ZKTeco ZK-ProID20WE EM-Marine RFID Card Reader
EM-Marine RFID reader operating at 125 kHz with adjustable Wiegand output. IP65 protection and external LED and buzzer control support integration at access points.
90.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The ZKTeco ProID20WE provides an EM-Marine card reading point for access systems built around Wiegand. It suits an evaluation focused on retaining the site’s credential technology while adding or replacing a reader at a staff entrance. A supply requirement of 7–13 V DC and current below 80 mA gives the installer a defined basis for electrical planning. Adjustable output format and external LED and buzzer control address the connection and user indication parts of the installation. For procurement, begin with the cards employees already carry and the reader input on the access panel. Matching those requirements is the useful starting point before deciding how widely to deploy this model.
ZKTeco ProID20WE at a staff entrance
This RFID reader uses EM-Marine cards at 125 kHz, with a reading time of no more than 300 ms. The reading figure describes credential capture, so assess the complete entrance separately during acceptance testing. Check that a presented card reaches the controller and that the door responds according to its permissions. That approach keeps the review focused on actual access operation, rather than treating a light or sound from the reader as sufficient evidence that the door integration is complete.
A Saudi office operator can consider this model for departmental doors where staff credentials use EM-Marine technology. A logistics business can evaluate it for a personnel entrance connected to a Wiegand access system. For a facilities management team responsible for several buildings, matching reader selection to the existing card policy can simplify planning for further entrances. Define which doors need an EM-Marine reading point and how those doors relate to the site’s access permissions before standardising the reader across the estate.
Output format and user feedback
The Wiegand interface is adjustable between 26-bit and 34-bit formats. Select the 26-bit or 34-bit format expected by the access controller and test it with a credential issued for the site. Matching Wiegand format is particularly relevant during reader replacement, when the project may retain its existing cards and access panel. A correct format match is part of a working replacement; the shared interface name should be followed by an actual credential test before the entrance is handed back to operations.
External LED and buzzer control allows the indications to follow the wider system’s planned behaviour. Agree on the indication scheme with the security team and check it during commissioning. Reception and guarding staff can then explain what employees should expect when presenting a card. Training should follow the behaviour demonstrated at the finished entrance, giving the people responsible for daily access a consistent way to describe and investigate a reported problem.
Choosing within the access reader range
ProID20WE has an IP65 rating, as do KR100E and ProID30WE. Shared protection ratings do not establish that readers are interchangeable in a particular access design. The selection criteria for ProID20WE remain its EM-Marine credential technology, adjustable Wiegand interface and electrical requirements. Treat the model name as an identity rather than a ranking of price or system capacity. This is especially useful when preparing a replacement stock policy or placing an order covering different buildings with different access arrangements.
Installation planning and acceptance
Choose a supply within 7–13 V DC and include the reader’s current requirement in the connected load assessment. Calculate the controller, lock and other entrance equipment separately as part of the complete supply design. Consider IP65 protection when locating the reader, and review cable routing and connection protection at the same time. The finished entrance needs an installation suited to its location, including the parts beyond the reader enclosure.
Before a wider rollout, prove the arrangement at a representative door using the actual 125 kHz EM-Marine staff cards. Verify supply, Wiegand format, visible and audible indications, and the response to authorised and unauthorised credentials. Keep the accepted settings with the site’s maintenance documents and agree who manages permissions and who investigates wiring faults. These practical handover steps help security and maintenance teams take responsibility for the entrance once normal daily use begins.
Technical Specifications
- Brand
- ZKTeco
- IP Rating
- IP65
- Authentication Method
- EM-Marine card
- Connectivity
- Wiegand 26/34-bit adjustable
- Device Type
- RFID card reader
- Model
- ZK-ProID20WE
- Power
- 7–13 V DC; current <80 mA
Frequently Asked Questions
What credential technology does it use?
It reads EM-Marine cards at 125 kHz.
Which Wiegand formats are available?
Wiegand is adjustable between 26-bit and 34-bit formats.
What are its electrical requirements?
It requires 7–13 V DC with current below 80 mA.
Can the system control the indications?
The reader provides external LED and buzzer control.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco QR600-VK QR/RFID Reader with Keypad
On backorder
ZKTeco ZK-SC503 RFID Standalone Access Control Terminal
On backorder
ZKTeco FR1300 Indoor Slave Access Reader
On backorder
ZKTeco ZK-InBio260Pro Two-Door Biometric Access Panel
On backorder





Reviews
There are no reviews yet.