ZKTeco KR500H HID Proximity Card Reader IP67
An IP67 proximity access reader for HID 125 kHz and ZKAccess proximity cards, with Wiegand-Out connectivity. Epoxy-potted construction, mullion mounting and indoor/outdoor use support placement at the access point.
195.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco KR500H addresses entrance projects where the reader’s environmental protection matters alongside the credential system. This HID proximity access reader combines IP67 protection with epoxy-potted construction and supports indoor/outdoor installation. It reads HID 125 kHz and ZKAccess proximity cards, sends credential data through Wiegand-Out and uses mullion mounting. For a security or facilities manager, that combination creates a specific selection route: check the site’s cards, match the controller connection and assess the mounting position at the doorway. The higher protection rating within this reader comparison is useful when reviewing exposed access points, while the card and installation requirements keep the decision tied to the actual entrance design.
ZKTeco KR500H for demanding entrance locations
IP67 is the reader’s enclosure protection rating, and epoxy potting forms part of its construction. Those features make environmental protection a reason to consider this model when the proposed location is outdoors or otherwise exposed. Review the entrance with the installation contractor and assess the conditions at the reader’s actual position. Include the surrounding connections and door equipment in that review so the enclosure selection fits the wider installation.
Indoor/outdoor use also lets the project team consider this reader for different access locations within a property. An office building evaluating an IP67 reader may need protected hardware at a staff approach as well as inside the building. A logistics facility may be reviewing a personnel entrance used by operational teams. In each case, assess the exposure and access workflow at the individual doorway before choosing where to install the reader.
HID and ZKAccess credential planning
Authentication supports HID 125 kHz and ZKAccess proximity cards. Make the site’s actual credentials part of the selection process, especially when replacing a reader in an existing access system. Ask the integrator to test the intended cards with the proposed controller connection. Testing the actual HID 125 kHz cards connects the reader purchase to the credentials staff will present during normal work and gives security staff a practical acceptance check.
Wiegand-Out carries the credential output toward the access controller. Confirm that the receiving equipment can handle the intended reader connection and card information, then demonstrate the complete access sequence during commissioning. The demonstration should follow a card from presentation at the entrance through receipt by the access system. Keep the test aligned with the way the building’s access permissions are intended to operate.
Mullion mounting and the user’s approach
Mullion mounting is the specified installation arrangement. Review the proposed position on the doorway with the contractor before approving the mounting work. Consider where a person naturally approaches, where they can present a card and how the reader sits alongside other entrance equipment. This is useful at staff entrances where users should be able to identify the reading point without searching around the door.
In a Saudi commercial property or service building, bring the facilities team into that positioning review. They can assess the daily route taken by employees and contractors, while the installer checks the mounting surface and cable route. Coordinating those decisions before installation helps the reader location serve the intended access process. When refurbishing an existing entrance, review the Wiegand-Out connection alongside the mullion mounting before retaining the wider access system.
Choosing environmental protection within the family
The KR102E and KR300-MF siblings each carry IP65 protection, while the KR500H carries IP67. That difference gives the KR500H a clear role when the project comparison prioritises enclosure protection. Compare the credentials and controller connection at the same time: environmental suitability and access-system suitability must both fit the proposed door. Use the named models in the contractor’s comparison so the selected hardware remains clear throughout purchasing and installation.
For final acceptance, review the mullion mounting, inspect the completed connection arrangement and present the site’s intended cards to the installed reader. Have the integrator show how the credential reaches the access system. These checks give facilities and security staff a practical basis for approving the entrance, with the reader’s protective construction, credential support and mounting arrangement considered together.
Technical Specifications
- Brand
- ZKTeco
- IP Rating
- IP67
- Authentication Method
- HID 125 kHz and ZKAccess proximity cards
- Connectivity
- Wiegand-Out
- Device Type
- Proximity card access reader
- Model
- KR500H HID
- Mounting
- Mullion mounting
Frequently Asked Questions
Which cards does the KR500H support?
It supports HID 125 kHz and ZKAccess proximity cards.
What is its environmental protection rating?
The reader carries IP67 protection and uses epoxy-potted construction.
How does it connect to the access system?
It provides Wiegand-Out credential output for connection to the access controller.
What mounting arrangement does it use?
It uses mullion mounting and supports indoor/outdoor installation.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-8500 USB Fingerprint and Card Enrollment Reader
On backorder
ZKTeco ZK-InBio260Pro Two-Door Biometric Access Panel
On backorder
ZKTeco ZK-7500 USB Fingerprint Scanner
On backorder
ZKTeco ZK-QR600-V-E QR and EM-Marine RFID Reader
On backorder





Reviews
There are no reviews yet.