ZKTeco ZK-SpeedFace-M4 WiFi Access Control Terminal
Face, card and password access control terminal with IP66 protection and TCP/IP, Wiegand and RS485 interfaces. Palm verification is optional; confirm availability of the forthcoming Wi-Fi option before ordering.
1,165.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
ZKTeco SpeedFace M4 is a biometric access control terminal for facilities that want face verification alongside card and password access. Its practical balance comes from combining several authentication choices, substantial user and event storage, and IP66 protection in a terminal with wired integration interfaces. For a Saudi operations manager choosing equipment for an office entrance, warehouse access point or staff reception area, the decision starts with the required verification method and the connection to the wider access system. Face, card and password are supported, while palm verification is optional. That distinction lets a project specify the methods it actually needs instead of treating every optional capability as part of the standard configuration.
ZKTeco SpeedFace M4 verification choices
Face verification suits a workflow in which employees identify themselves at the terminal using their enrolled face. Card verification offers a credential based approach, while password verification provides another supported method. With capacity for 10,000 users, decide which verification methods each group will use and how credentials will be issued and withdrawn. An office may prioritise face enrolment for permanent employees, while a facility with established card procedures can assess the card method against those procedures. The terminal’s range of methods gives the buyer a choice of workflow; the chosen access policy still needs to be defined by the organisation.
Palm verification is an optional configuration with capacity for 3,000 palms. Specify this option when palm enrolment is part of the intended operation. Keep the distinction between face and palm capacity clear when estimating the population that will use each method. A plan centred on facial verification should use the face capacity as its sizing reference, while a palm based deployment should be scoped around the optional palm capacity.
Capacity for people and event records
The terminal accommodates 10,000 users, 10,000 faces and 10,000 cards. These are separate capacity figures, so they should be checked against the intended enrolment plan rather than added together as a larger workforce allowance. For a warehouse or distribution facility, consider the people who need access across the site’s shifts, including the staff groups that share the same entrance. For an office building, assess the enrolled population assigned to this access point. Both exercises help determine whether the terminal fits the site’s credential requirements.
Event storage is 200,000 logs, with an optional 500,000 log capacity. Choose between 200,000 logs and the optional 500,000 logs alongside the site’s arrangements for retrieving and retaining events. A busy entrance can generate repeated verification activity from the same users, so the number of people and the number of stored events answer different planning questions. The larger log option is relevant when the project calls for more local event capacity; it should be requested explicitly in the equipment configuration.
Connections and installation planning
TCP/IP, Wiegand and RS485 are the supported wired interfaces. Discuss TCP/IP, Wiegand or RS485 with the system integrator before selecting the connection route, and match the selected interface to the receiving equipment and the site’s wiring plan. Having these interface choices helps a project assess how the terminal will sit within an access control installation. The interface name alone should not replace a review of the actual integration requirements.
Wi-Fi is an optional capability covering 2.4/5GHz, with release availability pending. If wireless connectivity is a project requirement, confirm availability of that option before placing the order. Plan a wired connection through the supported interfaces where the deployment needs to proceed without depending on the optional wireless release.
Position within the ZKTeco family
IP66 protection is a useful selection point for entrances exposed to dust and water. Compared with Horus H1 and Horus H1-FP, which carry IP65 protection, SpeedFace M4 offers a higher ingress protection classification. Use this distinction when assessing the entrance environment, then review the complete installation with the integrator. For Saudi commercial premises and logistics sites, the M4’s combination of authentication methods, enrolment capacity and wired interfaces provides a clear basis for comparing proposals. Specify optional palm verification, expanded event storage and wireless availability separately so the final configuration matches the access workflow and connection plan agreed for the site.
Technical Specifications
- Brand
- ZKTeco
- Authentication Method
- Face, card, password; optional palm
- Capacity
- 10,000 users; 10,000 faces; 10,000 cards; 200,000 logs (optional 500,000); optional 3,000 palms
- Connectivity
- TCP/IP, Wiegand, RS485; optional Wi-Fi 2.4/5GHz (manufacturer page notes coming soon)
- Device Type
- Face and palm verification terminal
- Model
- ZK-SpeedFace-M4 WiFi
Frequently Asked Questions
Which authentication methods does it support?
It supports face, card and password verification, with palm verification as an optional configuration.
What are the enrolment capacities?
Capacity is 10,000 users, 10,000 faces and 10,000 cards. These separate capacities should not be added together as a larger user allowance.
How many event logs can it store?
Standard capacity is 200,000 logs, with an optional 500,000 log capacity.
Is Wi-Fi standard?
Wi-Fi covering 2.4/5GHz is optional and its release availability is pending. TCP/IP, Wiegand and RS485 are supported wired interfaces.
What ingress protection does it have?
The terminal carries an IP66 ingress protection rating.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-G1 Fingerprint Time Attendance Terminal
On backorder
ZKTeco WL30 Wi-Fi Fingerprint Attendance Terminal
On backorder
ZKTeco ZK-UFace800-3G Biometric Attendance Terminal
On backorder
ZKTeco uFace800 Plus Face and Palm Biometric Terminal
On backorder






Reviews
There are no reviews yet.