual device demand and reserve sensible operating headroom. A per-port ceiling describes what one compatible endpoint may request; it does not turn the total budget into an unlimited supply across every socket. For that reason, engineers should classify phones, cameras, access points, intercoms, and other powered equipment by their verified draw before assigning ports. The GWN7801P 150 W integrated power supply keeps the primary supply arrangement defined at the chassis level. This approach reduces dependence on individual injectors at endpoint locations, while preserving a clear need for circuit, grounding, heat, and backup-power planning in the communications space.

Use in Saudi commercial environments

The GWN7801P is well placed for a branch office, boutique, clinic reception area, small school zone, or isolated security cabinet. In such projects, centralized PoE can simplify maintenance because field devices return to a known managed cabinet instead of relying on scattered local adapters. The GWN7801P also helps operations teams document which port serves each room, camera view, desk group, or wireless coverage area. Where business continuity matters, upstream path design and electrical backup should reflect the importance of those connected services. The GWN7801P can support converged access, but voice, security, wireless, and user traffic still require an intentional logical design. Buyers should match the chassis to the number of live endpoints expected during the project period, not only the quantity installed on opening day.

How GWN7801P differs from related models

The GWN7801P should be compared with its siblings on powered-port density, supported PoE class, total power budget, and uplink format. Smaller models favor localized cabinets and lighter endpoint groups, while larger members consolidate more access connections. The PH variants are aimed at installations that need the higher IEEE 802.3bt power class; conventional P variants focus on IEEE 802.3af/at endpoints. The GWN7801P is therefore the better fit only when its own combination of access count and power delivery matches the device schedule. Avoid choosing a larger sibling solely for unused sockets, and avoid choosing a lower-power sibling if documented endpoints exceed its supported class. This product-family view keeps capital planning connected to actual site requirements.

Placement, cooling, and physical preparation

The GWN7801P supports Desktop, wall or rack installation. Its cooling arrangement is Fanless, which should guide placement around occupied areas and ventilation paths. The GWN7801P supports jumbo frames up to 10,240 bytes, a setting that should be enabled only where the complete traffic path and connected equipment are configured accordingly. Before fitting the unit, confirm cabinet dimensions, cable bend space, patch-panel layout, earth connection, power outlet, airflow, and access for maintenance. Labeling both ends of every copper and fiber run will make later moves and fault isolation easier. The package hardware should be matched to the selected mounting method, while the communications room remains responsible for suitable rack support, electrical protection, and environmental conditions.

Uplink and capacity decisions

The GWN7801P uplink provision is 2 x 1G SFP. The network designer should decide whether those interfaces will serve aggregation, separate service paths, or resilience, then choose compatible optics or cabling. The GWN7801P switching capacity of 20 Gbps should be considered alongside the 10 Gbps non-blocking figure rather than evaluated in isolation. The 14.88 Mpps forwarding specification provides another reference for packet-intensive workloads. If several powered devices generate sustained traffic together, upstream design must keep the edge from converging onto an undersized path. The GWN7801P can be introduced into a new build or a staged refresh, provided port migration, addressing, power sequencing, and rollback are documented before the cutover.

Procurement checklist

Before ordering the GWN7801P, count required copper endpoints, identify every powered-device class, calculate the 120 W PoE load, and reserve ports for realistic expansion. Confirm that 2 x 1G SFP suits the aggregation equipment already selected. Check that the chosen location supports Desktop, wall or rack placement and accommodates the Fanless design. Review the 150 W integrated power supply requirement against local distribution and backup arrangements. Finally, assign responsibility for configuration, monitoring, firmware governance, and recovery access. When those checks align, the GWN7801P gives the project a clearly sized managed access layer rather than an oversized or underpowered compromise. Its value comes from matching the stated switching, power, and installation characteristics to a documented site plan.

Package Contents

• GWN7801P switch
• 1.2 m (10 A) AC cable
• Ground cable
• Rubber feet × 4
• Lug ears × 2