ZKTeco ZK-UFace Battery Rechargeable Backup Battery
A rechargeable lithium-ion polymer backup battery rated at 7.4 V and 2000 mAh, compatible with UFACE800. Its backup operating time is 3–4 hours.
100.00 SAR excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The ZKTeco ZK-UFace Battery provides rechargeable backup power for a compatible UFACE800 device. Rated at 7.4 V and 2000 mAh, it addresses the need to keep that device powered when its usual supply is interrupted. The backup operating time is 3–4 hours, giving an operations team a starting point for planning its response to a power interruption. Its rechargeable lithium-ion polymer chemistry makes battery condition and charging part of device maintenance. This accessory belongs in a discussion about continuity of power at the device, whether preparing an installation or assessing a replacement battery. Begin the purchasing decision with the intended device and electrical match, then include an actual backup operation test in the handover.
ZKTeco ZK-UFace Battery and power continuity
The practical purpose of the battery is to support the compatible device during an interruption to its usual power supply. Before ordering, identify which site activities depend on that device remaining operational. That exercise helps the facilities team decide how backup power fits into its response procedure. It may provide time to complete work already in progress or allow staff to monitor the interruption. The value of the accessory depends on connecting its backup role to the way the site actually uses the device.
Use the 3–4 hours of backup operation as a planning range and assess performance under the installation’s actual operating conditions during commissioning. A controlled test lets the team observe the device while it runs on the battery. Record the start of the test and the device’s operating condition so that the result can inform local procedures. This also gives maintenance staff a practical reference for later checks. Keeping that reference with the device record makes subsequent battery assessments easier to relate to the original installation.
Matching the battery to the device
Voltage and capacity answer different purchasing questions. The 7.4 V rating is an electrical matching requirement, while the 2000 mAh capacity describes stored charge. Review both when selecting a replacement, then check the intended connection before fitting it. Compatibility with UFACE800 gives the buyer a specific device to match. The battery model is ZK-IK7, and ZK-UFace Battery is the accessory name used when ordering. Keeping the battery identity and the host device identity together helps purchasing and maintenance teams describe the same requirement.
For a service request, pass the battery name, UFACE800 device identity, and 7.4 V, 2000 mAh values to the technician as part of the job description. This is useful where a facility operates different devices or where purchasing staff do not perform the installation. Confirm the match at the intended device before beginning the work and follow its maintenance instructions for the connection. After fitting the rechargeable lithium-ion polymer battery, check charging status through the device’s normal procedure. That sequence ties the procurement decision to a completed and checked maintenance task.
Planning for Saudi offices and operational sites
An administrative office using UFACE800 can assess this battery as part of its preparation for a power interruption. An educational facility or operational site using the same compatible device can evaluate the requirement according to the consequences of downtime. Establish who will check the device during an interruption and how the team will communicate the return of normal power. Assigning those responsibilities helps turn battery backup into an operating procedure that staff can use when an interruption occurs.
A different purpose from the exit button
This battery addresses backup power, whereas the EX-802 is a press-operated door opening button. Match the purchase to the task being addressed when assembling an accessory order. After battery installation, include a backup test under the site’s service procedure and retain the result with the device maintenance record. Schedule battery condition checks alongside servicing of the compatible device. When replacement is next considered, use observed battery performance and the device match to guide the decision. This keeps the accessory connected to a defined continuity requirement throughout its service use.
Technical Specifications
- Brand
- ZKTeco
- Device Type
- Backup battery
- Model
- ZK-UFace Battery
- Power
- 7.4 V / 2000 mAh
Frequently Asked Questions
What are the battery voltage and capacity?
The battery is rated at 7.4 V and 2000 mAh.
Which device is it compatible with?
It is compatible with UFACE800. Match the intended device and connection before installation.
How long is the backup operating time?
The backup operating time is 3–4 hours. Check performance on the device under actual operating conditions during handover.
What battery type does it use?
It is a rechargeable lithium-ion polymer battery with model designation ZK-IK7.

Browse ZKTeco access control and time attendance equipment in one place: face and fingerprint terminals, door controllers, card readers, electric locks, hotel locks and vehicle barriers for offices, hotels and compounds across Saudi Arabia. ZKTeco is a Chinese biometrics manufacturer
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
ZKTeco ZK-8500 USB Fingerprint and Card Enrollment Reader
On backorder
ZKTeco ZK-7500 USB Fingerprint Scanner
On backorder
ZKTeco ZK-SC103 RFID Standalone Access Control Terminal
On backorder
ZKTeco SLK20R USB Fingerprint Scanner
On backorder





Reviews
There are no reviews yet.