ZKTeco TLEB102 Infrared Touchless Exit Switch, SUS304
A touchless infrared exit switch that opens the door to a hand within 2 – 10cm, rated DC 9 ~ 16V and 2A in a SUS304 stainless steel shell, suited to standardising exit buttons across multi-door sites.
130.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The ZKTeco TLEB102 is an infrared touchless exit switch built for sites that want every controlled door to behave the same way. A hand held within 2 – 10cm of its sensor triggers the door release, nothing needs to be pressed, and the SUS304 stainless steel faceplate stands up to constant use and cleaning. Its ratings, DC 9 ~ 16V switching voltage and a 2A rated current, fit the low-voltage access-control circuits used on most office, clinic and warehouse doors, while an operating range of -20°C ~ +50°C covers conditioned interiors with a wide margin. In the ZKTeco exit-button family it sits alongside the TLEB101 as a balanced, no-extras option: full touchless function and a metal housing, without the remote-control feature that the TLEB101-R adds. That makes it a straightforward line item when a project schedule lists dozens of exit points.
What the ZKTeco TLEB102 does at the door
An exit button answers one question for the access-control system: someone on the secure side wants out. The TLEB102 answers it without contact. Its infrared sensor watches the space just in front of the plate, and when a palm enters the 2 – 10cm window the switch changes state, signalling the controller or opening the lock circuit it is wired into. The door releases, the person walks through, and the lock re-engages on the controller’s normal timing.
For the people using it, the experience is simpler than it sounds. There is no button to press and no small target to find in a hurry; a wave close to the plate is enough. For the facility, doing away with a pressed button removes a surface that collects dirt and germs at every exit.
The specification in working terms
Sensing window
The 2 – 10cm range is short by design. Passers-by, cleaning trolleys and people waiting beside the door do not trigger a release, and only a deliberate hand movement opens the door. On doors facing busy corridors, that restraint is what keeps a touchless button from becoming a security weakness.
Electrical rating
A switching voltage of DC 9 ~ 16V spans the supply levels commonly provided by access controllers and lock power supplies. The 2A rated current is the load the switch contacts are designed to carry; check it against the lock’s draw if the TLEB102 is wired into the lock’s power line rather than a controller’s exit input.
Environment and housing
Operation from -20°C ~ +50°C, storage from -20°C ~ +65°C and operating humidity of 10% – 90% suit interior corridors, lobbies and service passages across the Kingdom, including spaces where air conditioning runs only part of the day. The SUS304 stainless steel shell resists corrosion and keeps its finish under routine disinfection.
Saudi sites that suit the TLEB102
Large, multi-door estates gain the most from a single exit-button specification. A hospital group fitting out a new wing, a ministry building with dozens of secured offices, a logistics warehouse with staff-only zones, or a university campus rolling out access control across faculties can specify the TLEB102 throughout and keep one type of spare on the shelf. In healthcare and pharmaceutical storage, the contact-free action supports infection-control routines; in food processing and central kitchens, the stainless shell copes with frequent cleaning; in banks and data rooms, the short sensing window keeps release under the deliberate control of the person leaving.
TLEB102 against the TLEB101 and TLEB101-R
On paper, the TLEB102 and TLEB101 are twins: the TLEB101 also switches at DC 9 ~ 16V with a 2A rated current, senses at 2 – 10cm and carries a SUS304 stainless steel shell. Neither has an electrical advantage over the other, so the deciding factor is the housing format that best fits your door frames and wall boxes, which our team can confirm against your drawings.
The TLEB101-R is a different proposition. The TLEB101-R pairs its sensor with a handheld remote key that opens the door from across a room, and widens infrared detection so it picks up a hand further from the plate than the TLEB102 does. Pick that model where a guard or receptionist must release a door from a desk; pick the TLEB102 where the only requirement is a dependable touchless exit and a tight sensing window is preferred.
Before you install
Each TLEB102 needs a cable run to the door’s controller or lock circuit and a supply within DC 9 ~ 16V. Fix it on the secure side at a height users reach naturally, and keep fixtures and signage out of the area directly in front of the sensor. Commission each door by testing the release with different hand positions and confirming the door relocks once the hand moves away. On projects that use the TLEB102 throughout, record the mounting height and position on the first door and repeat it on every other door, so users find the button in the same place across the building.
Technical Specifications
- Brand
- ZKTeco
- Device Type
- Infrared sensor door switch (touchless exit button)
- Model
- TLEB102
- Power
- DC 9 ~ 16V
Frequently Asked Questions
How does the TLEB102 differ from the TLEB101?
The two share the same published ratings: DC 9 ~ 16V switching voltage, a 2A rated current, a 2 - 10cm sensing window and a SUS304 stainless steel shell. The choice comes down to the housing that suits your door frame.
Will the TLEB102 open the door when someone walks past?
Its sensing window is only 2 - 10cm, so the door normally releases only when a hand is brought deliberately close to the plate.
What temperature and humidity can the TLEB102 handle?
It operates from -20°C ~ +50°C at 10% - 90% humidity and can be stored from -20°C ~ +65°C.
Can the TLEB102 be wired straight into the lock's power line?
Its contacts carry a 2A rated current, so check that against the lock's draw before wiring it directly, or connect it to the controller's exit input instead.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-SF200 Fingerprint Attendance and Access Terminal
On backorder
ZKTeco F18 Fingerprint Access Control Reader
On backorder
ZKTeco ProFAC Face and RFID Access Control Terminal
On backorder
ZKTeco ZK-SC103 RFID Standalone Access Control Terminal
On backorder





Reviews
There are no reviews yet.