APC PDM3516IEC-560 Power Distribution Module, 16A, 560 cm
An APC 16 A three-phase power distribution module with the longest lead of its trio, 560 cm, ending in one IEC 309 16 A outlet for racks set well back from the panel.
Original price was: 2,840.45 SAR.2,670.02 SARCurrent price is: 2,670.02 SAR. excl. VAT
Available on backorder
RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.
Wholesale and project supply — up to 45% off











Up to 45% off wholesale supply.
Overview
The APC PDM3516IEC-560 has the longest lead of the PDM3516IEC-440, PDM3516IEC-500 and PDM3516IEC-560 trio: a 560 cm cable that reaches racks set well back from their power source, at the far end of a short row or across an aisle. Electrically it is a 16 A three-phase module for a 400 V, 50 Hz supply. Maximum line current and maximum current draw are both 16 A, a 16A breaker protects the circuit, and the cable ends in a single IEC 309 16 A outlet. Its output rating covers 230 V and 400 V three-phase. For a facility that wants a factory-built circuit to a distant cabinet without stepping up to a heavier current rating, this length closes the gap. The grey assembly is marked CE and VDE and carries a 12-month warranty.
Where the APC PDM3516IEC-560 sits among its siblings
All three modules in this group share one electrical design; the PDM3516IEC-440 and PDM3516IEC-500 simply stop sooner. Choose those when the rack is near the panel or a couple of positions away. Choose the PDM3516IEC-560 when the measured route runs past what the PDM3516IEC-500 can cover, which tends to happen when cable has to climb to an overhead tray, cross an aisle and drop back down, or work its way around obstacles under a raised floor.
If the rack’s load, rather than its distance, is the problem, length will not solve it. The PDM3532IEC models move to a higher current rating for dense compute and storage cabinets, while the PDX332IEC-1080, with its 2P + E input, serves single-phase supplies. The PDM3516IEC-560 belongs to racks whose draw sits comfortably within 16 A per phase.
What a 16 A three-phase feed means in practice
Three phases at 400 V give a rack its power on three separate lines instead of one. Spreading equipment across them keeps each line well inside the 16 A rating and keeps the upstream supply balanced, something facility engineers check when many racks share one board. A circuit of this size suits racks of switches, firewalls, video recorders, access control controllers and a modest number of servers.
The rack PDU’s input plug connects to the single IEC 309 16 A outlet at the end of the cable. Industrial IEC 309 sockets accept only plugs of their own rating and pole layout, so equipment with an unsuitable plug cannot be fed from it, a useful safeguard in rooms that see several contractors come and go over the years.
Saudi applications for the longer lead
Long, narrow equipment rooms on converted office floors, common in government and corporate buildings in Riyadh, often place the distribution board at one end and the last rack at the other. Airport and seaport operations buildings, stadium control rooms and exhibition centres face similar distances between the electrical room and their security and network racks. On industrial sites in Jubail and Ras Al Khair, control rooms are often laid out around operator consoles, which pushes the equipment racks further from the board.
Security integrators commissioning surveillance and access control on these sites can use the PDM3516IEC-560 for the outlying rack and the shorter lengths of the same module elsewhere, keeping one electrical specification across the whole project.
Installation notes
Measure the full route, counting every rise, drop and bend, and allow a small service loop at the cabinet. If the total exceeds 560 cm, relocate the rack or the feed point rather than extending the cable on site. Confirm that the supply is three-phase 400 V at 50 Hz, check that the rack PDU carries an IEC 309 16 A plug, and support the cable along its length so the outlet does not carry its weight. File the supplied installation guide with the room’s electrical records, together with a note of the CE and VDE marks.
Package Contents
- Power distribution module
- Installation guide
Technical Specifications
- Brand
- APC
- Warranty
- 1 Year
- Model
- PDM3516IEC-560
Frequently Asked Questions
Which racks suit the APC PDM3516IEC-560?
Racks set further from their source than the shorter PDM3516IEC lengths reach. Its cable is 560 cm long, and the load behind it should stay within 16 A per phase.
What supply does it need?
A 400 V three-phase supply at 50 Hz. The circuit is protected by a 16A breaker.
What connector is at the rack end?
One IEC 309 16 A outlet, which mates with a matching IEC 309 16 A plug such as the input lead of a rack PDU.
What comes with it, and what is the warranty?
The module ships with an installation guide and carries a 12-month warranty, along with CE and VDE marks.

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and
Browse brand productsDelivery across Saudi Arabia
Clear warranty
Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.
Customer Reviews
No ratings yet for this product
Only logged in customers who have purchased this product may leave a review.
Related Products
APC AP8958EU3 0U Rack PDU 16A 230V with IEC309 Cord
On backorder
APC AP6032A Rack PDU, 4 C19 Outlets, 32A IEC 60309 Input
On backorder
APC AP8886 Metered Rack PDU, 32A Three-Phase 400V
On backorder
APC APDU9941 Switched Rack PDU 30A, 200V/208V
On backorder





Reviews
There are no reviews yet.