ZKTeco UHF10EPro UHF RFID Reader, 865-868 MHz Long Range
A long-range ZKTeco UHF RFID reader on the 865-868 MHz band, rated for 10-20 meters with about 4 m measured in a real installation, sending reads over Wiegand or RS485.
Price on request
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The ZKTeco UHF10EPro is the long-range member of this reader family. Where the card readers beside it wait for a card held a few centimetres away, this UHF RFID reader identifies tagged vehicles as they approach a gate. It belongs to ZKTeco’s UHF10 Pro series and is the E variant, working on the 865-868 MHz band, so it must be paired with UHF tags made for that band. ZKTeco rates the series for a read range of 10-20 meters, while the reading distance it measured is 2-8 m in a handheld test and about 4 m in a real installation. A 9dBi antenna provides that reach, and the reader hands each read to the access controller over Wiegand or RS485, with USB used to set its parameters. Within the family it is the reader you buy for distance: one unit at a gate covers an approach lane that no close-range card reader can reach.
How the ZKTeco UHF10EPro works at a gate
A UHF tag, usually fixed to the windscreen, is read as the vehicle enters the reader’s field. The reader does not decide who gets in; it passes the tag number to the access controller, which checks the permission and raises the barrier. Because the driver does not have to stop, lower the window and present a card, traffic keeps moving at shift changes, and the guard on the gate is left free to deal with visitors instead of every resident or employee.
Reading the range figures correctly
The 10-20 meters figure is the series rating; ZKTeco’s own tests give 2-8 m by hand and about 4 m in a real scenario. Plan the installation around the 4 m figure: place the reader so the tag passes within that distance at the point where vehicles naturally slow down, and treat anything further as margin rather than as the design basis. Tag type, tag position on the vehicle and metal around the mounting point all affect how far a read reaches, so a site test with the actual tags before final fixing is time well spent.
Where it fits on Saudi sites
Residential compounds in Riyadh, Jeddah and the Eastern Province use readers of this class on resident gates, so registered cars pass while visitors are directed to the guard lane. Company headquarters and government campuses apply it to staff car parks, hospitals to doctor and ambulance entrances, and industrial and logistics yards to truck gates where drivers would otherwise climb down from the cab. Universities can also separate faculty parking from public parking without staffing every barrier.
Choosing between the UHF10EPro and its siblings
The KR600M, KR601M and KR602M are door card readers, built for a card presented close to the reader; the KR602M is rated IP64 while the KR600M and KR601M carry IP65. The ProID30WM and ProID40WM fill the same door role, and the FR1500S-ID adds fingerprint verification for sensitive rooms. None of them is meant to read a moving vehicle. Choose the UHF10EPro for vehicle and gate lanes and the close-range readers for pedestrian doors; many sites need both, wired to the same controllers.
Deployment notes
Confirm before ordering whether your controller expects Wiegand or RS485, because the reader works with one of the two options rather than both at once, and keep a USB connection available at commissioning to set its parameters. Order tags rated for the 865-868 MHz band so they match the reader. Aim the reader at the approach lane so tags pass squarely in front of it within the tested distance.
Technical Specifications
- Brand
- ZKTeco
- Connectivity
- Wiegand; RS485; USB
- Device Type
- UHF RFID reader
- Model
- UHF10EPro
Frequently Asked Questions
What reading distance should I plan for with the ZKTeco UHF10EPro?
ZKTeco rates the series at 10-20 meters, but its measured reading distance is 2-8 m in a handheld test and about 4 m in a real scenario. Design the gate lane around about 4 m.
Which frequency band does it use?
It works on the 865-868 MHz band, so the UHF tags you issue must be made for that band.
How does it connect to an access controller?
Over Wiegand or RS485, which are two alternative options, so confirm which one your controller needs. USB is used for setting the configuration parameters.
What antenna gain does the reader have?
The reader has a 9dBi antenna gain.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-InBio460Pro Four-Door Biometric Access Panel
On backorder
ZKTeco ZK-SF200 Fingerprint Attendance and Access Terminal
On backorder
ZKTeco F18 Fingerprint Access Control Reader
On backorder
ZKTeco F22 Fingerprint Attendance and Access Terminal
On backorder





Reviews
There are no reviews yet.