ZKTeco LM-1802 Electromagnetic Door Lock 180 kg 12/24V
ZKTeco LM-1802 electromagnetic door lock with 180 kg holding force and 12V or 24V DC input, sized for everyday office and interior doors under access control.
Price on request
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The ZKTeco LM-1802 is an electromagnetic door lock with a 180 kg holding force and a power input that takes either 12V or 24V DC. Within the ZKTeco electric lock family it is the balanced choice for everyday single doors: offices, meeting rooms, clinic corridors, store rooms and staff-only entrances, where 180 kg is ample and a heavier lock adds cost without adding anything the door needs. The lock has no bolt, latch or strike to align, so there are no moving parts in the doorway to wear or jam. Its dual-voltage input is the practical advantage on retrofit work: whether the existing access control cabinet runs a 12V or a 24V supply, the LM-1802 can be wired to it without changing the power design.
What the ZKTeco LM-1802 does in practice
An electromagnetic lock holds a door shut through magnetic attraction between the lock body, fixed to the frame, and an iron plate fixed to the door leaf. While current flows, the two faces stay clamped together and the door resists being pulled open up to the 180 kg rating; when the access controller removes power, the magnetism collapses and the door opens freely. That makes the LM-1802 simple to drive from any access control system: a card reader, a fingerprint terminal, a keypad or a push-to-exit button only has to switch the lock supply on and off.
Because the lock releases the moment power is cut, it suits doors that must open on a fire alarm or a power interruption. Where a door must stay secured during an outage, plan a battery-backed supply rather than expecting the lock to hold on its own.
Where the LM-1802 fits in Saudi buildings
In corporate offices in Riyadh, Jeddah and Al Khobar, the LM-1802 is a natural fit for meeting rooms, finance and HR offices, and the door between reception and the open-plan floor. Clinics and polyclinics use this class of lock on pharmacy stores, medical record rooms and staff corridors, where access must be limited but the door itself is a standard interior leaf. Schools and universities apply it to laboratories, exam stores and administration wings. In retail, it secures the stock room and the cash office behind the shop floor. Small server and telecom rooms in government and private buildings are another common use, where a card or fingerprint log of who entered matters as much as the lock itself.
Choosing between the LM-1802 and its family
Pick the LM-1802 when the door is a standard single leaf and the goal is controlled entry rather than resistance to determined force. Step up to the LM-2802 when the door is a main entrance, a heavier leaf, or a location where a higher holding force is part of the security brief; the LM-2802 is the higher-force lock of the family. If the door needs a bracket to position the iron plate, the ZKTeco LMB-180U U bracket lists the LM-1802 among its compatible models, so the lock and its bracket can be ordered together.
Deployment notes
Decide on 12V or 24V before installation and match the lock to the supply the access controller already uses. Run the lock through the controller’s relay so that the reader, the exit button and any emergency release all act on the same circuit. On doors along an evacuation route, connect the lock supply so the fire alarm panel can cut it. Mount the lock body and iron plate so their faces meet squarely when the door closes; holding force depends on full face contact, and a misaligned plate will not reach the rated 180 kg.
Technical Specifications
- Brand
- ZKTeco
- Device Type
- Electromagnetic door lock
- Model
- LM-1802
- Power
- DC12V / 24V
Frequently Asked Questions
What holding force does the ZKTeco LM-1802 provide?
It is rated at 180 kg, which suits standard single interior and office doors.
Which supply voltage does the LM-1802 need?
It accepts 12V or 24V DC, so it can run from either of the two common access control supply voltages.
Is there a matching bracket for the LM-1802?
Yes. The ZKTeco LMB-180U U bracket lists the LM-1802 among its compatible models.
When should I choose the LM-2802 instead?
When the door needs a higher holding force, such as a main entrance or a heavier leaf; the LM-2802 steps up in holding force over the LM-1802.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco LMB-280ZL ZL Bracket for LM-2802 and LM-2805 Locks
On backorder
ZKTeco 350L Magnetic Lock Mounting Bracket, L-Shaped
On backorder
ZKTeco 350ZL ZL Magnetic Lock Mounting Bracket
On backorder
ZKTeco ZK-AL300-Bolt Electric Bolt Lock
On backorder





Reviews
There are no reviews yet.