Icom BP-290 IP67 Li-Ion Battery Pack

The Icom BP-290 IP67 Li-Ion Battery Pack is designed for fleets using the IC-F52D/IC-F62D series or IC-M85 and IC-M85E and needing a power pack with a defined protection rating when connected to an equivalently rated radio. It operates at 7.2 V, with 1910 mAh minimum capacity and 2010 mAh typical capacity. Approximate operation is 13 hours with IC-F52D/F62D under a 5:5:90 duty cycle with power save on. This combination makes it the BP-family member aimed at a specific protected equipment path. The model is also discontinued, so a buyer should connect any sourcing decision to the fleet’s lifecycle plan rather than comparing capacity alone with BP-264 or BP-265.

What the Icom BP-290 IP67 Li-Ion Battery Pack Does in Practice

BP-290 serves as the rechargeable power source for the named compatible radios. An equipment manager can match the pack with IC-F52D, IC-F62D, IC-M85, or IC-M85E before installation, then record the 7.2 V rating and 2010 mAh typical capacity on the item card. The 1910 mAh figure is the stated minimum capacity, so procurement can retain both labels without treating them as separate models. This discipline matters at sites that store professional and marine radios together because the Icom brand alone does not establish fit across every handset.

The 13-hour operating figure has a defined context: an IC-F52D/F62D radio, a 5:5:90 duty cycle, and power save enabled. An operations manager can use it as a planning reference for those radios and then compare field results with the site’s actual transmit, receive, and standby pattern. It should not be transferred automatically to IC-M85 or IC-M85E because the stated test condition names the radio series and operating settings. Keeping that context beside the figure prevents it from becoming a general promise across all compatible models.

Understanding IP67 After Installation

BP-290 carries an IP67 rating, but waterproofing after installation is equivalent to the rating of the connected radio. Deployment decisions should therefore read the battery rating and radio rating together. Where teams work near dust or water, the pre-issue check can include the BP-290 identity, handset model, and protection mark on the radio. The battery alone should not be treated as changing the protection level of the assembled equipment; its practical value appears when it is connected to a radio with an equivalent rating.

The same rule helps maintenance staff after a battery is removed and refitted. BP-290 can remain grouped with radios that have passed the protection match instead of moving to any device with a visually similar battery interface. At handover, a supervisor can register the battery and handset as one operational set. The equipment room can then inspect that same pairing on return, keeping the claimed protection connected to the actual configuration issued to the user.

Charging and Equipment-Room Setup

The pack supports BC-225 and BC-226 desktop chargers and BC-227 and BC-228 multi-chargers. This gives the equipment manager separate paths for an individual battery and a centrally prepared group. A desktop station can be assigned to a user or maintenance desk, while a multi-charger can serve shared stock or shift preparation. Before purchase or rollout, the selected charger name should be associated with BP-290 on the station label because resemblance between charger bases does not prove compatibility across the BP family.

The maximum charger voltage is 8.4 V, providing another check alongside the named charger model during receiving. BP-290 weighs 0.108 kg and measures 5 × 1.3 × 8.5 cm. Stores teams can use these values when defining a stock location or planning an equipment case. Radio and charger compatibility remain the main controls, while the dimensions and weight support internal organisation and transport planning.

Saudi-Sector Uses for BP-290

At industrial facilities and service sites, BP-290 can be issued with a compatible IC-F52D or IC-F62D to security or maintenance staff where a matched protection configuration is required. Marine or coastal operations using IC-M85 or IC-M85E can make the same model-and-rating check before issuing the set. Central stores can keep BP-290 separate from other Icom packs and place BC-225, BC-226, BC-227, or BC-228 chargers within a documented preparation path.

In a multi-shift operation, recording the 13-hour figure with its conditions gives IC-F52D/F62D teams an initial planning reference that can be adjusted against observed use. Supervisors can note the power-save setting and radio configuration when reviewing results. For fleets using IC-M85/IC-M85E, capacity, voltage, and compatibility remain the decision facts without transferring an operating-time measurement from another radio series. This separation gives each team a reference suited to its equipment rather than one expectation for every deployment.

BP-290 Compared with BP-264 and BP-265

BP-290 is distinguished within the family by IP67 and a compatibility set centred on IC-F52D/IC-F62D and IC-M85/IC-M85E. BP-264 and BP-265 are separate siblings whose names should not be used as automatic substitutes. A buyer selects BP-290 when the fleet handsets, chargers, and protection requirement all match it, retaining separate purchase lines for the siblings. This structure prevents a pack or charger base from moving to an unmatched radio and makes the reason for choosing BP-290 clear in both the purchase order and asset plan.

How Discontinued Status Affects the Decision

BP-290 is discontinued, making its purchase part of lifecycle management for the compatible radios. An operations manager can first count the IC-F52D/IC-F62D and IC-M85/IC-M85E units that remain in service, then define the actual requirement for packs and chargers tied to them. Tracking each serviceable battery against the radio it supports also helps avoid an unplanned expansion of equipment dependent on a discontinued accessory. The decision is therefore about sustaining named equipment through a traceable power and charging path, not simply adding another battery to general stock.

Receiving and Deployment Checks

Receiving begins by matching BP-290, Li-ion chemistry, the 7.2 V rating, and the 1910 mAh and 2010 mAh capacity labels. The technician can then select a radio from the compatible set, review its protection rating, and associate the battery with one of the named chargers. Weight, dimensions, and maximum charger voltage can support stock identification, while discontinued status remains visible in the lifecycle record. These steps give the manager an actionable item definition, the correct context for operating time, and clear compatibility and protection boundaries before BP-290 is approved for the site.