ZKTeco LH3000 RFID Hotel Lock Silver Finish
Silver-finish stainless-steel RFID hotel lock for 40–55 mm doors, with an American standard five-latch mortise. It accepts ISO14443 (RFID) Type-A cards at 13.56MHz, including S70 4KB and S50 1KB.
270.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco LH3000 suits a hotel door specification built around a silver finish and stainless steel hardware. Its supported door thickness is 40–55 mm, and its mechanical arrangement is an American standard mortise with 5 latches. Those details make it a model to assess against the actual room-door schedule before ordering for a floor or an entire property. The access method is ISO14443 (RFID) Type-A card, operating at 13.56MHz. For Saudi hospitality buyers, the useful starting point is a door that needs this finish, falls within this thickness range and will use the stated card technology. Bring those requirements together when discussing a proposed installation with the contractor.
ZKTeco LH3000 in a silver-finish interior
Use the silver finish as a specific part of the design brief for guest-room entrances. Place it alongside the door leaf, frame and surrounding furniture during the finish review so the decision reflects the installed setting. Stainless steel identifies the construction material, while silver identifies the appearance being selected. Keeping both in the purchasing description helps the contractor and procurement team work from the same requirement. In serviced accommodation or a hotel refurbishment, relate the chosen appearance to the areas being renewed, especially where the project will progress through different sections of the property.
A door survey that guides procurement
Start the fitting assessment with the 40–55 mm door range. Have the installation team measure the relevant leaves and record which doors are intended to receive this model. A thickness check tied to a door reference is more useful for purchasing than a general statement that the property uses hotel doors. The American standard mortise with 5 latches is another concrete item for the survey. Ask the installer to review the door preparation with this arrangement in mind, so the mechanical decision is made while the work can still be planned.
On a replacement project, review the existing door opening before setting the sequence of work. On a new-build project, pass the intended mortise arrangement to the door supplier during coordination. This gives the people responsible for the leaf and the people responsible for the lock a shared fitting requirement. Use a representative door to review how the selected hardware fits into the wider room-door work. The aim is to approve an installation approach that the contractor can follow throughout the relevant part of the project, with door measurements kept alongside the approved hardware selection.
Matching the card order to the lock
Supported card options are S70 4KB and S50 1KB within the stated ISO14443 (RFID) Type-A access method. Put the intended option into the card order rather than leaving the purchasing description at RFID alone. The operating frequency is 13.56MHz, which belongs in technical discussions about the planned card arrangement. Give reception operations and the access-system supplier the same card selection to review. That links the door equipment choice with the cards staff will handle and provides a practical reference for subsequent replenishment orders.
A Saudi hotel opening team can use a sample room to bring the card and hardware decisions together. Invite the staff responsible for reception cards and the staff responsible for doors to review the proposed arrangement at that location. In an operating property, schedule the same review around the rooms included in the refurbishment. Keep the chosen card type with the door hardware approval so that later procurement discussions have a clear point of reference. This is particularly useful when interior work, door installation and card purchasing sit with different departments or suppliers.
Choosing this model within the project
Against a shortlist containing LH1000, make the case for LH3000 through its silver finish, its own stated door range and its specified mortise. Select it where those characteristics answer the room-door brief. If D147-H Encoder is also part of the project discussion, organise the reception card equipment review alongside the door assessment, with responsibility assigned for each location. Finish the approval process by checking the silver appearance in the intended setting, confirming the measured door thickness and naming the card option. Those decisions give facilities and purchasing a practical basis for turning the selected model into a room-by-room installation order.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- ISO14443 (RFID) Type-A card
- Device Type
- RFID hotel lock
- Model
- LH3000
Frequently Asked Questions
Which doors fall within the supported thickness range?
LH3000 supports door thicknesses of 40–55 mm.
What is its finish and construction material?
It has a silver finish and stainless steel construction.
Which card options does it support?
It supports S70 4KB and S50 1KB cards, using ISO14443 (RFID) Type-A at 13.56MHz.
What mortise arrangement does it use?
An American standard mortise with 5 latches.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-ZL400 Wireless Mifare Hotel Door Lock
On backorder
ZKTeco LH5000 AA Battery RFID Hotel Lock
On backorder
ZKTeco ZK-LH6000 RFID Hotel Lock in Zinc Alloy
On backorder
ZKTeco LH4000 Zinc Alloy RFID Hotel Lock
On backorder







Reviews
There are no reviews yet.