Wholesale & retail - B2B/B2C
Free site survey in Riyadh
Shipping across the Kingdom
Warranty on all products
BrandAPC

APC PDM3532IEC-680 Power Distribution Module

Power distribution module with a 680 cm output cable, 400 V three-phase input and a single IEC 309 32 A outlet. Includes circuit monitoring and a three-pole breaker.

ModelPDM3532IEC-680

Original price was: 2,965.47 SAR.Current price is: 2,787.54 SAR. excl. VAT

Available on backorder

WhatsApp Inquiry

RISYS can programme and prepare devices before delivery. Contact us for quantity and project details.

Wholesale and project supply — up to 45% off

Minimum order5 units

Shipping and delivery icon
Fast shipping
SMSA Express logoFedEx logoNAQEL Express logoDHL logo
Product warranty icon
Genuine warranty
All products carry a one-year authorised-agent warranty.
Secure payment icon
Secure payment
madaVisaMastercardApple Pay
B2B sales icon
B2B/B2C supply

Up to 45% off wholesale supply.

Overview

APC PDM3532IEC-680 is a power distribution module for installations where the cable route matters as much as the electrical rating. Its 680 cm output cable gives the facilities team a defined reach to plan around, while the 400 V three-phase input and 32 A maximum line current establish the supply requirements. For a Saudi data room, communications facility or operations building, the purchasing decision starts with the actual route between distribution equipment and the intended connection. Choose this version when that route suits its cable length and the electrical design calls for its ratings. Circuit monitoring also makes this model relevant when the project requires attention to the supplied circuit during operation.

APC PDM3532IEC-680 in the distribution plan

This module provides a defined power connection through a single IEC 309 32 A outlet. That connection type should be matched to the receiving equipment before procurement. A facilities buyer can use it to specify the required interface clearly rather than treating all power distribution accessories as interchangeable. The outlet arrangement is particularly relevant when the intended task is feeding a compatible downstream connection. Start with the IEC 309 32 A connection and work back through the cable route to the distribution location.

Supply and circuit protection

The electrical input is 400 V three-phase at 50 Hz, with a maximum current draw of 32 A. These figures belong in the site electrical review alongside the connected load and upstream supply. A three-pole circuit breaker is part of the module configuration. The engineer should coordinate that protection with the rest of the installation and confirm that the planned operating load fits the circuit. The module’s current rating is a design boundary, so cable reach alone should never determine the purchase.

Using the output cable effectively

The 680 cm output cable is the main physical selection point for this version. Measure the intended path along its actual supports, including changes of direction and the approach to the equipment connection. A straight-line distance across a room can give a misleading impression of the reach needed. Route planning should also keep the connection accessible for later inspection. Where the path passes around cabinets or along a service route, the measured installed distance is the useful basis for choosing the module.

Circuit monitoring in daily operation

Circuit monitoring supports operational oversight of the distribution circuit. For a facilities team, that places the module within the wider process of checking electrical operation after commissioning and after equipment changes. Decide who will review the circuit and how those checks fit the site’s maintenance routine. This is particularly useful in shared technical spaces where the team responsible for power may differ from the team installing the connected equipment. Clear ownership helps keep circuit checks associated with the correct installation.

Fit for Saudi facilities

A hospital technical room, a commercial building’s IT area or a logistics site’s communications space can consider this module when the electrical design requires its connection and supply ratings. The sector name does not determine suitability; the receiving interface, supply and cable path do. For tender preparation, describe those requirements together so that the purchasing team and installation contractor evaluate the same configuration. The grey finish can also be reflected in equipment schedules when identifying the physical module during handover.

Choosing within the PDM3532IEC family

When comparing this model with PDM3532IEC-740 or PDM3532IEC-80, keep the installed cable route at the centre of the decision. Identify this module by its 680 cm output cable on purchasing documents and installation drawings to keep the delivery aligned with the planned route. The 680 cm cable on this unit should be assessed against the measured route, connection access and maintenance arrangement. This makes the choice practical: select the version that fits the planned installation rather than assuming any member of the family will serve the same location.

Procurement and handover

Before installation, confirm the input supply, connected load, mating outlet interface and final routing plan with the electrical contractor. Keep the model reference with the site equipment schedule and record the circuit served by the module. Its warranty period is 1 Year, which can be included in the project’s purchasing documentation. At handover, show the operations team the connection location and cable path so later equipment moves can be reviewed against the original arrangement.

Package Contents

  • Power distribution module
  • Installation guide

Technical Specifications

Brand
APC
Warranty
1 Year
Model
PDM3532IEC-680

Frequently Asked Questions

How long is the output cable?

The output cable is 680 cm long.

What supply does it use?

It uses a 400 V three-phase input at 50 Hz, with a maximum current draw of 32 A.

Does this module support circuit monitoring?

It supports circuit monitoring and incorporates a three-pole circuit breaker.

What outlet is provided?

The module has a single IEC 309 32 A outlet.

Brand
APC

APC UPS systems keep servers and network cabinets running through outages and unstable mains, and the wider APC range extends into the racks, power distribution and sensors around them. APC began in the United States as American Power Conversion and

Browse brand products
Shipping, Warranty and Regulatory

Delivery across Saudi Arabia

Clear warranty

Some devices or frequencies may require a permit or approval depending on the intended use and the regulations in force in the Kingdom. Requirements are clarified before project orders are fulfilled.

Customer Reviews

No ratings yet for this product

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

APC

APC EPDU1116S Switched Rack PDU 16A, 20 C13 and 4 C19

Model EPDU1116S
0U16 A3.7kW
Original price was: 3,695.59 SAR.Current price is: 3,473.85 SAR. excl. VAT Save 221.74 SAR

On backorder

Request a Quote
APC

APC APDU9959EU3 Switched Rack PDU, 16A 230V, IEC309 Cord

Model APDU9959EU3
ZeroU24
Original price was: 5,750.92 SAR.Current price is: 5,405.86 SAR. excl. VAT Save 345.06 SAR

On backorder

Request a Quote
APC

APC AP4423A Rack Transfer Switch 1U 16A, 3700 VA

Model AP4423A
1Uinput: 2 IEC 60320 C2...
Original price was: 5,225.84 SAR.Current price is: 4,912.29 SAR. excl. VAT Save 313.55 SAR

On backorder

Request a Quote
APC

APC APDU9953 Switched Rack PDU, 32A 230V, 21 C13 + 3 C19

Model APDU9953
ZeroU24
Original price was: 6,100.98 SAR.Current price is: 5,734.92 SAR. excl. VAT Save 366.06 SAR

On backorder

Request a Quote

Original price was: 2,965.47 SAR.Current price is: 2,787.54 SAR. excl. VAT